L
Lamarn

  • 4. Mai 2020
  • Beitritt 24. Jan 2014
  • In NP870Z5E - Nicht alle Tasten funktionsfähig.
    Moinsen,
    auf meinem NB funktionieren fast alle Tasten. Nur leider geben die Tastaturhelligkeitstasten keinen Murcks von sich und die Einstellungstaste gibt nach einmaliger Betätigung unendlich plusminus aus, bis ich Escape drücke (Ich habe in xev auch nachgeschaut, ob die etwas von sich geben, aber das tun die nicht.)

    Hat jemand eine Idee, wie das zu lösen ist? Ich habe schon gesucht, aber die Informationen sind meistens steinalt und vllt. kennt ja jemand eine leichte Methode, das Tastaturlayout anzupassen, so dass es funktioniert?

    Mfg, Lamarn
  • In Backlight und Keyboardbacklight-Applet vorhanden?
    Moinsen,
    es gibt seit einiger Zeit ein funktionsfähiges Applet, um die Tastaturhelligkeit einzustellen in Cinnamon. Zumindest für mein Notebook: Samsung Ativ Book 8 (NP870Z5E). Gibt es ein Applet, welches man in i3 benutzen kann?

    Ich kann auf /sys/class/leds/samsung::kbd_backlight zugreifen und dort auch in actual_brightness den Wert verändern (1-8). Seltsamerweise funktioniert sogar der Sensor, welcher die Tastaturbeleuchtung aktivert, wenn es dunkel ist.
    Wäre es vllt. möglich das Cinnamon-Applet zu integrieren?

    Mfg, Lamarn
  • In NetworkManager erkennt LAN nur nach "ip link set eno1 up"
    Ich habe auch in der letzten Zeit auf meinem NB solch ein Problem. Ich dachte ich wäre der Einzige. Im Wiki steht, dass man "ip link set ... down" durchführen muss und es anschließend funktionieren sollte. Ich muss aber meistens warten, bis das läuft. Ich wäre auch interessiert an einer Lösung.
  • In RawTherapee 4.2.9 unter Debian mit Sony Bildern -> Rauschen
    Ich kenne mich in dieser Gegend gar nicht aus, deshalb verweise ich auf einen Artikel bei ubuntuusers und hoffe das der hilft. Und hier nochmal ein Artikel zu RawTherapee.
  • In Overclocking - Amd II X6 1055T
    Ah, ja super. Ich habe über den Referenztakt (RT) übertaktet. Tut mir Leid, habe ich vergessen zu erwähnen bzw. nicht für relevant gehalten. Leider kann man den Prozessor nicht über Multiplikator übertakten, weshalb ich über RT gehen musste.
  • In Overclocking - Amd II X6 1055T
    Moinsen,
    ich habe das gerade ausprobiert. Leider zeigt es auch hier 2800MHz pro Kern an, auch wenn ich stress laufen lasse.
    Das heißt doch, dass unter Linux die Einstellungen im BIOS nicht übernommen werden, oder? Möglicherweise arbeitet der PC ja mit 3,5GHz, aber es wird nur 2,8GHz angezeigt?

    Mfg, Lamarn
  • In Overclocking - Amd II X6 1055T
    Moisen Leute,
    ich habe heute testweise mal meine CPU übertaktet, um zu schauen, wieviel da geht. Ohne 'nen ordentlichen Kühler zu holen, habe ich erstmal nur auf 3,5 GHz getaktet. Zum Übertakten habe ich das Bios benutzt.
    Wenn ich jetzt aber mit inxi -F die Angaben anzeigen lasse, dann zeigt er mir immer noch an, dass 2,8 GHz maximal benutzt werden. Ist das ein Anzeigefehler, oder muss ich noch etwas zusätzlich einrichten?
    Unter Windows habe ich mit GPU-Z nachgeschaut; es wird richtig angezeigt, obwohl dann auch im Task-Manager fehlerhaft angezeigt wird.

    Dankeschön im Voraus!
    Mit freundlichen Grüßen,
    Lamarn
  • In Mikrofon unter Arch funktioniert nicht wie es sollte
  • In Mikrofon unter Arch funktioniert nicht wie es sollte
    Moinsen,
    hat niemand eine Idee? Welche Information könnte ich auslesen, um noch etwas zu erfahren, wass vllt helfen könnte?
    Mfg, Lev
  • In Mikrofon unter Arch funktioniert nicht wie es sollte
    Moinsen Leute,
    ich habe jetzt vor einigen Wochen festgestellt, dass mein Mikro nicht laufen will. Ich habe mir jemandem gesprochen, ich übersteuerte aber gewaltig. Mein Mikrofon heißt: Microsoft Corp. LifeCam VX-3000. (Ich weiß, ist eine Webcam, aber das Mikro soll fürs erste reichen.)

    Ich konnte den Fehler darauf einschränken, dass wenn ich den Regler unterhalb von 100% habe, ich übersteuere. Ist er exakt auf 100, funzt alles ohne Probleme. Ich habe hier noch ein Fedora, welches auf einem Notebook läuft. Ich habe testweise das Mirko dort angeschlossen. Dort funktioniert alles perfekt. Ich kann den Regler dort ohne Probleme verschieben und es tut was es soll: Lautstärke regeln.

    Die Konfiguration habe ich über alsamixer und pavucontrol versucht.

    Da einige Programme, wie zB. Mumble, den Regler von selbst einstellen, wegen Lautstärkeoptimierung, übersteuere ich sehr leicht. Ich will das Mikro aber genauso wie unter Fedora benutzen. Es wäre also keine Lösung den Regler fix einzustellen o.ä.

    lsusb: 
    Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:00f5 Microsoft Corp. LifeCam VX-3000
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 003: ID 04d9:1603 Holtek Semiconductor, Inc. Keyboard
Bus 006 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Hier nochmal meine Konfig von Pulse. Es sollte eig. die Standardkonfig sein: 
    #!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
#set-default-sink output
#set-default-source input
    Falls weitere Info nötig ist, immer her mit den Fragen.
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Nagut, ich bin in letzter Zeit sehr beschäftigt, mit Studium und Co., weshalb ich es erst in einiger Zeit testen werde, wenn dann mal ein bisschen Zeit frei wird.
    Mfg, Lamarn
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Achso du meinst also, dass ich den PC "in gefrorenem" Zustand lassen soll, aber möglicherweise an die Log so kommen könnte, wenn ich über ssh verbinde. Dazu müsste ich mich aber etwas in ssh einlesen, weil ich das so gut wie nie benutze 🙂
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Ich danke bis hierher allen Beteiligten. Ich habe wieder ein laufendes System. Das war für mich das wichtigste und ihr habt mir geholfen. 😃
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Haha, keine Ahnung was los ist, aber ich habe wie gesagt nomodeset und vga=773 eingesetzt und per startx gestartet. Es läuft jetzt wieder. Sehr seltsamer Fehler. Ich habe zwischendurch immer mal upgedatet und vllt hat sich bei der Cinnamon-Oberfläche etwas getan, was ich aber bezweifle, dass der Fehler daran lag. Ich versuche jetzt mal wieder einen DM zu aktivieren.

    Edit: Ja, per DM läuft auch wieder alles.
    Ich poste sicherheitshalber noch die Xorg.0.log: 
    [    15.354] 
X.Org X Server 1.16.1
Release Date: 2014-09-21
[    15.354] X Protocol Version 11, Revision 0
[    15.354] Build Operating System: Linux 3.16.1-1-ARCH x86_64 
[    15.354] Current Operating System: Linux pluto 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[    15.354] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 rw nomodeset vga=773 initrd=../initramfs-linux.img
[    15.354] Build Date: 21 September 2014  10:53:13AM
[    15.354]  
[    15.354] Current version of pixman: 0.32.6
[    15.354] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.354] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.355] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  9 12:14:21 2014
[    15.403] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.403] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.497] (==) No Layout section.  Using the first Screen section.
[    15.497] (==) No screen section available. Using defaults.
[    15.497] (**) |-->Screen "Default Screen Section" (0)
[    15.497] (**) |   |-->Monitor "<default monitor>"
[    15.512] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.512] (==) Automatically adding devices
[    15.512] (==) Automatically enabling devices
[    15.512] (==) Automatically adding GPU devices
[    15.564] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[    15.564] 	Entry deleted from font path.
[    15.564] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[    15.596] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.596] 	Entry deleted from font path.
[    15.596] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.596] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.596] 	Entry deleted from font path.
[    15.596] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.596] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    15.596] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.596] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.596] (II) Loader magic: 0x818d80
[    15.596] (II) Module ABI versions:
[    15.596] 	X.Org ANSI C Emulation: 0.4
[    15.596] 	X.Org Video Driver: 18.0
[    15.596] 	X.Org XInput driver : 21.0
[    15.596] 	X.Org Server Extension : 8.0
[    15.598] (EE) systemd-logind: failed to get session: PID 1300 does not belong to any known session
[    15.599] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.602] (--) PCI:*(0:1:0:0) 10de:0e22:0000:0000 rev 161, Mem @ 0xf8000000/33554432, 0xd0000000/134217728, 0xdc000000/67108864, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[    15.602] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.691] (II) LoadModule: "glx"
[    15.792] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.296] (II) Module glx: vendor="NVIDIA Corporation"
[    17.296] 	compiled for 4.0.2, module version = 1.0.0
[    17.296] 	Module class: X.Org Server Extension
[    17.327] (II) NVIDIA GLX Module  343.22  Thu Sep 11 15:55:13 PDT 2014
[    17.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    17.343] 	loading driver: nvidia
[    17.343] (==) Matched nvidia as autoconfigured driver 0
[    17.343] (==) Matched nouveau as autoconfigured driver 1
[    17.343] (==) Matched nvidia as autoconfigured driver 2
[    17.343] (==) Matched nv as autoconfigured driver 3
[    17.343] (==) Matched nouveau as autoconfigured driver 4
[    17.343] (==) Matched nvidia as autoconfigured driver 5
[    17.343] (==) Matched nv as autoconfigured driver 6
[    17.343] (==) Matched modesetting as autoconfigured driver 7
[    17.343] (==) Matched fbdev as autoconfigured driver 8
[    17.343] (==) Matched vesa as autoconfigured driver 9
[    17.343] (==) Assigned the driver to the xf86ConfigLayout
[    17.343] (II) LoadModule: "nvidia"
[    17.399] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    17.456] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.456] 	compiled for 4.0.2, module version = 1.0.0
[    17.456] 	Module class: X.Org Video Driver
[    17.468] (II) LoadModule: "nouveau"
[    17.477] (WW) Warning, couldn't open module nouveau
[    17.477] (II) UnloadModule: "nouveau"
[    17.477] (II) Unloading nouveau
[    17.477] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    17.477] (II) LoadModule: "nv"
[    17.478] (WW) Warning, couldn't open module nv
[    17.478] (II) UnloadModule: "nv"
[    17.478] (II) Unloading nv
[    17.478] (EE) Failed to load module "nv" (module does not exist, 0)
[    17.478] (II) LoadModule: "modesetting"
[    17.479] (WW) Warning, couldn't open module modesetting
[    17.479] (II) UnloadModule: "modesetting"
[    17.479] (II) Unloading modesetting
[    17.479] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    17.479] (II) LoadModule: "fbdev"
[    17.479] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    17.509] (II) Module fbdev: vendor="X.Org Foundation"
[    17.509] 	compiled for 1.16.0, module version = 0.4.4
[    17.509] 	Module class: X.Org Video Driver
[    17.509] 	ABI class: X.Org Video Driver, version 18.0
[    17.509] (II) LoadModule: "vesa"
[    17.510] (WW) Warning, couldn't open module vesa
[    17.510] (II) UnloadModule: "vesa"
[    17.510] (II) Unloading vesa
[    17.510] (EE) Failed to load module "vesa" (module does not exist, 0)
[    17.510] (II) NVIDIA dlloader X Driver  343.22  Thu Sep 11 15:34:47 PDT 2014
[    17.510] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.510] (II) FBDEV: driver for framebuffer: fbdev
[    17.510] (++) using VT number 1

[    17.522] (II) Loading sub module "fb"
[    17.522] (II) LoadModule: "fb"
[    17.523] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.531] (II) Module fb: vendor="X.Org Foundation"
[    17.531] 	compiled for 1.16.1, module version = 1.0.0
[    17.531] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.531] (II) Loading sub module "wfb"
[    17.531] (II) LoadModule: "wfb"
[    17.531] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.539] (II) Module wfb: vendor="X.Org Foundation"
[    17.539] 	compiled for 1.16.1, module version = 1.0.0
[    17.539] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.539] (II) Loading sub module "ramdac"
[    17.539] (II) LoadModule: "ramdac"
[    17.539] (II) Module "ramdac" already built-in
[    17.541] (WW) Falling back to old probe method for fbdev
[    17.541] (II) Loading sub module "fbdevhw"
[    17.541] (II) LoadModule: "fbdevhw"
[    17.542] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    17.555] (II) Module fbdevhw: vendor="X.Org Foundation"
[    17.555] 	compiled for 1.16.1, module version = 0.0.2
[    17.555] 	ABI class: X.Org Video Driver, version 18.0
[    17.555] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    17.555] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    17.555] (==) NVIDIA(0): RGB weight 888
[    17.555] (==) NVIDIA(0): Default visual is TrueColor
[    17.555] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.556] (**) NVIDIA(0): Enabling 2D acceleration
[    18.350] (II) NVIDIA(0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    18.350] (II) NVIDIA(0):     3D Vision stereo.
[    18.350] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    18.351] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 460 (GF104) at PCI:1:0:0 (GPU-0)
[    18.351] (--) NVIDIA(0): Memory: 1048576 kBytes
[    18.351] (--) NVIDIA(0): VideoBIOS: 70.04.13.00.01
[    18.351] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    18.369] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 460 at PCI:1:0:0
[    18.370] (--) NVIDIA(0):     CRT-0
[    18.370] (--) NVIDIA(0):     Samsung SyncMaster (CRT-1) (boot, connected)
[    18.370] (--) NVIDIA(0):     DFP-0
[    18.370] (--) NVIDIA(0):     DFP-1
[    18.370] (--) NVIDIA(0):     DFP-2
[    18.370] (--) NVIDIA(GPU-0): CRT-0: 480.0 MHz maximum pixel clock
[    18.370] (--) NVIDIA(GPU-0): Samsung SyncMaster (CRT-1): 400.0 MHz maximum pixel clock
[    18.370] (--) NVIDIA(0): DFP-0: Internal TMDS
[    18.370] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[    18.370] (--) NVIDIA(0): DFP-1: Internal TMDS
[    18.370] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[    18.370] (--) NVIDIA(0): DFP-2: Internal TMDS
[    18.370] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[    18.370] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    18.370] (**) NVIDIA(0):     device Samsung SyncMaster (CRT-1) (Using EDID frequencies
[    18.370] (**) NVIDIA(0):     has been enabled on all display devices.)
[    18.371] (==) NVIDIA(0): 
[    18.371] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    18.371] (==) NVIDIA(0):     will be used as the requested mode.
[    18.371] (==) NVIDIA(0): 
[    18.371] (II) NVIDIA(0): Validated MetaModes:
[    18.371] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[    18.371] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    18.404] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[    18.404] (--) NVIDIA(0):     option
[    18.404] (II) UnloadModule: "fbdev"
[    18.404] (II) Unloading fbdev
[    18.404] (II) UnloadSubModule: "fbdevhw"
[    18.404] (II) Unloading fbdevhw
[    18.404] (--) Depth 24 pixmap format is 32 bpp
[    18.404] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    18.404] (II) NVIDIA:     access.
[    18.408] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    18.408] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    18.408] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    18.408] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    18.408] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    18.408] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    18.408] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    18.408] (II) NVIDIA(0):     Config Options in the README.
[    18.426] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[    18.531] (==) NVIDIA(0): Disabling shared memory pixmaps
[    18.531] (==) NVIDIA(0): Backing store enabled
[    18.531] (==) NVIDIA(0): Silken mouse enabled
[    18.533] (==) NVIDIA(0): DPMS enabled
[    18.541] (II) Loading sub module "dri2"
[    18.541] (II) LoadModule: "dri2"
[    18.541] (II) Module "dri2" already built-in
[    18.541] (II) NVIDIA(0): [DRI2] Setup complete
[    18.542] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    18.542] (--) RandR disabled
[    18.555] (II) Initializing extension GLX
[    18.962] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.963] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.963] (**) Power Button: Applying InputClass "system-keyboard"
[    18.963] (II) LoadModule: "evdev"
[    18.963] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.989] (II) Module evdev: vendor="X.Org Foundation"
[    18.990] 	compiled for 1.16.0, module version = 2.9.0
[    18.990] 	Module class: X.Org XInput Driver
[    18.990] 	ABI class: X.Org XInput driver, version 21.0
[    18.990] (II) Using input driver 'evdev' for 'Power Button'
[    18.990] (**) Power Button: always reports core events
[    18.990] (**) evdev: Power Button: Device: "/dev/input/event2"
[    18.990] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.990] (--) evdev: Power Button: Found keys
[    18.990] (II) evdev: Power Button: Configuring as keyboard
[    18.990] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[    18.990] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.990] (**) Option "xkb_rules" "evdev"
[    18.990] (**) Option "xkb_model" "pc104"
[    18.990] (**) Option "xkb_layout" "de"
[    18.990] (**) Option "xkb_variant" "nodeadkeys"
[    19.032] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    19.032] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    19.032] (**) Power Button: Applying InputClass "system-keyboard"
[    19.032] (II) Using input driver 'evdev' for 'Power Button'
[    19.032] (**) Power Button: always reports core events
[    19.032] (**) evdev: Power Button: Device: "/dev/input/event1"
[    19.032] (--) evdev: Power Button: Vendor 0 Product 0x1
[    19.032] (--) evdev: Power Button: Found keys
[    19.032] (II) evdev: Power Button: Configuring as keyboard
[    19.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[    19.032] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    19.032] (**) Option "xkb_rules" "evdev"
[    19.032] (**) Option "xkb_model" "pc104"
[    19.032] (**) Option "xkb_layout" "de"
[    19.032] (**) Option "xkb_variant" "nodeadkeys"
[    19.033] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[    19.033] (II) No input driver specified, ignoring this device.
[    19.033] (II) This device may have been added with another device file.
[    19.034] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[    19.034] (II) No input driver specified, ignoring this device.
[    19.034] (II) This device may have been added with another device file.
[    19.035] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[    19.035] (II) No input driver specified, ignoring this device.
[    19.035] (II) This device may have been added with another device file.
[    19.035] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event18)
[    19.035] (II) No input driver specified, ignoring this device.
[    19.035] (II) This device may have been added with another device file.
[    19.036] (II) config/udev: Adding input device Wacom Intuos4 4x6 (/dev/input/event13)
[    19.036] (**) Wacom Intuos4 4x6: Applying InputClass "evdev tablet catchall"
[    19.036] (**) Wacom Intuos4 4x6: Applying InputClass "Wacom USB device class"
[    19.036] (**) Wacom Intuos4 4x6: Applying InputClass "Wacom class"
[    19.036] (II) LoadModule: "wacom"
[    19.036] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[    19.051] (II) Module wacom: vendor="X.Org Foundation"
[    19.051] 	compiled for 1.16.1, module version = 0.27.0
[    19.051] 	Module class: X.Org XInput Driver
[    19.051] 	ABI class: X.Org XInput driver, version 21.0
[    19.051] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
	Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
	Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
	Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
	CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
	CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
	Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
	PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
	DTU2231, DTU1631, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
	Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
	Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
	Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
	Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
	Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
	Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
	Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
	Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
	Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
	Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, TabletPC 0x90,
	TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A, CapPlus  0x9F,
	TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5, TabletPC 0xE6,
	TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF, TabletPC 0x100,
	TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116, TabletPC 0x12C,
	TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000, TabletPC 0x5002,
	usb:172f:0024, usb:172f:0025, usb:172f:0026, usb:172f:0027,
	usb:172f:0028, usb:172f:0030, usb:172f:0031, usb:172f:0032,
	usb:172f:0033, usb:172f:0034, usb:172f:0035, usb:172f:0036,
	usb:172f:0037, usb:172f:0038, usb:172f:0039, usb:172f:0051,
	usb:172f:0052, usb:172f:0053, usb:172f:0054, usb:172f:0055,
	usb:172f:0056, usb:172f:0057, usb:172f:0058, usb:172f:0500,
	usb:172f:0501, usb:172f:0502, usb:172f:0503, usb:1b96:0001,
	usb:17ef:6004
[    19.054] (II) Using input driver 'wacom' for 'Wacom Intuos4 4x6'
[    19.054] (**) Wacom Intuos4 4x6: always reports core events
[    19.054] (**) Option "Device" "/dev/input/event13"
[    19.054] (II) Wacom Intuos4 4x6: type not specified, assuming 'stylus'.
[    19.054] (II) Wacom Intuos4 4x6: other types will be automatically added.
[    19.054] (--) Wacom Intuos4 4x6 stylus: using pressure threshold of 27 for button 1
[    19.054] (--) Wacom Intuos4 4x6 stylus: maxX=31496 maxY=19685 maxZ=2047 resX=200000 resY=200000  tilt=enabled
[    19.054] (II) Wacom Intuos4 4x6 stylus: hotplugging dependent devices.
[    19.055] (EE) Wacom Intuos4 4x6 stylus: Invalid type 'touch' for this device.
[    19.055] (EE) Wacom Intuos4 4x6 stylus: Invalid type 'pad' for this device.
[    19.055] (II) Wacom Intuos4 4x6 stylus: hotplugging completed.
[    19.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input14/event13"
[    19.120] (II) XINPUT: Adding extended input device "Wacom Intuos4 4x6 stylus" (type: STYLUS, id 8)
[    19.121] (**) Wacom Intuos4 4x6 stylus: (accel) keeping acceleration scheme 1
[    19.121] (**) Wacom Intuos4 4x6 stylus: (accel) acceleration profile 0
[    19.121] (**) Wacom Intuos4 4x6 stylus: (accel) acceleration factor: 2.000
[    19.121] (**) Wacom Intuos4 4x6 stylus: (accel) acceleration threshold: 4
[    19.122] (II) config/udev: Adding input device Wacom Intuos4 4x6 (/dev/input/mouse1)
[    19.122] (II) No input driver specified, ignoring this device.
[    19.122] (II) This device may have been added with another device file.
[    19.123] (II) config/udev: Adding input device Wacom Intuos4 4x6 Pad (/dev/input/event14)
[    19.123] (**) Wacom Intuos4 4x6 Pad: Applying InputClass "Wacom USB device class"
[    19.123] (**) Wacom Intuos4 4x6 Pad: Applying InputClass "Wacom class"
[    19.123] (II) Using input driver 'wacom' for 'Wacom Intuos4 4x6 Pad'
[    19.123] (**) Wacom Intuos4 4x6 Pad: always reports core events
[    19.123] (**) Option "Device" "/dev/input/event14"
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'stylus' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'eraser' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'cursor' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'touch' for this device.
[    19.123] (II) Wacom Intuos4 4x6 Pad: type not specified, assuming 'pad'.
[    19.123] (II) Wacom Intuos4 4x6 Pad: other types will be automatically added.
[    19.123] (II) Wacom Intuos4 4x6 Pad pad: hotplugging dependent devices.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'stylus' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'eraser' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'cursor' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'touch' for this device.
[    19.123] (II) Wacom Intuos4 4x6 Pad pad: hotplugging completed.
[    19.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input15/event14"
[    19.200] (II) XINPUT: Adding extended input device "Wacom Intuos4 4x6 Pad pad" (type: PAD, id 9)
[    19.201] (**) Wacom Intuos4 4x6 Pad pad: (accel) keeping acceleration scheme 1
[    19.201] (**) Wacom Intuos4 4x6 Pad pad: (accel) acceleration profile 0
[    19.201] (**) Wacom Intuos4 4x6 Pad pad: (accel) acceleration factor: 2.000
[    19.201] (**) Wacom Intuos4 4x6 Pad pad: (accel) acceleration threshold: 4
[    19.203] (II) config/udev: Adding input device Wacom Intuos4 4x6 Pad (/dev/input/js0)
[    19.203] (II) No input driver specified, ignoring this device.
[    19.203] (II) This device may have been added with another device file.
[    19.203] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event3)
[    19.204] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    19.204] (**)   USB Keyboard: Applying InputClass "system-keyboard"
[    19.204] (II) Using input driver 'evdev' for '  USB Keyboard'
[    19.204] (**)   USB Keyboard: always reports core events
[    19.204] (**) evdev:   USB Keyboard: Device: "/dev/input/event3"
[    19.204] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1603
[    19.204] (--) evdev:   USB Keyboard: Found keys
[    19.204] (II) evdev:   USB Keyboard: Configuring as keyboard
[    19.204] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:04D9:1603.0006/input/input4/event3"
[    19.204] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 10)
[    19.204] (**) Option "xkb_rules" "evdev"
[    19.204] (**) Option "xkb_model" "pc104"
[    19.204] (**) Option "xkb_layout" "de"
[    19.204] (**) Option "xkb_variant" "nodeadkeys"
[    19.206] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event4)
[    19.206] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    19.206] (**)   USB Keyboard: Applying InputClass "system-keyboard"
[    19.206] (II) Using input driver 'evdev' for '  USB Keyboard'
[    19.206] (**)   USB Keyboard: always reports core events
[    19.206] (**) evdev:   USB Keyboard: Device: "/dev/input/event4"
[    19.206] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1603
[    19.206] (--) evdev:   USB Keyboard: Found keys
[    19.206] (II) evdev:   USB Keyboard: Configuring as keyboard
[    19.206] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.1/0003:04D9:1603.0007/input/input5/event4"
[    19.206] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 11)
[    19.206] (**) Option "xkb_rules" "evdev"
[    19.206] (**) Option "xkb_model" "pc104"
[    19.206] (**) Option "xkb_layout" "de"
[    19.206] (**) Option "xkb_variant" "nodeadkeys"
[    19.207] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/event0)
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: Applying InputClass "evdev pointer catchall"
[    19.207] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:101a'
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: always reports core events
[    19.207] (**) evdev: Logitech Unifying Device. Wireless PID:101a: Device: "/dev/input/event0"
[    19.207] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Vendor 0x46d Product 0xc52b
[    19.207] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found 20 mouse buttons
[    19.207] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found scroll wheel(s)
[    19.207] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found relative axes
[    19.207] (--) evdev: Logitech Unifying Device. Wireless PID:101a: Found x and y relative axes
[    19.207] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Configuring as mouse
[    19.207] (II) evdev: Logitech Unifying Device. Wireless PID:101a: Adding scrollwheel support
[    19.207] (**) evdev: Logitech Unifying Device. Wireless PID:101a: YAxisMapping: buttons 4 and 5
[    19.207] (**) evdev: Logitech Unifying Device. Wireless PID:101a: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    19.207] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input1/event0"
[    19.207] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:101a" (type: MOUSE, id 12)
[    19.207] (II) evdev: Logitech Unifying Device. Wireless PID:101a: initialized for relative axes.
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: (accel) keeping acceleration scheme 1
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration profile 0
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration factor: 2.000
[    19.207] (**) Logitech Unifying Device. Wireless PID:101a: (accel) acceleration threshold: 4
[    19.207] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:101a (/dev/input/mouse0)
[    19.207] (II) No input driver specified, ignoring this device.
[    19.207] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.208] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[    19.208] (II) No input driver specified, ignoring this device.
[    19.208] (II) This device may have been added with another device file.
[    19.209] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[    19.209] (II) No input driver specified, ignoring this device.
[    19.209] (II) This device may have been added with another device file.
[    19.210] (**) Wacom Intuos4 4x6 eraser: Applying InputClass "evdev tablet catchall"
[    19.210] (**) Wacom Intuos4 4x6 eraser: Applying InputClass "Wacom USB device class"
[    19.210] (**) Wacom Intuos4 4x6 eraser: Applying InputClass "Wacom class"
[    19.210] (II) Using input driver 'wacom' for 'Wacom Intuos4 4x6 eraser'
[    19.211] (**) Wacom Intuos4 4x6 eraser: always reports core events
[    19.211] (**) Option "Device" "/dev/input/event13"
[    19.211] (**) Option "Type" "eraser"
[    19.211] (--) Wacom Intuos4 4x6 eraser: maxX=31496 maxY=19685 maxZ=2047 resX=200000 resY=200000  tilt=enabled
[    19.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input14/event13"
[    19.253] (II) XINPUT: Adding extended input device "Wacom Intuos4 4x6 eraser" (type: ERASER, id 13)
[    19.254] (**) Wacom Intuos4 4x6 eraser: (accel) keeping acceleration scheme 1
[    19.254] (**) Wacom Intuos4 4x6 eraser: (accel) acceleration profile 0
[    19.254] (**) Wacom Intuos4 4x6 eraser: (accel) acceleration factor: 2.000
[    19.254] (**) Wacom Intuos4 4x6 eraser: (accel) acceleration threshold: 4
[    19.254] (**) Wacom Intuos4 4x6 cursor: Applying InputClass "evdev tablet catchall"
[    19.254] (**) Wacom Intuos4 4x6 cursor: Applying InputClass "Wacom USB device class"
[    19.254] (**) Wacom Intuos4 4x6 cursor: Applying InputClass "Wacom class"
[    19.254] (II) Using input driver 'wacom' for 'Wacom Intuos4 4x6 cursor'
[    19.254] (**) Wacom Intuos4 4x6 cursor: always reports core events
[    19.255] (**) Option "Device" "/dev/input/event13"
[    19.255] (**) Option "Type" "cursor"
[    19.280] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input14/event13"
[    19.280] (II) XINPUT: Adding extended input device "Wacom Intuos4 4x6 cursor" (type: CURSOR, id 14)
[    19.281] (**) Wacom Intuos4 4x6 cursor: (accel) keeping acceleration scheme 1
[    19.281] (**) Wacom Intuos4 4x6 cursor: (accel) acceleration profile 0
[    19.281] (**) Wacom Intuos4 4x6 cursor: (accel) acceleration factor: 2.000
[    19.281] (**) Wacom Intuos4 4x6 cursor: (accel) acceleration threshold: 4
[    29.003] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    29.003] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    30.832] (II) NVIDIA(0): Setting mode "VGA-0: 1280x1024_75 @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[    33.289] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    33.289] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    35.682] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    35.682] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    56.694] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    56.694] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    99.956] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-1)) does not support NVIDIA
[    99.956] (II) NVIDIA(GPU-0):     3D Vision stereo.
    Ach, es fühlt sich gut an, wieder unter Linux zu arbeiten 😃

    Edit 2:
    Es bleiben doch noch einige Fehler: 
    [    15.354] Current Operating System: Linux pluto 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.598] (EE) systemd-logind: failed to get session: PID 1300 does not belong to any known session
[    17.477] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    17.478] (EE) Failed to load module "nv" (module does not exist, 0)
[    17.479] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    17.510] (EE) Failed to load module "vesa" (module does not exist, 0)
[    19.055] (EE) Wacom Intuos4 4x6 stylus: Invalid type 'touch' for this device.
[    19.055] (EE) Wacom Intuos4 4x6 stylus: Invalid type 'pad' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'stylus' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'eraser' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'cursor' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad: Invalid type 'touch' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'stylus' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'eraser' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'cursor' for this device.
[    19.123] (EE) Wacom Intuos4 4x6 Pad pad: Invalid type 'touch' for this device.
    und 
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.564] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[    15.596] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.596] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.602] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    17.477] (WW) Warning, couldn't open module nouveau
[    17.478] (WW) Warning, couldn't open module nv
[    17.479] (WW) Warning, couldn't open module modesetting
[    17.510] (WW) Warning, couldn't open module vesa
[    17.541] (WW) Falling back to old probe method for fbdev
    Wenn ich dazu einen neuen Thread aufmachen soll, dann sagt Bescheid 🙂
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Ich habe testweise das vga=773 rausgenommen. Das bewirkt aber nur, dass alles in großen Buchstaben angezeigt und nicht die volle Auflösung ausgenutzt wird. Es friert aber trotzdem nach dem Ausführen von startx ein.
    Ich habe mal ein paar Infos gesammelt.

    cpuinfo: 
    processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 0
cpu cores	: 6
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb

processor	: 1
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 1
cpu cores	: 6
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb

processor	: 2
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 5
cpu cores	: 6
apicid		: 2
initial apicid	: 5
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb

processor	: 3
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 3
cpu cores	: 6
apicid		: 3
initial apicid	: 3
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb

processor	: 4
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 2
cpu cores	: 6
apicid		: 4
initial apicid	: 2
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb

processor	: 5
vendor_id	: AuthenticAMD
cpu family	: 16
model		: 10
model name	: AMD Phenom(tm) II X6 1055T Processor
stepping	: 0
microcode	: 0x10000dc
cpu MHz		: 800.000
cache size	: 512 KB
physical id	: 0
siblings	: 6
core id		: 4
cpu cores	: 6
apicid		: 5
initial apicid	: 4
fpu		: yes
fpu_exception	: yes
cpuid level	: 6
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt cpb hw_pstate npt lbrv svm_lock nrip_save pausefilter
bugs		: tlb_mmatch apic_c1e fxsave_leak
bogomips	: 5626.81
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate cpb
    dmesg: 
    [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 rw vga=773 initrd=../initramfs-linux.img
[    0.000000] tseg: 00cff00000
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. GA-770T-USB3/GA-770T-USB3, BIOS F2 04/09/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
[    0.000000]   4 base 000100000000 mask FFFF80000000 write-back
[    0.000000]   5 base 000180000000 mask FFFFE0000000 write-back
[    0.000000]   6 base 0001A0000000 mask FFFFF0000000 write-back
[    0.000000]   7 disabled
[    0.000000] TOM2: 00000001b0000000 aka 6912M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f4470-0x000f447f] mapped at [ffff8800000f4470]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1afe00000-0x1afffffff]
[    0.000000]  [mem 0x1afe00000-0x1afffffff] page 2M
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1ac000000-0x1afdfffff]
[    0.000000]  [mem 0x1ac000000-0x1afdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
[    0.000000]  [mem 0x180000000-0x1abffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfedffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfedffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x7fcb4000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5E80 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000CFEE3000 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000CFEE30C0 0072BC (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 0x00000000CFEE0000 000040
[    0.000000] ACPI: SSDT 0x00000000CFEEA440 0011C6 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 0x00000000CFEEB640 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000CFEEB680 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000CFEEB6C0 00038A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.000000] ACPI: APIC 0x00000000CFEEA380 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1afffffff]
[    0.000000]   NODE_DATA [mem 0x1afffa000-0x1afffdfff]
[    0.000000]  [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1afffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfedffff]
[    0.000000]   node   0: [mem 0x100000000-0x1afffffff]
[    0.000000] On node 0 totalpages: 1572478
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13244 pages used for memmap
[    0.000000]   DMA32 zone: 847584 pages, LIFO batch:31
[    0.000000]   Normal zone: 11264 pages used for memmap
[    0.000000]   Normal zone: 720896 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801afc00000 s86848 r8192 d23744 u262144
[    0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1547885
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 rw vga=773 initrd=../initramfs-linux.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[    0.000000] Memory: 6043884K/6289912K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 246028K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2812.231 MHz processor
[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.81 BogoMIPS (lpj=9374103)
[    0.000027] pid_max: default: 32768 minimum: 301
[    0.000033] ACPI: Core revision 20140724
[    0.002407] ACPI: All ACPI Tables successfully acquired
[    0.020419] Security Framework initialized
[    0.020426] Yama: becoming mindful.
[    0.020905] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.022636] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023748] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023757] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024006] Initializing cgroup subsys memory
[    0.024012] Initializing cgroup subsys devices
[    0.024015] Initializing cgroup subsys freezer
[    0.024017] Initializing cgroup subsys net_cls
[    0.024019] Initializing cgroup subsys blkio
[    0.024038] CPU: Physical Processor ID: 0
[    0.024039] CPU: Processor Core ID: 0
[    0.024040] mce: CPU supports 6 MCE banks
[    0.024045] LVT offset 0 assigned for vector 0xf9
[    0.024048] process: using AMD E400 aware idle routine
[    0.024050] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.024121] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[    0.024641] ftrace: allocating 20675 entries in 81 pages
[    0.031989] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064983] smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
[    0.169127] Performance Events: AMD PMU driver.
[    0.169131] ... version:                0
[    0.169132] ... bit width:              48
[    0.169132] ... generic registers:      4
[    0.169133] ... value mask:             0000ffffffffffff
[    0.169134] ... max period:             00007fffffffffff
[    0.169135] ... fixed-purpose events:   0
[    0.169136] ... event mask:             000000000000000f
[    0.169172] process: System has AMD C1E enabled
[    0.169183] process: Switch to broadcast mode on CPU0
[    0.182697] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.189369] x86: Booting SMP configuration:
[    0.189372] .... node  #0, CPUs:      #1
[    0.202552] process: Switch to broadcast mode on CPU1
[    0.209372]  #2
[    0.222563] process: Switch to broadcast mode on CPU2
[    0.229375]  #3
[    0.242590] process: Switch to broadcast mode on CPU3
[    0.249419]  #4
[    0.262644] process: Switch to broadcast mode on CPU4
[    0.269408]  #5
[    0.282581] x86: Booted up 1 node, 6 CPUs
[    0.282585] smpboot: Total of 6 processors activated (33760.88 BogoMIPS)
[    0.282638] process: Switch to broadcast mode on CPU5
[    0.289580] devtmpfs: initialized
[    0.293071] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
[    0.294038] pinctrl core: initialized pinctrl subsystem
[    0.294072] RTC time: 16:10:12, date: 11/08/14
[    0.294142] NET: Registered protocol family 16
[    0.294238] cpuidle: using governor ladder
[    0.294240] cpuidle: using governor menu
[    0.294247] node 0 link 0: io port [a000, ffff]
[    0.294249] TOM: 00000000d0000000 aka 3328M
[    0.294251] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[    0.294252] node 0 link 0: mmio [a0000, bffff]
[    0.294254] node 0 link 0: mmio [d0000000, dfffffff]
[    0.294256] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.294257] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[    0.294259] TOM2: 00000001b0000000 aka 6912M
[    0.294260] bus: [bus 00-05] on node 0 link 0
[    0.294262] bus: 00 [io  0x0000-0xffff]
[    0.294263] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.294264] bus: 00 [mem 0xd0000000-0xdfffffff]
[    0.294264] bus: 00 [mem 0xe0600000-0xffffffff]
[    0.294265] bus: 00 [mem 0xe0100000-0xe05fffff]
[    0.294266] bus: 00 [mem 0x1b0000000-0xfcffffffff]
[    0.294358] ACPI: bus type PCI registered
[    0.294360] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.294424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.294427] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.294837] PCI: Using configuration type 1 for base access
[    0.309883] ACPI: Added _OSI(Module Device)
[    0.309885] ACPI: Added _OSI(Processor Device)
[    0.309887] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.309888] ACPI: Added _OSI(Processor Aggregator Device)
[    0.314559] ACPI: Interpreter enabled
[    0.314570] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    0.314574] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    0.314586] ACPI: (supports S0 S3 S4 S5)
[    0.314587] ACPI: Using IOAPIC for interrupt routing
[    0.314650] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.418094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.418099] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.418103] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.418283] PCI host bridge to bus 0000:00
[    0.418285] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.418287] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.418288] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.418290] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.418291] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.418293] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[    0.418301] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[    0.418311] pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
[    0.418382] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.418414] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.418445] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.418478] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[    0.418507] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.418536] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.418564] pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
[    0.418593] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.418621] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.418650] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.418679] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.418707] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.418749] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.418767] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
[    0.418776] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
[    0.418784] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
[    0.418793] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
[    0.418801] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
[    0.418810] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[    0.418828] pci 0000:00:11.0: set SATA to AHCI mode
[    0.418912] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.418924] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[    0.419003] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.419031] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.419044] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[    0.419134] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.419198] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.419217] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
[    0.419296] pci 0000:00:12.2: supports D1 D2
[    0.419297] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.419336] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.419391] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.419404] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[    0.419486] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.419519] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.419532] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[    0.419614] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.419657] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.419675] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[    0.419752] pci 0000:00:13.2: supports D1 D2
[    0.419753] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.419786] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.419827] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.419960] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.419975] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.419983] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.419992] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.420000] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.420009] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
[    0.420027] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.420029] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.420030] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.420031] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.420107] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.420127] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[    0.420189] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.420219] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.420248] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.420357] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.420414] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.420443] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.420455] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
[    0.420533] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.420564] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.420614] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.420661] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.420708] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.420758] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.420849] pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
[    0.420859] pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
[    0.420868] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
[    0.420877] pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xdfffffff 64bit pref]
[    0.420884] pci 0000:01:00.0: reg 0x24: [io  0xcf00-0xcf7f]
[    0.420890] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.420964] pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
[    0.420974] pci 0000:01:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff]
[    0.425910] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.425924] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    0.425932] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.425942] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.426069] pci 0000:02:00.0: [1131:7162] type 00 class 0x048000
[    0.426101] pci 0000:02:00.0: reg 0x10: [mem 0xfdc00000-0xfdcfffff 64bit]
[    0.426204] pci 0000:02:00.0: supports D1 D2
[    0.426206] pci 0000:02:00.0: PME# supported from D0 D1 D2
[    0.426254] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.426260] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.426263] pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
[    0.426265] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.426268] pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.426310] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[    0.426326] pci 0000:03:00.0: reg 0x10: [mem 0xfd8fe000-0xfd8fffff 64bit]
[    0.426400] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.432564] pci 0000:00:09.0: PCI bridge to [bus 03]
[    0.432578] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.432585] pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.432594] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.432730] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.432754] pci 0000:04:00.0: reg 0x10: [io  0xde00-0xdeff]
[    0.432782] pci 0000:04:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref]
[    0.432795] pci 0000:04:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
[    0.432803] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.432861] pci 0000:04:00.0: supports D1 D2
[    0.432862] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.439219] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    0.439232] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.439239] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.439248] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.439394] pci 0000:05:0e.0: [104c:8024] type 00 class 0x0c0010
[    0.439428] pci 0000:05:0e.0: reg 0x10: [mem 0xfdaff000-0xfdaff7ff]
[    0.439440] pci 0000:05:0e.0: reg 0x14: [mem 0xfdaf8000-0xfdafbfff]
[    0.439530] pci 0000:05:0e.0: supports D1 D2
[    0.439531] pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
[    0.439598] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    0.439601] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.439605] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.439609] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
[    0.439611] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.439612] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.439614] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.439616] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.439617] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[    0.439637] pci_bus 0000:00: on NUMA node 0
[    0.492694] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492813] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492847] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492881] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492949] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.492983] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.493522] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.493524] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.493526] vgaarb: loaded
[    0.493527] vgaarb: bridge control possible 0000:01:00.0
[    0.493560] PCI: Using ACPI for IRQ routing
[    0.501756] PCI: pci_cache_line_size set to 64 bytes
[    0.501762] pci 0000:00:00.0: can't claim BAR 3 [mem 0xe0000000-0xffffffff 64bit]: no compatible bridge window
[    0.501816] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.501817] e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
[    0.501907] NetLabel: Initializing
[    0.501908] NetLabel:  domain hash size = 128
[    0.501908] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.501917] NetLabel:  unlabeled traffic allowed by default
[    0.501939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.501942] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.504047] Switched to clocksource hpet
[    0.508369] pnp: PnP ACPI init
[    0.508445] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.508447] system 00:00: [io  0x0220-0x0225] has been reserved
[    0.508449] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.508452] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.600933] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.600951] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[    0.600955] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[    0.600982] system 00:01: [io  0x4100-0x411f] has been reserved
[    0.600984] system 00:01: [io  0x0228-0x022f] has been reserved
[    0.600986] system 00:01: [io  0x040b] has been reserved
[    0.600987] system 00:01: [io  0x04d6] has been reserved
[    0.600989] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.600990] system 00:01: [io  0x0c14] has been reserved
[    0.600991] system 00:01: [io  0x0c50-0x0c52] has been reserved
[    0.600993] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
[    0.600994] system 00:01: [io  0x0c6f] has been reserved
[    0.600995] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.600997] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.600998] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
[    0.601000] system 00:01: [io  0x4000-0x40fe] could not be reserved
[    0.601001] system 00:01: [io  0x4210-0x4217] has been reserved
[    0.601002] system 00:01: [io  0x0b00-0x0b0f] has been reserved
[    0.601004] system 00:01: [io  0x0b10-0x0b1f] has been reserved
[    0.601005] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.601007] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[    0.601009] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601115] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.601343] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.601501] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.601597] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.601599] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.601687] pnp 00:06: disabling [mem 0x000d1000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601689] pnp 00:06: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601691] pnp 00:06: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601692] pnp 00:06: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601694] pnp 00:06: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601696] pnp 00:06: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.601726] system 00:06: [mem 0xcfee0000-0xcfeeffff] could not be reserved
[    0.601728] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
[    0.601729] system 00:06: [mem 0xcfef0000-0xcfefffff] has been reserved
[    0.601731] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
[    0.601732] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.601734] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
[    0.601736] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.601737] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.601751] pnp: PnP ACPI: found 7 devices
[    0.608657] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
[    0.608660] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.608663] pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
[    0.608665] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
[    0.608667] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.608670] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.608672] pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
[    0.608674] pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.608676] pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.608678] pci 0000:00:09.0: PCI bridge to [bus 03]
[    0.608680] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.608682] pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.608684] pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.608687] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[    0.608688] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    0.608690] pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
[    0.608692] pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.608694] pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.608697] pci 0000:00:14.4: PCI bridge to [bus 05]
[    0.608699] pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
[    0.608703] pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
[    0.608706] pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
[    0.608712] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.608714] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.608715] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.608716] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.608718] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.608719] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.608720] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[    0.608722] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.608724] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.608725] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.608726] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[    0.608728] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.608729] pci_bus 0000:03: resource 1 [mem 0xfd800000-0xfd8fffff]
[    0.608731] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.608732] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.608733] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.608735] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.608736] pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
[    0.608738] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[    0.608739] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref]
[    0.608740] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.608742] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.608743] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.608744] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.608746] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xfebfffff]
[    0.608771] NET: Registered protocol family 2
[    0.608983] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.609182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.609473] TCP: Hash tables configured (established 65536 bind 65536)
[    0.609517] TCP: reno registered
[    0.609528] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.609569] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.609649] NET: Registered protocol family 1
[    1.007630] pci 0000:01:00.0: Video device with shadowed ROM
[    1.007763] PCI: CLS 64 bytes, default 64
[    1.007817] Unpacking initramfs...
[    1.057460] Freeing initrd memory: 3376K (ffff88007fcb4000 - ffff880080000000)
[    1.057469] PCI-DMA: Disabling AGP.
[    1.057600] PCI-DMA: aperture base @ c4000000 size 65536 KB
[    1.057601] PCI-DMA: using GART IOMMU.
[    1.057603] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.060869] microcode: CPU0: patch_level=0x010000bf
[    1.060878] microcode: CPU1: patch_level=0x010000bf
[    1.060892] microcode: CPU2: patch_level=0x010000bf
[    1.060919] microcode: CPU3: patch_level=0x010000bf
[    1.060935] microcode: CPU4: patch_level=0x010000bf
[    1.060946] microcode: CPU5: patch_level=0x010000bf
[    1.061019] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.061023] LVT offset 1 assigned for vector 0x400
[    1.061029] IBS: LVT offset 1 assigned
[    1.061050] perf: AMD IBS detected (0x0000001f)
[    1.061075] Scanning for low memory corruption every 60 seconds
[    1.061392] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.061419] Initialise system trusted keyring
[    1.061750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.062909] zpool: loaded
[    1.062911] zbud: loaded
[    1.063103] VFS: Disk quotas dquot_6.5.2
[    1.063131] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.063270] msgmni has been set to 11939
[    1.063315] Key type big_key registered
[    1.063550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.063635] io scheduler noop registered
[    1.063637] io scheduler deadline registered
[    1.063663] io scheduler cfq registered (default)
[    1.063859] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[    1.064009] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
[    1.064067] pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
[    1.064158] pcieport 0000:00:0a.0: irq 27 for MSI/MSI-X
[    1.064214] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.064228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.064250] vesafb: mode is 1024x768x8, linelength=1024, pages=3
[    1.064251] vesafb: scrolling: redraw
[    1.064253] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[    1.064263] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90010e80000, using 1536k, total 14336k
[    1.076338] Console: switching to colour frame buffer device 128x48
[    1.088332] fb0: VESA VGA frame buffer device
[    1.088367] GHES: HEST is not enabled!
[    1.088452] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.109037] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.109390] Linux agpgart interface v0.103
[    1.109435] rtc_cmos 00:02: RTC can wake from S4
[    1.109568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.109602] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.109612] ledtrig-cpu: registered to indicate activity on CPUs
[    1.109691] TCP: cubic registered
[    1.109768] NET: Registered protocol family 10
[    1.110085] NET: Registered protocol family 17
[    1.110526] Loading compiled-in X.509 certificates
[    1.110540] registered taskstats version 1
[    1.111012]   Magic number: 6:943:185
[    1.111125] rtc_cmos 00:02: setting system clock to 2014-11-08 16:10:12 UTC (1415463012)
[    1.111170] PM: Hibernation image not present or could not be loaded.
[    1.112120] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[    1.112122] Write protecting the kernel read-only data: 8192k
[    1.114048] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[    1.114918] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[    1.120828] random: systemd-tmpfile urandom read with 3 bits of entropy available
[    1.121921] systemd-udevd[67]: starting version 216
[    1.130420] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.159574] ACPI: bus type USB registered
[    1.159608] usbcore: registered new interface driver usbfs
[    1.159621] usbcore: registered new interface driver hub
[    1.160842] usbcore: registered new device driver usb
[    1.163647] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.163648] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    1.166425] SCSI subsystem initialized
[    1.166798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.167180] ehci-pci: EHCI PCI platform driver
[    1.167312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.167378] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.167386] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.167392] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.167406] ehci-pci 0000:00:12.2: debug port 1
[    1.167456] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[    1.167496] ohci-pci: OHCI PCI platform driver
[    1.168161] libata version 3.00 loaded.
[    1.177428] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.177678] hub 1-0:1.0: USB hub found
[    1.177685] hub 1-0:1.0: 6 ports detected
[    1.177841] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.177850] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    1.178000] xhci_hcd 0000:03:00.0: irq 28 for MSI/MSI-X
[    1.178004] xhci_hcd 0000:03:00.0: irq 29 for MSI/MSI-X
[    1.178007] xhci_hcd 0000:03:00.0: irq 30 for MSI/MSI-X
[    1.178011] xhci_hcd 0000:03:00.0: irq 31 for MSI/MSI-X
[    1.178013] xhci_hcd 0000:03:00.0: irq 32 for MSI/MSI-X
[    1.178016] xhci_hcd 0000:03:00.0: irq 33 for MSI/MSI-X
[    1.178019] xhci_hcd 0000:03:00.0: irq 34 for MSI/MSI-X
[    1.178261] hub 2-0:1.0: USB hub found
[    1.178269] hub 2-0:1.0: 2 ports detected
[    1.178381] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.178383] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    1.178401] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.178409] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    1.178413] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.178426] ehci-pci 0000:00:13.2: debug port 1
[    1.178471] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[    1.181461] hub 3-0:1.0: USB hub found
[    1.181471] hub 3-0:1.0: 2 ports detected
[    1.187341] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.187639] hub 4-0:1.0: USB hub found
[    1.187645] hub 4-0:1.0: 6 ports detected
[    1.187937] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.187945] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[    1.187983] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
[    1.220715] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    1.244837] hub 5-0:1.0: USB hub found
[    1.244846] hub 5-0:1.0: 3 ports detected
[    1.245089] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.245093] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6
[    1.245116] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
[    1.301465] hub 6-0:1.0: USB hub found
[    1.301473] hub 6-0:1.0: 3 ports detected
[    1.301651] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.301655] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    1.301683] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
[    1.358115] hub 7-0:1.0: USB hub found
[    1.358124] hub 7-0:1.0: 3 ports detected
[    1.358299] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.358303] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8
[    1.358318] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
[    1.410707] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.414806] hub 8-0:1.0: USB hub found
[    1.414815] hub 8-0:1.0: 3 ports detected
[    1.415024] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.415029] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[    1.415047] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
[    1.471414] hub 9-0:1.0: USB hub found
[    1.471422] hub 9-0:1.0: 2 ports detected
[    1.472546] scsi host0: pata_atiixp
[    1.472700] scsi host1: pata_atiixp
[    1.472738] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[    1.472740] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[    1.472778] ahci 0000:00:11.0: version 3.0
[    1.473020] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.473024] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.473702] scsi host2: ahci
[    1.473858] scsi host3: ahci
[    1.473989] scsi host4: ahci
[    1.474119] scsi host5: ahci
[    1.474164] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[    1.474167] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[    1.474169] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[    1.474172] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[    1.641081] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[    1.641083] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.654421] ata2.00: configured for UDMA/100
[    1.654634] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72101 A3EA PQ: 0 ANSI: 5
[    1.720656] firewire_core 0000:05:0e.0: created device fw0: GUID 003b70dd006cf049, S400
[    1.793846] ata6: SATA link down (SStatus 0 SControl 300)
[    1.793930] ata5: SATA link down (SStatus 0 SControl 300)
[    1.793981] ata4: SATA link down (SStatus 0 SControl 300)
[    1.960465] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.962184] ata3.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100
[    1.964327] ata3.00: configured for UDMA/100
[    1.966247] scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7240S  1.03 PQ: 0 ANSI: 5
[    1.979116] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.979152] sd 1:0:0:0: [sda] Write Protect is off
[    1.979154] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.979166] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.988934] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.988944] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.989267] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.012951]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    2.013345] sd 1:0:0:0: [sda] Attached SCSI disk
[    2.060428] tsc: Refined TSC clocksource calibration: 2812.440 MHz
[    2.450345] usb 6-2: new full-speed USB device number 2 using ohci-pci
[    2.619389] hidraw: raw HID events driver (C) Jiri Kosina
[    2.632190] usbcore: registered new interface driver usbhid
[    2.632196] usbhid: USB HID core driver
[    2.637393] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
[    2.693323] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input1
[    2.693421] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:12.1-2:1
[    2.866899] usb 6-3: new full-speed USB device number 3 using ohci-pci
[    3.060391] Switched to clocksource tsc
[    3.633353] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    4.046576] usb 5-2: new low-speed USB device number 3 using ohci-pci
[    4.159904] floppy0: no floppy controllers found
[    4.251634] input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:04D9:1603.0006/input/input2
[    4.251688] hid-generic 0003:04D9:1603.0006: input,hidraw2: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:12.0-2/input0
[    4.256736] input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.1/0003:04D9:1603.0007/input/input3
[    4.256865] hid-generic 0003:04D9:1603.0007: input,hidraw3: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:12.0-2/input1
[    4.794125] random: nonblocking pool is initialized
[    4.999703] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.717197] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[    5.717344] systemd[1]: Detected architecture 'x86-64'.
[    5.755838] systemd[1]: Set hostname to <pluto>.
[    6.775592] systemd[1]: Configuration file /etc/systemd/system/netctl@wlan0\x2dVSLI.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    6.991560] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
[    6.991577] systemd[1]: Cannot add dependency job for unit tlp.service, ignoring: Unit tlp.service failed to load: No such file or directory.
[    6.991610] systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
[    6.991630] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.991634] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.991929] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.991977] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.991985] systemd[1]: Starting Remote File Systems.
[    6.992129] systemd[1]: Reached target Remote File Systems.
[    6.992136] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[    6.992293] systemd[1]: Starting Encrypted Volumes.
[    6.992411] systemd[1]: Reached target Encrypted Volumes.
[    6.992431] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.992689] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.992701] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.992722] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.992728] systemd[1]: Starting Paths.
[    6.992823] systemd[1]: Reached target Paths.
[    6.992829] systemd[1]: Expecting device dev-sda5.device...
[    6.992940] systemd[1]: Expecting device dev-sda7.device...
[    6.993051] systemd[1]: Starting Root Slice.
[    6.998509] systemd[1]: Created slice Root Slice.
[    6.998520] systemd[1]: Starting Delayed Shutdown Socket.
[    6.998664] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.998671] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    6.998826] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    6.998832] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.999000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.999006] systemd[1]: Starting Journal Socket (/dev/log).
[    6.999147] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.999154] systemd[1]: Starting LVM2 metadata daemon socket.
[    6.999296] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.999305] systemd[1]: Starting udev Kernel Socket.
[    6.999427] systemd[1]: Listening on udev Kernel Socket.
[    6.999435] systemd[1]: Starting udev Control Socket.
[    6.999560] systemd[1]: Listening on udev Control Socket.
[    6.999567] systemd[1]: Starting User and Session Slice.
[    6.999827] systemd[1]: Created slice User and Session Slice.
[    6.999837] systemd[1]: Starting Journal Socket.
[    6.999959] systemd[1]: Listening on Journal Socket.
[    6.999973] systemd[1]: Starting System Slice.
[    7.000194] systemd[1]: Created slice System Slice.
[    7.000207] systemd[1]: Started File System Check on Root Device.
[    7.000212] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    7.000473] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.000483] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.000975] systemd[1]: Mounting Debug File System...
[    7.032053] systemd[1]: Starting Set Up Additional Binary Formats...
[    7.032564] systemd[1]: Mounting POSIX Message Queue File System...
[    7.033043] systemd[1]: Starting Setup Virtual Console...
[    7.053976] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.054533] systemd[1]: Mounting Huge Pages File System...
[    7.073675] systemd[1]: Starting Load Kernel Modules...
[    7.074143] systemd[1]: Starting udev Coldplug all Devices...
[    7.074626] systemd[1]: Starting system-netctl.slice.
[    7.074931] systemd[1]: Created slice system-netctl.slice.
[    7.074946] systemd[1]: Starting system-getty.slice.
[    7.075195] systemd[1]: Created slice system-getty.slice.
[    7.075209] systemd[1]: Starting Journal Service...
[    7.075780] systemd[1]: Started Journal Service.
[    7.395344] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    7.921011] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    8.009313] vboxdrv: Found 6 processor cores.
[    8.009543] vboxdrv: fAsync=0 offMin=0x36b offMax=0x19c9
[    8.009605] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[    8.009606] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[    8.245045] systemd-udevd[196]: starting version 216
[    8.867871] ACPI: processor limited to max C-state 1
[    8.874676] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.928041] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    8.928047] ACPI: Power Button [PWRB]
[    8.928110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    8.928113] ACPI: Power Button [PWRF]
[    9.014668] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140724/utaddress-258)
[    9.014678] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.034874] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    9.034930] sp5100_tco: PCI Revision ID: 0x3c
[    9.034948] sp5100_tco: failed to find MMIO address, giving up.
[    9.043565] wmi: Mapper loaded
[    9.065608] MCE: In-kernel MCE decoding enabled.
[    9.108313] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.142022] EDAC MC: Ver: 3.0.0
[    9.180299] parport_pc 00:04: reported by Plug and Play ACPI
[    9.180366] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.280468] AMD64 EDAC driver v3.4.0
[    9.280528] EDAC amd64: DRAM ECC disabled.
[    9.280571] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
[    9.856656] [drm] Initialized drm 1.1.0 20060810
[    9.860828] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    9.860837] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.861040] r8169 0000:04:00.0: irq 35 for MSI/MSI-X
[    9.861195] r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c62000, 6c:f0:49:7d:af:a8, XID 083000c0 IRQ 35
[    9.861198] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    9.938818] snd_hda_intel 0000:01:00.1: Disabling MSI
[    9.938840] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    9.989515] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.989529] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.989536] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.989541] sound hdaudioC0D0:    mono: mono_out=0x0
[    9.989546] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    9.989551] sound hdaudioC0D0:    inputs:
[    9.989557] sound hdaudioC0D0:      Rear Mic=0x18
[    9.989563] sound hdaudioC0D0:      Front Mic=0x19
[    9.989568] sound hdaudioC0D0:      Line=0x1a
[    9.989572] sound hdaudioC0D0:      CD=0x1c
[    9.989577] sound hdaudioC0D0:    dig-in=0x1f
[   10.017132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input6
[   10.017743] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   10.017837] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   10.017929] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   10.018020] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   10.018117] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   10.018235] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   10.018329] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   10.123306] kvm: Nested Virtualization enabled
[   10.123316] kvm: Nested Paging enabled
[   10.184164] r8169 0000:04:00.0 enp4s0: renamed from eth0
[   10.218562] systemd-udevd[198]: renamed network interface eth0 to enp4s0
[   10.310386] ppdev: user-space parallel port driver
[   10.635197] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   10.635260] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   10.635311] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[   10.635360] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[   10.988747] input: Wacom Intuos4 4x6 as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input18
[   10.988869] input: Wacom Intuos4 4x6 Pad as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input19
[   11.005148] mousedev: PS/2 mouse device common for all mice
[   11.079398] media: Linux media interface: v0.10
[   11.110717] Linux video capture interface: v2.00
[   11.118219] gspca_main: v2.14.0 registered
[   11.125795] gspca_main: sonixj-2.14.0 probing 045e:00f5
[   11.136756] input: sonixj as /devices/pci0000:00/0000:00:12.1/usb6/6-3/input/input20
[   11.137124] usbcore: registered new interface driver sonixj
[   11.155751] wacom 0003:056A:00B8.0005: hidraw4: USB HID v1.00 Mouse [Tablet PTK-440] on usb-0000:00:12.0-1/input0
[   11.412684] Adding 5119996k swap on /dev/sda5.  Priority:-1 extents:1 across:5119996k FS
[   11.414435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[   11.915529] nvidia: module license 'NVIDIA' taints kernel.
[   11.915535] Disabling lock debugging due to kernel taint
[   11.929083] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   11.929451] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   11.929458] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  343.22  Thu Sep 11 16:27:43 PDT 2014
[   11.932680] usbcore: registered new interface driver snd-usb-audio
[   11.937749] floppy0: no floppy controllers found
[   12.508096] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[   12.570293] microcode: CPU0: new patch_level=0x010000dc
[   12.570328] microcode: CPU1: new patch_level=0x010000dc
[   12.570356] microcode: CPU2: new patch_level=0x010000dc
[   12.570394] microcode: CPU3: new patch_level=0x010000dc
[   12.570431] microcode: CPU4: new patch_level=0x010000dc
[   12.570469] microcode: CPU5: new patch_level=0x010000dc
[   12.651290] systemd-journald[162]: Received request to flush runtime journal from PID 1
[   12.795875] systemd-journald[162]: File /var/log/journal/ca63e88b9d04418baa40a91d163ba5c8/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   13.609173] cfg80211: Calling CRDA to update world regulatory domain
[   13.914152] cfg80211: World regulatory domain updated:
[   13.914162] cfg80211:  DFS Master region: unset
[   13.914167] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.914174] cfg80211:   (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[   13.914180] cfg80211:   (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[   13.914186] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   13.914190] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   13.914196] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.914201] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.914205] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.914211] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.820334] r8169 0000:04:00.0: Refused to change power state, currently in D3
[   14.906745] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.911141] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.915427] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.919604] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.923686] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.927642] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.931503] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.935201] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.938816] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.942402] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.945948] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.971758] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.975126] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.978390] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.981563] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.984634] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.987616] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.990518] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.993360] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   14.996146] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.022053] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.024713] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.027359] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.029935] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.032449] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.034889] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.037350] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.039643] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.041892] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.044083] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.046223] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.048331] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.050436] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.052505] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.054472] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.056441] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.058334] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.060163] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.062011] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.063829] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.730182] r8169 0000:04:00.0 enp4s0: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
[   15.731945] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.733887] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.735644] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.737367] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.739035] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.740674] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.742260] r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
[   15.744323] r8169 0000:04:00.0 enp4s0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[   15.745273] r8169 0000:04:00.0 enp4s0: link up
[   24.718715] systemd-journald[162]: File /var/log/journal/ca63e88b9d04418baa40a91d163ba5c8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[  240.249178] INFO: task acpid:2192 blocked for more than 120 seconds.
[  240.251600]       Tainted: P           O   3.17.2-1-ARCH #1
[  240.254168] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  240.256906] acpid           D 0000000000000000     0  2192      1 0x00000000
[  240.256916]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  240.256925]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  240.256932]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  240.256945] Call Trace:
[  240.256993]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  240.257005]  [<ffffffff81538179>] schedule+0x29/0x70
[  240.257013]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  240.257020]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  240.257027]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  240.257037]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  240.257050]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  240.257067]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  240.257085]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  240.257097]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  240.257114]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  240.257134]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  240.257151]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  240.257160]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  240.257167]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  240.257175]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  240.257183]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  240.257191]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  240.257208]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  240.257219]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  240.257229]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  240.257239]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  240.257248]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  240.257257]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  240.257264]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  240.257272]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  240.257280]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  240.257287]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  240.257293]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  240.257303]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  240.257310]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  240.257317]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  240.257324]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  240.257332]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  240.257340]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  240.257349]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
[  360.225639] INFO: task acpid:2192 blocked for more than 120 seconds.
[  360.228475]       Tainted: P           O   3.17.2-1-ARCH #1
[  360.231452] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  360.234560] acpid           D 0000000000000000     0  2192      1 0x00000000
[  360.234570]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  360.234578]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  360.234585]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  360.234592] Call Trace:
[  360.234632]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  360.234642]  [<ffffffff81538179>] schedule+0x29/0x70
[  360.234650]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  360.234658]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  360.234665]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  360.234674]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  360.234687]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  360.234705]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  360.234722]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  360.234733]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  360.234750]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  360.234767]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  360.234783]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  360.234791]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  360.234799]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  360.234806]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  360.234814]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  360.234822]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  360.234839]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  360.234851]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  360.234859]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  360.234865]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  360.234874]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  360.234882]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  360.234889]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  360.234897]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  360.234904]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  360.234911]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  360.234918]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  360.234926]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  360.234933]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  360.234940]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  360.234946]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  360.234955]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  360.234962]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  360.234970]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
[  480.202144] INFO: task acpid:2192 blocked for more than 120 seconds.
[  480.205388]       Tainted: P           O   3.17.2-1-ARCH #1
[  480.208699] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  480.212219] acpid           D 0000000000000000     0  2192      1 0x00000000
[  480.212229]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  480.212237]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  480.212244]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  480.212251] Call Trace:
[  480.212289]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  480.212300]  [<ffffffff81538179>] schedule+0x29/0x70
[  480.212308]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  480.212315]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  480.212322]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  480.212332]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  480.212344]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  480.212364]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  480.212373]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  480.212379]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  480.212388]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  480.212397]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  480.212406]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  480.212410]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  480.212414]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  480.212418]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  480.212422]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  480.212426]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  480.212435]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  480.212441]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  480.212445]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  480.212449]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  480.212454]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  480.212458]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  480.212462]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  480.212466]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  480.212470]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  480.212473]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  480.212477]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  480.212481]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  480.212485]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  480.212489]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  480.212492]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  480.212497]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  480.212501]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  480.212505]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
[  600.181951] INFO: task acpid:2192 blocked for more than 120 seconds.
[  600.185599]       Tainted: P           O   3.17.2-1-ARCH #1
[  600.189300] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  600.193147] acpid           D 0000000000000000     0  2192      1 0x00000000
[  600.193157]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  600.193166]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  600.193173]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  600.193186] Call Trace:
[  600.193225]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  600.193235]  [<ffffffff81538179>] schedule+0x29/0x70
[  600.193243]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  600.193251]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  600.193258]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  600.193267]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  600.193280]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  600.193297]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  600.193315]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  600.193326]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  600.193343]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  600.193361]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  600.193377]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  600.193385]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  600.193393]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  600.193400]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  600.193408]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  600.193416]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  600.193433]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  600.193444]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  600.193453]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  600.193463]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  600.193471]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  600.193480]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  600.193487]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  600.193494]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  600.193502]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  600.193508]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  600.193515]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  600.193524]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  600.193531]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  600.193537]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  600.193544]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  600.193553]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  600.193564]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  600.193572]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
[  720.161787] INFO: task acpid:2192 blocked for more than 120 seconds.
[  720.165867]       Tainted: P           O   3.17.2-1-ARCH #1
[  720.169889] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  720.173895] acpid           D 0000000000000000     0  2192      1 0x00000000
[  720.173905]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  720.173913]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  720.173920]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  720.173927] Call Trace:
[  720.173965]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  720.173976]  [<ffffffff81538179>] schedule+0x29/0x70
[  720.173984]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  720.173991]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  720.173998]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  720.174007]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  720.174020]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  720.174037]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  720.174055]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  720.174066]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  720.174082]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  720.174099]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  720.174115]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  720.174123]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  720.174130]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  720.174138]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  720.174145]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  720.174154]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  720.174170]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  720.174181]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  720.174189]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  720.174196]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  720.174205]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  720.174213]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  720.174220]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  720.174228]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  720.174235]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  720.174241]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  720.174248]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  720.174257]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  720.174264]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  720.174270]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  720.174277]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  720.174285]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  720.174293]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  720.174300]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
[  840.141622] INFO: task acpid:2192 blocked for more than 120 seconds.
[  840.145802]       Tainted: P           O   3.17.2-1-ARCH #1
[  840.149997] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  840.154309] acpid           D 0000000000000000     0  2192      1 0x00000000
[  840.154319]  ffff88007ff07890 0000000000000086 ffff8800cafeb250 00000000000145c0
[  840.154327]  ffff88007ff07fd8 00000000000145c0 ffffffff8181b500 ffff8800cafeb250
[  840.154335]  ffff8800cb174b40 ffff8801a5f90800 0000000000000000 0000000000000020
[  840.154347] Call Trace:
[  840.154393]  [<ffffffffa00d8029>] ? usb_hcd_submit_urb+0xa9/0xb10 [usbcore]
[  840.154404]  [<ffffffff81538179>] schedule+0x29/0x70
[  840.154412]  [<ffffffff815385e6>] schedule_preempt_disabled+0x16/0x20
[  840.154420]  [<ffffffff8153a0a5>] __mutex_lock_slowpath+0xe5/0x250
[  840.154427]  [<ffffffff8153a227>] mutex_lock+0x17/0x30
[  840.154437]  [<ffffffffa05359c7>] wacom_resume+0x27/0x50 [wacom]
[  840.154449]  [<ffffffffa01c9b2a>] hid_resume_common+0xba/0x110 [usbhid]
[  840.154467]  [<ffffffffa00d2531>] ? usb_port_resume+0x171/0x7b0 [usbcore]
[  840.154485]  [<ffffffffa00df0f0>] ? usb_runtime_suspend+0x80/0x80 [usbcore]
[  840.154496]  [<ffffffffa01c9bbd>] hid_resume+0x3d/0x70 [usbhid]
[  840.154513]  [<ffffffffa00ddce6>] usb_resume_interface.isra.6+0xb6/0x120 [usbcore]
[  840.154531]  [<ffffffffa00ddfb4>] usb_resume_both+0x74/0x140 [usbcore]
[  840.154548]  [<ffffffffa00df10a>] usb_runtime_resume+0x1a/0x20 [usbcore]
[  840.154556]  [<ffffffff813b5022>] __rpm_callback+0x32/0x70
[  840.154564]  [<ffffffff813b5086>] rpm_callback+0x26/0xa0
[  840.154571]  [<ffffffff813b6471>] rpm_resume+0x4b1/0x690
[  840.154579]  [<ffffffff813b631a>] rpm_resume+0x35a/0x690
[  840.154588]  [<ffffffff813b6690>] __pm_runtime_resume+0x40/0x60
[  840.154605]  [<ffffffffa00ddab2>] usb_autopm_get_interface+0x22/0x60 [usbcore]
[  840.154616]  [<ffffffffa01c9979>] usbhid_open+0x59/0xe0 [usbhid]
[  840.154625]  [<ffffffffa0534155>] wacom_open+0x35/0x50 [wacom]
[  840.154635]  [<ffffffff813dafc9>] input_open_device+0x79/0xa0
[  840.154644]  [<ffffffffa04f11d1>] evdev_open+0x1b1/0x200 [evdev]
[  840.154653]  [<ffffffff811cbdce>] chrdev_open+0xae/0x1f0
[  840.154660]  [<ffffffff811cbd20>] ? cdev_put+0x30/0x30
[  840.154669]  [<ffffffff811c4bb2>] do_dentry_open+0x1d2/0x320
[  840.154676]  [<ffffffff811c50a1>] finish_open+0x31/0x50
[  840.154683]  [<ffffffff811d5712>] do_last.isra.36+0x652/0xe50
[  840.154689]  [<ffffffff811d5fd7>] path_openat+0xc7/0x6e0
[  840.154699]  [<ffffffff810d0680>] ? __call_rcu.constprop.58+0x290/0x290
[  840.154706]  [<ffffffff811d792d>] do_filp_open+0x4d/0xc0
[  840.154713]  [<ffffffff811d251c>] ? getname_flags+0x2c/0x130
[  840.154720]  [<ffffffff811e4b87>] ? __alloc_fd+0xa7/0x130
[  840.154729]  [<ffffffff811c637e>] do_sys_open+0x14e/0x250
[  840.154739]  [<ffffffff811c649e>] SyS_open+0x1e/0x20
[  840.154747]  [<ffffffff8153c7a9>] system_call_fastpath+0x16/0x1b
    filesystems: 
    nodev	sysfs
nodev	rootfs
nodev	ramfs
nodev	bdev
nodev	proc
nodev	cgroup
nodev	cpuset
nodev	tmpfs
nodev	devtmpfs
nodev	binfmt_misc
nodev	debugfs
nodev	securityfs
nodev	sockfs
nodev	pipefs
nodev	configfs
nodev	devpts
nodev	hugetlbfs
nodev	autofs
nodev	pstore
nodev	mqueue
	ext3
	ext2
	ext4
    lsblk: 
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 931,5G  0 disk 
├─sda1   8:1    0   100M  0 part 
├─sda2   8:2    0   498G  0 part 
├─sda3   8:3    0     1K  0 part 
├─sda5   8:5    0   4,9G  0 part [SWAP]
├─sda6   8:6    0    44G  0 part /
└─sda7   8:7    0 384,5G  0 part /home
sr0     11:0    1  1024M  0 rom
    lsmod: 
    Module                  Size  Used by
cfg80211              445286  0 
rfkill                 18867  1 cfg80211
snd_usb_audio         139412  0 
snd_usbmidi_lib        27571  1 snd_usb_audio
snd_rawmidi            26806  1 snd_usbmidi_lib
snd_seq_device         13132  1 snd_rawmidi
nvidia              11024851  0 
gspca_sonixj           33646  0 
gspca_main             34964  1 gspca_sonixj
joydev                 17063  0 
videodev              135040  2 gspca_sonixj,gspca_main
media                  18365  1 videodev
wacom                  64086  0 
mousedev               17272  0 
snd_hda_codec_hdmi     49213  4 
drm                   259106  2 nvidia
snd_hda_codec_realtek    67469  1 
snd_hda_codec_generic    63126  1 snd_hda_codec_realtek
evdev                  21544  2 
ppdev                  16782  0 
snd_hda_intel          26387  0 
mac_hid                12633  0 
r8169                  68207  0 
kvm_amd                59131  0 
snd_hda_controller     26938  1 snd_hda_intel
kvm                   417429  1 kvm_amd
snd_hda_codec         108536  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
mii                    12675  1 r8169
snd_hwdep              17244  2 snd_usb_audio,snd_hda_codec
snd_pcm                88487  5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
edac_core              47125  0 
shpchp                 35210  0 
snd_timer              26614  1 snd_pcm
k10temp                12618  0 
serio_raw              12849  0 
snd                    73436  12 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
parport_pc             26351  0 
hwmon                  12930  1 k10temp
wmi                    17339  0 
parport                35749  2 ppdev,parport_pc
sp5100_tco             12864  0 
i2c_piix4              20857  0 
i2c_core               50152  4 drm,i2c_piix4,nvidia,videodev
edac_mce_amd           21166  0 
soundcore              13031  2 snd,snd_hda_codec
button                 12953  0 
acpi_cpufreq           17218  0 
processor              27777  1 acpi_cpufreq
vboxdrv               348377  0 
smsmdtv                51247  0 
rc_core                22437  1 smsmdtv
aic94xx                82059  0 
libsas                 72372  1 aic94xx
scsi_transport_sas     33468  2 libsas,aic94xx
ext4                  497696  2 
crc16                  12343  1 ext4
mbcache                17171  1 ext4
jbd2                   86417  1 ext4
hid_generic            12393  0 
hid_logitech_dj        17192  0 
usbhid                 48603  0 
hid                   102220  4 wacom,hid_generic,usbhid,hid_logitech_dj
sd_mod                 44398  4 
sr_mod                 21903  0 
crc_t10dif             12431  1 sd_mod
cdrom                  47479  1 sr_mod
crct10dif_common       12356  1 crc_t10dif
ata_generic            12490  0 
pata_acpi              12771  0 
atkbd                  22254  0 
libps2                 12739  1 atkbd
ahci                   33291  0 
libahci                27158  1 ahci
pata_atiixp            12747  3 
ohci_pci               12808  0 
ohci_hcd               43006  1 ohci_pci
ehci_pci               12512  0 
xhci_hcd              152972  0 
ehci_hcd               69939  1 ehci_pci
libata                181518  6 ahci,pata_acpi,libahci,ata_generic,libsas,pata_atiixp
scsi_mod              147543  6 scsi_transport_sas,libata,libsas,aic94xx,sd_mod,sr_mod
firewire_ohci          43373  0 
usbcore               199381  10 snd_usb_audio,gspca_sonixj,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,gspca_main,usbhid,xhci_hcd
firewire_core          56700  1 firewire_ohci
crc_itu_t              12347  1 firewire_core
usb_common             12440  1 usbcore
i8042                  18002  1 libps2
serio                  18282  4 serio_raw,atkbd,i8042
    lspci: 
    00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF104 High Definition Audio Controller (rev a1)
02:00.0 Multimedia controller: Philips Semiconductors SAA7162 (rev 01)
03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
05:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
    uname: 
    Linux pluto 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64 GNU/Linux
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Die Xorg.0.log ist leider leer, genauso wie wenn ich startx ausführe.
    Ich denke ich muss startx so ausführen: 
    startx &> startx.log
    oder?
    Und intel-ucode ist auf dieser Maschine nicht installiert.

    Ich kann vllt. den Output von journalctl hier einfügen. Bin gleich wieder da.
    Edit: 
    -- Logs begin at Do 2014-01-30 21:55:05 CET, end at Sa 2014-11-08 16:35:55 CET. --
Nov 08 16:35:33 pluto systemd-journal[162]: Runtime journal is using 8.0M (max allowed 298.6M, trying to leave 447.9M free of 2.9G available → current limit 298.6M).
Nov 08 16:35:33 pluto systemd-journal[162]: Runtime journal is using 8.0M (max allowed 298.6M, trying to leave 447.9M free of 2.9G available → current limit 298.6M).
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys cpuset
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys cpu
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys cpuacct
Nov 08 16:35:33 pluto kernel: Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
Nov 08 16:35:33 pluto kernel: Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 rw vga=773 initrd=../initramfs-linux.img
Nov 08 16:35:33 pluto kernel: tseg: 00cff00000
Nov 08 16:35:33 pluto kernel: e820: BIOS-provided physical RAM map:
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
Nov 08 16:35:33 pluto kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
Nov 08 16:35:33 pluto kernel: NX (Execute Disable) protection: active
Nov 08 16:35:33 pluto kernel: SMBIOS 2.4 present.
Nov 08 16:35:33 pluto kernel: DMI: Gigabyte Technology Co., Ltd. GA-770T-USB3/GA-770T-USB3, BIOS F2 04/09/2010
Nov 08 16:35:33 pluto kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 08 16:35:33 pluto kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 08 16:35:33 pluto kernel: AGP: No AGP bridge found
Nov 08 16:35:33 pluto kernel: e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
Nov 08 16:35:33 pluto kernel: MTRR default type: uncachable
Nov 08 16:35:33 pluto kernel: MTRR fixed ranges enabled:
Nov 08 16:35:33 pluto kernel:   00000-9FFFF write-back
Nov 08 16:35:33 pluto kernel:   A0000-BFFFF uncachable
Nov 08 16:35:33 pluto kernel:   C0000-C7FFF write-protect
Nov 08 16:35:33 pluto kernel:   C8000-FFFFF uncachable
Nov 08 16:35:33 pluto kernel: MTRR variable ranges enabled:
Nov 08 16:35:33 pluto kernel:   0 base 000000000000 mask FFFF80000000 write-back
Nov 08 16:35:33 pluto kernel:   1 base 000080000000 mask FFFFC0000000 write-back
Nov 08 16:35:33 pluto kernel:   2 base 0000C0000000 mask FFFFF0000000 write-back
Nov 08 16:35:33 pluto kernel:   3 base 0000CFF00000 mask FFFFFFF00000 uncachable
Nov 08 16:35:33 pluto kernel:   4 base 000100000000 mask FFFF80000000 write-back
Nov 08 16:35:33 pluto kernel:   5 base 000180000000 mask FFFFE0000000 write-back
Nov 08 16:35:33 pluto kernel:   6 base 0001A0000000 mask FFFFF0000000 write-back
Nov 08 16:35:33 pluto kernel:   7 disabled
Nov 08 16:35:33 pluto kernel: TOM2: 00000001b0000000 aka 6912M
Nov 08 16:35:33 pluto kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 08 16:35:33 pluto kernel: e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
Nov 08 16:35:33 pluto kernel: e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
Nov 08 16:35:33 pluto kernel: found SMP MP-table at [mem 0x000f4470-0x000f447f] mapped at [ffff8800000f4470]
Nov 08 16:35:33 pluto kernel: Scanning 1 areas for low memory corruption
Nov 08 16:35:33 pluto kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Nov 08 16:35:33 pluto kernel: Using GB pages for direct mapping
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x00000000-0x000fffff] page 4k
Nov 08 16:35:33 pluto kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
Nov 08 16:35:33 pluto kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Nov 08 16:35:33 pluto kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x1afe00000-0x1afffffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x1afe00000-0x1afffffff] page 2M
Nov 08 16:35:33 pluto kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x1ac000000-0x1afdfffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x1ac000000-0x1afdfffff] page 2M
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x180000000-0x1abffffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x180000000-0x1abffffff] page 2M
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x00100000-0xcfedffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x00100000-0x001fffff] page 4k
Nov 08 16:35:33 pluto kernel:  [mem 0x00200000-0x3fffffff] page 2M
Nov 08 16:35:33 pluto kernel:  [mem 0x40000000-0xbfffffff] page 1G
Nov 08 16:35:33 pluto kernel:  [mem 0xc0000000-0xcfdfffff] page 2M
Nov 08 16:35:33 pluto kernel:  [mem 0xcfe00000-0xcfedffff] page 4k
Nov 08 16:35:33 pluto kernel: init_memory_mapping: [mem 0x100000000-0x17fffffff]
Nov 08 16:35:33 pluto kernel:  [mem 0x100000000-0x17fffffff] page 1G
Nov 08 16:35:33 pluto kernel: RAMDISK: [mem 0x7fcb4000-0x7fffffff]
Nov 08 16:35:33 pluto kernel: ACPI: Early table checksum verification disabled
Nov 08 16:35:33 pluto kernel: ACPI: RSDP 0x00000000000F5E80 000014 (v00 GBT   )
Nov 08 16:35:33 pluto kernel: ACPI: RSDT 0x00000000CFEE3000 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Nov 08 16:35:33 pluto kernel: ACPI: FACP 0x00000000CFEE3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Nov 08 16:35:33 pluto kernel: ACPI: DSDT 0x00000000CFEE30C0 0072BC (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
Nov 08 16:35:33 pluto kernel: ACPI: FACS 0x00000000CFEE0000 000040
Nov 08 16:35:33 pluto kernel: ACPI: SSDT 0x00000000CFEEA440 0011C6 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
Nov 08 16:35:33 pluto kernel: ACPI: HPET 0x00000000CFEEB640 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
Nov 08 16:35:33 pluto kernel: ACPI: MCFG 0x00000000CFEEB680 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Nov 08 16:35:33 pluto kernel: ACPI: TAMG 0x00000000CFEEB6C0 00038A (v01 GBT    GBT   B0 5455312E BG?? 53450101)
Nov 08 16:35:33 pluto kernel: ACPI: APIC 0x00000000CFEEA380 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
Nov 08 16:35:33 pluto kernel: ACPI: Local APIC address 0xfee00000
Nov 08 16:35:33 pluto kernel: Scanning NUMA topology in Northbridge 24
Nov 08 16:35:33 pluto kernel: No NUMA configuration found
Nov 08 16:35:33 pluto kernel: Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
Nov 08 16:35:33 pluto kernel: Initmem setup node 0 [mem 0x00000000-0x1afffffff]
Nov 08 16:35:33 pluto kernel:   NODE_DATA [mem 0x1afffa000-0x1afffdfff]
Nov 08 16:35:33 pluto kernel:  [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9600000-ffff8801af5fffff] on node 0
Nov 08 16:35:33 pluto kernel: Zone ranges:
Nov 08 16:35:33 pluto kernel:   DMA      [mem 0x00001000-0x00ffffff]
Nov 08 16:35:33 pluto kernel:   DMA32    [mem 0x01000000-0xffffffff]
Nov 08 16:35:33 pluto kernel:   Normal   [mem 0x100000000-0x1afffffff]
Nov 08 16:35:33 pluto kernel: Movable zone start for each node
Nov 08 16:35:33 pluto kernel: Early memory node ranges
Nov 08 16:35:33 pluto kernel:   node   0: [mem 0x00001000-0x0009efff]
Nov 08 16:35:33 pluto kernel:   node   0: [mem 0x00100000-0xcfedffff]
Nov 08 16:35:33 pluto kernel:   node   0: [mem 0x100000000-0x1afffffff]
Nov 08 16:35:33 pluto kernel: On node 0 totalpages: 1572478
Nov 08 16:35:33 pluto kernel:   DMA zone: 64 pages used for memmap
Nov 08 16:35:33 pluto kernel:   DMA zone: 21 pages reserved
Nov 08 16:35:33 pluto kernel:   DMA zone: 3998 pages, LIFO batch:0
Nov 08 16:35:33 pluto kernel:   DMA32 zone: 13244 pages used for memmap
Nov 08 16:35:33 pluto kernel:   DMA32 zone: 847584 pages, LIFO batch:31
Nov 08 16:35:33 pluto kernel:   Normal zone: 11264 pages used for memmap
Nov 08 16:35:33 pluto kernel:   Normal zone: 720896 pages, LIFO batch:31
Nov 08 16:35:33 pluto kernel: ACPI: PM-Timer IO Port: 0x4008
Nov 08 16:35:33 pluto kernel: ACPI: Local APIC address 0xfee00000
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
Nov 08 16:35:33 pluto kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 08 16:35:33 pluto kernel: IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Nov 08 16:35:33 pluto kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 08 16:35:33 pluto kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Nov 08 16:35:33 pluto kernel: ACPI: IRQ0 used by override.
Nov 08 16:35:33 pluto kernel: ACPI: IRQ9 used by override.
Nov 08 16:35:33 pluto kernel: Using ACPI (MADT) for SMP configuration information
Nov 08 16:35:33 pluto kernel: ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Nov 08 16:35:33 pluto kernel: smpboot: Allowing 8 CPUs, 2 hotplug CPUs
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
Nov 08 16:35:33 pluto kernel: e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Nov 08 16:35:33 pluto kernel: Booting paravirtualized kernel on bare hardware
Nov 08 16:35:33 pluto kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
Nov 08 16:35:33 pluto kernel: PERCPU: Embedded 29 pages/cpu @ffff8801afc00000 s86848 r8192 d23744 u262144
Nov 08 16:35:33 pluto kernel: pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
Nov 08 16:35:33 pluto kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Nov 08 16:35:33 pluto kernel: Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1547885
Nov 08 16:35:33 pluto kernel: Policy zone: Normal
Nov 08 16:35:33 pluto kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 rw vga=773 initrd=../initramfs-linux.img
Nov 08 16:35:33 pluto kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 08 16:35:33 pluto kernel: AGP: Checking aperture...
Nov 08 16:35:33 pluto kernel: AGP: No AGP bridge found
Nov 08 16:35:33 pluto kernel: AGP: Node 0: aperture [bus addr 0x68a8000000-0x68a9ffffff] (32MB)
Nov 08 16:35:33 pluto kernel: Aperture beyond 4GB. Ignoring.
Nov 08 16:35:33 pluto kernel: AGP: Your BIOS doesn't leave a aperture memory hole
Nov 08 16:35:33 pluto kernel: AGP: Please enable the IOMMU option in the BIOS setup
Nov 08 16:35:33 pluto kernel: AGP: This costs you 64MB of RAM
Nov 08 16:35:33 pluto kernel: AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
Nov 08 16:35:33 pluto kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Nov 08 16:35:33 pluto kernel: Memory: 6043884K/6289912K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 246028K reserved)
Nov 08 16:35:33 pluto kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Nov 08 16:35:33 pluto kernel: Preemptible hierarchical RCU implementation.
Nov 08 16:35:33 pluto kernel:         RCU dyntick-idle grace-period acceleration is enabled.
Nov 08 16:35:33 pluto kernel:         Dump stacks of tasks blocking RCU-preempt GP.
Nov 08 16:35:33 pluto kernel:         RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Nov 08 16:35:33 pluto kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
Nov 08 16:35:33 pluto kernel: NR_IRQS:8448 nr_irqs:488 0
Nov 08 16:35:33 pluto kernel: Console: colour dummy device 80x25
Nov 08 16:35:33 pluto kernel: console [tty0] enabled
Nov 08 16:35:33 pluto kernel: allocated 25165824 bytes of page_cgroup
Nov 08 16:35:33 pluto kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 08 16:35:33 pluto kernel: hpet clockevent registered
Nov 08 16:35:33 pluto kernel: tsc: Fast TSC calibration using PIT
Nov 08 16:35:33 pluto kernel: tsc: Detected 2812.328 MHz processor
Nov 08 16:35:33 pluto kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.01 BogoMIPS (lpj=9374426)
Nov 08 16:35:33 pluto kernel: pid_max: default: 32768 minimum: 301
Nov 08 16:35:33 pluto kernel: ACPI: Core revision 20140724
Nov 08 16:35:33 pluto kernel: ACPI: All ACPI Tables successfully acquired
Nov 08 16:35:33 pluto kernel: Security Framework initialized
Nov 08 16:35:33 pluto kernel: Yama: becoming mindful.
Nov 08 16:35:33 pluto kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Nov 08 16:35:33 pluto kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Nov 08 16:35:33 pluto kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Nov 08 16:35:33 pluto kernel: Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys memory
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys devices
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys freezer
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys net_cls
Nov 08 16:35:33 pluto kernel: Initializing cgroup subsys blkio
Nov 08 16:35:33 pluto kernel: CPU: Physical Processor ID: 0
Nov 08 16:35:33 pluto kernel: CPU: Processor Core ID: 0
Nov 08 16:35:33 pluto kernel: mce: CPU supports 6 MCE banks
Nov 08 16:35:33 pluto kernel: LVT offset 0 assigned for vector 0xf9
Nov 08 16:35:33 pluto kernel: process: using AMD E400 aware idle routine
Nov 08 16:35:33 pluto kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
                              Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Nov 08 16:35:33 pluto kernel: Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
Nov 08 16:35:33 pluto kernel: ftrace: allocating 20675 entries in 81 pages
Nov 08 16:35:33 pluto kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 08 16:35:33 pluto kernel: smpboot: CPU0: AMD Phenom(tm) II X6 1055T Processor (fam: 10, model: 0a, stepping: 00)
Nov 08 16:35:33 pluto kernel: Performance Events: AMD PMU driver.
Nov 08 16:35:33 pluto kernel: ... version:                0
Nov 08 16:35:33 pluto kernel: ... bit width:              48
Nov 08 16:35:33 pluto kernel: ... generic registers:      4
Nov 08 16:35:33 pluto kernel: ... value mask:             0000ffffffffffff
Nov 08 16:35:33 pluto kernel: ... max period:             00007fffffffffff
Nov 08 16:35:33 pluto kernel: ... fixed-purpose events:   0
Nov 08 16:35:33 pluto kernel: ... event mask:             000000000000000f
Nov 08 16:35:33 pluto kernel: process: System has AMD C1E enabled
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU0
Nov 08 16:35:33 pluto kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 08 16:35:33 pluto kernel: x86: Booting SMP configuration:
Nov 08 16:35:33 pluto kernel: .... node  #0, CPUs:      #1
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU1
Nov 08 16:35:33 pluto kernel:  #2
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU2
Nov 08 16:35:33 pluto kernel:  #3
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU3
Nov 08 16:35:33 pluto kernel:  #4
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU4
Nov 08 16:35:33 pluto kernel:  #5
Nov 08 16:35:33 pluto kernel: x86: Booted up 1 node, 6 CPUs
Nov 08 16:35:33 pluto kernel: smpboot: Total of 6 processors activated (33761.09 BogoMIPS)
Nov 08 16:35:33 pluto kernel: process: Switch to broadcast mode on CPU5
Nov 08 16:35:33 pluto kernel: devtmpfs: initialized
Nov 08 16:35:33 pluto kernel: PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
Nov 08 16:35:33 pluto kernel: pinctrl core: initialized pinctrl subsystem
Nov 08 16:35:33 pluto kernel: RTC time: 15:35:26, date: 11/08/14
Nov 08 16:35:33 pluto kernel: NET: Registered protocol family 16
Nov 08 16:35:33 pluto kernel: cpuidle: using governor ladder
Nov 08 16:35:33 pluto kernel: cpuidle: using governor menu
Nov 08 16:35:33 pluto kernel: node 0 link 0: io port [a000, ffff]
Nov 08 16:35:33 pluto kernel: TOM: 00000000d0000000 aka 3328M
Nov 08 16:35:33 pluto kernel: Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
Nov 08 16:35:33 pluto kernel: node 0 link 0: mmio [a0000, bffff]
Nov 08 16:35:33 pluto kernel: node 0 link 0: mmio [d0000000, dfffffff]
Nov 08 16:35:33 pluto kernel: node 0 link 0: mmio [f0000000, fe02ffff]
Nov 08 16:35:33 pluto kernel: node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
Nov 08 16:35:33 pluto kernel: TOM2: 00000001b0000000 aka 6912M
Nov 08 16:35:33 pluto kernel: bus: [bus 00-05] on node 0 link 0
Nov 08 16:35:33 pluto kernel: bus: 00 [io  0x0000-0xffff]
Nov 08 16:35:33 pluto kernel: bus: 00 [mem 0x000a0000-0x000bffff]
Nov 08 16:35:33 pluto kernel: bus: 00 [mem 0xd0000000-0xdfffffff]
Nov 08 16:35:33 pluto kernel: bus: 00 [mem 0xe0600000-0xffffffff]
Nov 08 16:35:33 pluto kernel: bus: 00 [mem 0xe0100000-0xe05fffff]
Nov 08 16:35:33 pluto kernel: bus: 00 [mem 0x1b0000000-0xfcffffffff]
Nov 08 16:35:33 pluto kernel: ACPI: bus type PCI registered
Nov 08 16:35:33 pluto kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 08 16:35:33 pluto kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov 08 16:35:33 pluto kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Nov 08 16:35:33 pluto kernel: PCI: Using configuration type 1 for base access
Nov 08 16:35:33 pluto kernel: ACPI: Added _OSI(Module Device)
Nov 08 16:35:33 pluto kernel: ACPI: Added _OSI(Processor Device)
Nov 08 16:35:33 pluto kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 08 16:35:33 pluto kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 08 16:35:33 pluto kernel: ACPI: Interpreter enabled
Nov 08 16:35:33 pluto kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
Nov 08 16:35:33 pluto kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
Nov 08 16:35:33 pluto kernel: ACPI: (supports S0 S3 S4 S5)
Nov 08 16:35:33 pluto kernel: ACPI: Using IOAPIC for interrupt routing
Nov 08 16:35:33 pluto kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 08 16:35:33 pluto kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 08 16:35:33 pluto kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Nov 08 16:35:33 pluto kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Nov 08 16:35:33 pluto kernel: PCI host bridge to bus 0000:00
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:00:00.0: reg 0x1c: [mem 0xe0000000-0xffffffff 64bit]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0: [1002:597e] type 01 class 0x060400
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:11.0: set SATA to AHCI mode
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.2: supports D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Nov 08 16:35:33 pluto kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.1: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.2: supports D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Nov 08 16:35:33 pluto kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
Nov 08 16:35:33 pluto kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf8000000-0xf9ffffff]
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xdc000000-0xdfffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: reg 0x24: [io  0xcf00-0xcf7f]
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:02:00.0: [1131:7162] type 00 class 0x048000
Nov 08 16:35:33 pluto kernel: pci 0000:02:00.0: reg 0x10: [mem 0xfdc00000-0xfdcfffff 64bit]
Nov 08 16:35:33 pluto kernel: pci 0000:02:00.0: supports D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0: PCI bridge to [bus 02]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
Nov 08 16:35:33 pluto kernel: pci 0000:03:00.0: reg 0x10: [mem 0xfd8fe000-0xfd8fffff 64bit]
Nov 08 16:35:33 pluto kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0: PCI bridge to [bus 03]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: reg 0x10: [io  0xde00-0xdeff]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: reg 0x20: [mem 0xfddf8000-0xfddfbfff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: supports D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0: PCI bridge to [bus 04]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:05:0e.0: [104c:8024] type 00 class 0x0c0010
Nov 08 16:35:33 pluto kernel: pci 0000:05:0e.0: reg 0x10: [mem 0xfdaff000-0xfdaff7ff]
Nov 08 16:35:33 pluto kernel: pci 0000:05:0e.0: reg 0x14: [mem 0xfdaf8000-0xfdafbfff]
Nov 08 16:35:33 pluto kernel: pci 0000:05:0e.0: supports D1 D2
Nov 08 16:35:33 pluto kernel: pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: on NUMA node 0
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
Nov 08 16:35:33 pluto kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
Nov 08 16:35:33 pluto kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 08 16:35:33 pluto kernel: vgaarb: loaded
Nov 08 16:35:33 pluto kernel: vgaarb: bridge control possible 0000:01:00.0
Nov 08 16:35:33 pluto kernel: PCI: Using ACPI for IRQ routing
Nov 08 16:35:33 pluto kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 08 16:35:33 pluto kernel: pci 0000:00:00.0: can't claim BAR 3 [mem 0xe0000000-0xffffffff 64bit]: no compatible bridge window
Nov 08 16:35:33 pluto kernel: e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
Nov 08 16:35:33 pluto kernel: e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
Nov 08 16:35:33 pluto kernel: NetLabel: Initializing
Nov 08 16:35:33 pluto kernel: NetLabel:  domain hash size = 128
Nov 08 16:35:33 pluto kernel: NetLabel:  protocols = UNLABELED CIPSOv4
Nov 08 16:35:33 pluto kernel: NetLabel:  unlabeled traffic allowed by default
Nov 08 16:35:33 pluto kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Nov 08 16:35:33 pluto kernel: hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Nov 08 16:35:33 pluto kernel: Switched to clocksource hpet
Nov 08 16:35:33 pluto kernel: pnp: PnP ACPI init
Nov 08 16:35:33 pluto kernel: system 00:00: [io  0x04d0-0x04d1] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:00: [io  0x0220-0x0225] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:00: [io  0x0290-0x0294] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 08 16:35:33 pluto kernel: pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
Nov 08 16:35:33 pluto kernel: pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x4100-0x411f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0228-0x022f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x040b] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x04d6] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0c00-0x0c01] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0c14] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0c50-0x0c52] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0c6c-0x0c6d] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0c6f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0cd0-0x0cd1] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0cd2-0x0cd3] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0cd4-0x0cdf] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x4000-0x40fe] could not be reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x4210-0x4217] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0b00-0x0b0f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0b10-0x0b1f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [io  0x0b20-0x0b3f] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 08 16:35:33 pluto kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 08 16:35:33 pluto kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
Nov 08 16:35:33 pluto kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
Nov 08 16:35:33 pluto kernel: system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x000d1000-0x000d3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: pnp 00:06: disabling [mem 0x00100000-0xcfedffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xcfee0000-0xcfeeffff] could not be reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xcfef0000-0xcfefffff] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
Nov 08 16:35:33 pluto kernel: system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
Nov 08 16:35:33 pluto kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 08 16:35:33 pluto kernel: pnp: PnP ACPI: found 7 devices
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0: PCI bridge to [bus 02]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [io  0xb000-0xbfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:07.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0: PCI bridge to [bus 03]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [mem 0xfd800000-0xfd8fffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:09.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0: PCI bridge to [bus 04]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:0a.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4: PCI bridge to [bus 05]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [io  0xa000-0xafff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0xfda00000-0xfdafffff]
Nov 08 16:35:33 pluto kernel: pci 0000:00:14.4:   bridge window [mem 0xfd900000-0xfd9fffff pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:03: resource 1 [mem 0xfd800000-0xfd8fffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 0 [io  0xa000-0xafff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff pref]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
Nov 08 16:35:33 pluto kernel: pci_bus 0000:05: resource 8 [mem 0xd0000000-0xfebfffff]
Nov 08 16:35:33 pluto kernel: NET: Registered protocol family 2
Nov 08 16:35:33 pluto kernel: TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Nov 08 16:35:33 pluto kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Nov 08 16:35:33 pluto kernel: TCP: Hash tables configured (established 65536 bind 65536)
Nov 08 16:35:33 pluto kernel: TCP: reno registered
Nov 08 16:35:33 pluto kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
Nov 08 16:35:33 pluto kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
Nov 08 16:35:33 pluto kernel: NET: Registered protocol family 1
Nov 08 16:35:33 pluto kernel: pci 0000:01:00.0: Video device with shadowed ROM
Nov 08 16:35:33 pluto kernel: PCI: CLS 64 bytes, default 64
Nov 08 16:35:33 pluto kernel: Unpacking initramfs...
Nov 08 16:35:33 pluto kernel: Freeing initrd memory: 3376K (ffff88007fcb4000 - ffff880080000000)
Nov 08 16:35:33 pluto kernel: PCI-DMA: Disabling AGP.
Nov 08 16:35:33 pluto kernel: PCI-DMA: aperture base @ c4000000 size 65536 KB
Nov 08 16:35:33 pluto kernel: PCI-DMA: using GART IOMMU.
Nov 08 16:35:33 pluto kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Nov 08 16:35:33 pluto kernel: microcode: CPU0: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: CPU1: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: CPU2: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: CPU3: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: CPU4: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: CPU5: patch_level=0x010000bf
Nov 08 16:35:33 pluto kernel: microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Nov 08 16:35:33 pluto kernel: LVT offset 1 assigned for vector 0x400
Nov 08 16:35:33 pluto kernel: IBS: LVT offset 1 assigned
Nov 08 16:35:33 pluto kernel: perf: AMD IBS detected (0x0000001f)
Nov 08 16:35:33 pluto kernel: Scanning for low memory corruption every 60 seconds
Nov 08 16:35:33 pluto kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
Nov 08 16:35:33 pluto kernel: Initialise system trusted keyring
Nov 08 16:35:33 pluto kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 08 16:35:33 pluto kernel: zpool: loaded
Nov 08 16:35:33 pluto kernel: zbud: loaded
Nov 08 16:35:33 pluto kernel: VFS: Disk quotas dquot_6.5.2
Nov 08 16:35:33 pluto kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 08 16:35:33 pluto kernel: msgmni has been set to 11939
Nov 08 16:35:33 pluto kernel: Key type big_key registered
Nov 08 16:35:33 pluto kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 08 16:35:33 pluto kernel: io scheduler noop registered
Nov 08 16:35:33 pluto kernel: io scheduler deadline registered
Nov 08 16:35:33 pluto kernel: io scheduler cfq registered (default)
Nov 08 16:35:33 pluto kernel: pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: pcieport 0000:00:09.0: irq 26 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: pcieport 0000:00:0a.0: irq 27 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 08 16:35:33 pluto kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 08 16:35:33 pluto kernel: vesafb: mode is 1024x768x8, linelength=1024, pages=3
Nov 08 16:35:33 pluto kernel: vesafb: scrolling: redraw
Nov 08 16:35:33 pluto kernel: vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Nov 08 16:35:33 pluto kernel: vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90010e80000, using 1536k, total 14336k
Nov 08 16:35:33 pluto kernel: Console: switching to colour frame buffer device 128x48
Nov 08 16:35:33 pluto kernel: fb0: VESA VGA frame buffer device
Nov 08 16:35:33 pluto kernel: GHES: HEST is not enabled!
Nov 08 16:35:33 pluto kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 08 16:35:33 pluto kernel: 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Nov 08 16:35:33 pluto kernel: Linux agpgart interface v0.103
Nov 08 16:35:33 pluto kernel: rtc_cmos 00:02: RTC can wake from S4
Nov 08 16:35:33 pluto kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Nov 08 16:35:33 pluto kernel: rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
Nov 08 16:35:33 pluto kernel: ledtrig-cpu: registered to indicate activity on CPUs
Nov 08 16:35:33 pluto kernel: TCP: cubic registered
Nov 08 16:35:33 pluto kernel: NET: Registered protocol family 10
Nov 08 16:35:33 pluto kernel: NET: Registered protocol family 17
Nov 08 16:35:33 pluto kernel: Loading compiled-in X.509 certificates
Nov 08 16:35:33 pluto kernel: registered taskstats version 1
Nov 08 16:35:33 pluto kernel:   Magic number: 6:252:588
Nov 08 16:35:33 pluto kernel: rtc_cmos 00:02: setting system clock to 2014-11-08 15:35:27 UTC (1415460927)
Nov 08 16:35:33 pluto kernel: PM: Hibernation image not present or could not be loaded.
Nov 08 16:35:33 pluto kernel: Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
Nov 08 16:35:33 pluto kernel: Write protecting the kernel read-only data: 8192k
Nov 08 16:35:33 pluto kernel: Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
Nov 08 16:35:33 pluto kernel: Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
Nov 08 16:35:33 pluto kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
Nov 08 16:35:33 pluto systemd-udevd[67]: starting version 216
Nov 08 16:35:33 pluto kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Nov 08 16:35:33 pluto kernel: SCSI subsystem initialized
Nov 08 16:35:33 pluto kernel: ACPI: bus type USB registered
Nov 08 16:35:33 pluto kernel: usbcore: registered new interface driver usbfs
Nov 08 16:35:33 pluto kernel: usbcore: registered new interface driver hub
Nov 08 16:35:33 pluto kernel: usbcore: registered new device driver usb
Nov 08 16:35:33 pluto kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 08 16:35:33 pluto kernel: ehci-pci: EHCI PCI platform driver
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
Nov 08 16:35:33 pluto kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: debug port 1
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
Nov 08 16:35:33 pluto kernel: ohci-pci: OHCI PCI platform driver
Nov 08 16:35:33 pluto kernel: libata version 3.00 loaded.
Nov 08 16:35:33 pluto kernel: i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
Nov 08 16:35:33 pluto kernel: i8042: If AUX port is really absent please use the 'i8042.noaux' option
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Nov 08 16:35:33 pluto kernel: hub 1-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 1-0:1.0: 6 ports detected
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 28 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 29 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 30 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 31 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 32 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 33 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: irq 34 for MSI/MSI-X
Nov 08 16:35:33 pluto kernel: hub 2-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 2-0:1.0: 2 ports detected
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: xHCI Host Controller
Nov 08 16:35:33 pluto kernel: xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: debug port 1
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
Nov 08 16:35:33 pluto kernel: hub 3-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 3-0:1.0: 2 ports detected
Nov 08 16:35:33 pluto kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Nov 08 16:35:33 pluto kernel: hub 4-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 4-0:1.0: 6 ports detected
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
Nov 08 16:35:33 pluto kernel: firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
Nov 08 16:35:33 pluto kernel: hub 5-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 5-0:1.0: 3 ports detected
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.1: OHCI PCI host controller
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 6
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
Nov 08 16:35:33 pluto kernel: hub 6-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 6-0:1.0: 3 ports detected
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
Nov 08 16:35:33 pluto kernel: hub 7-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 7-0:1.0: 3 ports detected
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.1: OHCI PCI host controller
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 8
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
Nov 08 16:35:33 pluto kernel: hub 8-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 8-0:1.0: 3 ports detected
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
Nov 08 16:35:33 pluto kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
Nov 08 16:35:33 pluto kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 08 16:35:33 pluto kernel: hub 9-0:1.0: USB hub found
Nov 08 16:35:33 pluto kernel: hub 9-0:1.0: 2 ports detected
Nov 08 16:35:33 pluto kernel: scsi host0: pata_atiixp
Nov 08 16:35:33 pluto kernel: scsi host1: pata_atiixp
Nov 08 16:35:33 pluto kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
Nov 08 16:35:33 pluto kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
Nov 08 16:35:33 pluto kernel: ahci 0000:00:11.0: version 3.0
Nov 08 16:35:33 pluto kernel: ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Nov 08 16:35:33 pluto kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
Nov 08 16:35:33 pluto kernel: scsi host2: ahci
Nov 08 16:35:33 pluto kernel: scsi host3: ahci
Nov 08 16:35:33 pluto kernel: scsi host4: ahci
Nov 08 16:35:33 pluto kernel: scsi host5: ahci
Nov 08 16:35:33 pluto kernel: ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
Nov 08 16:35:33 pluto kernel: ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
Nov 08 16:35:33 pluto kernel: ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
Nov 08 16:35:33 pluto kernel: ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
Nov 08 16:35:33 pluto kernel: ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
Nov 08 16:35:33 pluto kernel: ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 08 16:35:33 pluto kernel: ata2.00: configured for UDMA/100
Nov 08 16:35:33 pluto kernel: scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72101 A3EA PQ: 0 ANSI: 5
Nov 08 16:35:33 pluto kernel: firewire_core 0000:05:0e.0: created device fw0: GUID 003b70dd006cf049, S400
Nov 08 16:35:33 pluto kernel: ata6: SATA link down (SStatus 0 SControl 300)
Nov 08 16:35:33 pluto kernel: ata5: SATA link down (SStatus 0 SControl 300)
Nov 08 16:35:33 pluto kernel: ata4: SATA link down (SStatus 0 SControl 300)
Nov 08 16:35:33 pluto kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 08 16:35:33 pluto kernel: ata3.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100
Nov 08 16:35:33 pluto kernel: ata3.00: configured for UDMA/100
Nov 08 16:35:33 pluto kernel: scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7240S  1.03 PQ: 0 ANSI: 5
Nov 08 16:35:33 pluto kernel: sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 08 16:35:33 pluto kernel: sd 1:0:0:0: [sda] Write Protect is off
Nov 08 16:35:33 pluto kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 08 16:35:33 pluto kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 08 16:35:33 pluto kernel: sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 08 16:35:33 pluto kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 08 16:35:33 pluto kernel: sr 2:0:0:0: Attached scsi CD-ROM sr0
Nov 08 16:35:33 pluto kernel:  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
Nov 08 16:35:33 pluto kernel: sd 1:0:0:0: [sda] Attached SCSI disk
Nov 08 16:35:33 pluto kernel: tsc: Refined TSC clocksource calibration: 2812.440 MHz
Nov 08 16:35:33 pluto kernel: usb 6-2: new full-speed USB device number 2 using ohci-pci
Nov 08 16:35:33 pluto kernel: hidraw: raw HID events driver (C) Jiri Kosina
Nov 08 16:35:33 pluto kernel: usbcore: registered new interface driver usbhid
Nov 08 16:35:33 pluto kernel: usbhid: USB HID core driver
Nov 08 16:35:33 pluto kernel: logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
Nov 08 16:35:33 pluto kernel: input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:12.1/usb6/6-2/6-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input1
Nov 08 16:35:33 pluto kernel: logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:12.1-2:1
Nov 08 16:35:33 pluto kernel: usb 6-3: new full-speed USB device number 3 using ohci-pci
Nov 08 16:35:33 pluto kernel: Switched to clocksource tsc
Nov 08 16:35:33 pluto kernel: usb 5-1: new full-speed USB device number 2 using ohci-pci
Nov 08 16:35:33 pluto kernel: usb 5-2: new low-speed USB device number 3 using ohci-pci
Nov 08 16:35:33 pluto kernel: floppy0: no floppy controllers found
Nov 08 16:35:33 pluto kernel: input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:04D9:1603.0006/input/input2
Nov 08 16:35:33 pluto kernel: hid-generic 0003:04D9:1603.0006: input,hidraw2: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:12.0-2/input0
Nov 08 16:35:33 pluto kernel: input:   USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.1/0003:04D9:1603.0007/input/input3
Nov 08 16:35:33 pluto kernel: hid-generic 0003:04D9:1603.0007: input,hidraw3: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:12.0-2/input1
Nov 08 16:35:33 pluto kernel: EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Nov 08 16:35:33 pluto kernel: random: nonblocking pool is initialized
Nov 08 16:35:33 pluto systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
Nov 08 16:35:33 pluto systemd[1]: Detected architecture 'x86-64'.
Nov 08 16:35:33 pluto systemd[1]: Set hostname to <pluto>.
Nov 08 16:35:33 pluto systemd[1]: Configuration file /etc/systemd/system/netctl@wlan0\x2dVSLI.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
Nov 08 16:35:33 pluto systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
Nov 08 16:35:33 pluto systemd[1]: Cannot add dependency job for unit tlp.service, ignoring: Unit tlp.service failed to load: No such file or directory.
Nov 08 16:35:33 pluto systemd[1]: Cannot add dependency job for unit cups.path, ignoring: Unit cups.path failed to load: No such file or directory.
Nov 08 16:35:33 pluto systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
Nov 08 16:35:33 pluto systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
Nov 08 16:35:33 pluto systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Nov 08 16:35:33 pluto systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Nov 08 16:35:33 pluto systemd[1]: Starting Remote File Systems.
Nov 08 16:35:33 pluto systemd[1]: Reached target Remote File Systems.
Nov 08 16:35:33 pluto systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
Nov 08 16:35:33 pluto systemd[1]: Starting Encrypted Volumes.
Nov 08 16:35:33 pluto systemd[1]: Reached target Encrypted Volumes.
Nov 08 16:35:33 pluto systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Nov 08 16:35:33 pluto systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 08 16:35:33 pluto systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Nov 08 16:35:33 pluto systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 08 16:35:33 pluto systemd[1]: Starting Paths.
Nov 08 16:35:33 pluto systemd[1]: Reached target Paths.
Nov 08 16:35:33 pluto systemd[1]: Expecting device dev-sda5.device...
Nov 08 16:35:33 pluto systemd[1]: Expecting device dev-sda7.device...
Nov 08 16:35:33 pluto systemd[1]: Starting Root Slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice Root Slice.
Nov 08 16:35:33 pluto systemd[1]: Starting Delayed Shutdown Socket.
Nov 08 16:35:33 pluto systemd[1]: Listening on Delayed Shutdown Socket.
Nov 08 16:35:33 pluto systemd[1]: Starting Device-mapper event daemon FIFOs.
Nov 08 16:35:33 pluto systemd[1]: Listening on Device-mapper event daemon FIFOs.
Nov 08 16:35:33 pluto systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Nov 08 16:35:33 pluto systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Nov 08 16:35:33 pluto systemd[1]: Starting Journal Socket (/dev/log).
Nov 08 16:35:33 pluto systemd[1]: Listening on Journal Socket (/dev/log).
Nov 08 16:35:33 pluto systemd[1]: Starting LVM2 metadata daemon socket.
Nov 08 16:35:33 pluto systemd[1]: Listening on LVM2 metadata daemon socket.
Nov 08 16:35:33 pluto systemd[1]: Starting udev Kernel Socket.
Nov 08 16:35:33 pluto systemd[1]: Listening on udev Kernel Socket.
Nov 08 16:35:33 pluto systemd[1]: Starting udev Control Socket.
Nov 08 16:35:33 pluto systemd[1]: Listening on udev Control Socket.
Nov 08 16:35:33 pluto systemd[1]: Starting User and Session Slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice User and Session Slice.
Nov 08 16:35:33 pluto systemd[1]: Starting Journal Socket.
Nov 08 16:35:33 pluto systemd[1]: Listening on Journal Socket.
Nov 08 16:35:33 pluto systemd[1]: Starting System Slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice System Slice.
Nov 08 16:35:33 pluto systemd[1]: Started File System Check on Root Device.
Nov 08 16:35:33 pluto systemd[1]: Starting system-systemd\x2dfsck.slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice system-systemd\x2dfsck.slice.
Nov 08 16:35:33 pluto systemd[1]: Starting Remount Root and Kernel File Systems...
Nov 08 16:35:33 pluto systemd[1]: Mounting Debug File System...
Nov 08 16:35:33 pluto systemd[1]: Starting Set Up Additional Binary Formats...
Nov 08 16:35:33 pluto systemd[1]: Mounting POSIX Message Queue File System...
Nov 08 16:35:33 pluto systemd[1]: Starting Setup Virtual Console...
Nov 08 16:35:33 pluto systemd[1]: Starting Create list of required static device nodes for the current kernel...
Nov 08 16:35:33 pluto systemd[1]: Mounting Huge Pages File System...
Nov 08 16:35:33 pluto systemd[1]: Starting Load Kernel Modules...
Nov 08 16:35:33 pluto systemd[1]: Starting udev Coldplug all Devices...
Nov 08 16:35:33 pluto systemd[1]: Starting system-netctl.slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice system-netctl.slice.
Nov 08 16:35:33 pluto systemd[1]: Starting system-getty.slice.
Nov 08 16:35:33 pluto systemd[1]: Created slice system-getty.slice.
Nov 08 16:35:33 pluto systemd[1]: Starting Journal Service...
Nov 08 16:35:33 pluto systemd[1]: Started Journal Service.
Nov 08 16:35:33 pluto systemd-journal[162]: Journal started
Nov 08 16:35:33 pluto systemd[1]: Starting Slices.
Nov 08 16:35:33 pluto systemd[1]: Reached target Slices.
Nov 08 16:35:33 pluto systemd[1]: Mounting Temporary Directory...
Nov 08 16:35:33 pluto systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 155 (systemd-binfmt)
Nov 08 16:35:33 pluto systemd[1]: Mounting Arbitrary Executable File Formats File System...
Nov 08 16:35:33 pluto systemd[1]: Started Create list of required static device nodes for the current kernel.
Nov 08 16:35:33 pluto systemd-modules-load[160]: Inserted module 'aic94xx'
Nov 08 16:35:33 pluto kernel: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
Nov 08 16:35:33 pluto systemd-modules-load[160]: Inserted module 'smsmdtv'
Nov 08 16:35:33 pluto systemd[1]: Mounted Debug File System.
Nov 08 16:35:33 pluto kernel: EXT4-fs (sda6): re-mounted. Opts: data=ordered
Nov 08 16:35:33 pluto systemd[1]: Mounted Temporary Directory.
Nov 08 16:35:33 pluto systemd[1]: Mounted Arbitrary Executable File Formats File System.
Nov 08 16:35:33 pluto systemd[1]: Mounted Huge Pages File System.
Nov 08 16:35:33 pluto systemd[1]: Mounted POSIX Message Queue File System.
Nov 08 16:35:33 pluto systemd[1]: Started Remount Root and Kernel File Systems.
Nov 08 16:35:33 pluto systemd[1]: Started udev Coldplug all Devices.
Nov 08 16:35:33 pluto systemd[1]: Starting udev Wait for Complete Device Initialization...
Nov 08 16:35:33 pluto systemd-modules-load[160]: Inserted module 'vboxdrv'
Nov 08 16:35:33 pluto kernel: vboxdrv: Found 6 processor cores.
Nov 08 16:35:33 pluto kernel: vboxdrv: fAsync=0 offMin=0x354 offMax=0x1bdd
Nov 08 16:35:33 pluto kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Nov 08 16:35:33 pluto kernel: vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
Nov 08 16:35:33 pluto systemd[1]: Started Create System Users.
Nov 08 16:35:33 pluto systemd[1]: Starting Create Static Device Nodes in /dev...
Nov 08 16:35:33 pluto systemd[1]: Started Rebuild Dynamic Linker Cache.
Nov 08 16:35:33 pluto systemd[1]: Started First Boot Wizard.
Nov 08 16:35:33 pluto systemd[1]: Starting Load/Save Random Seed...
Nov 08 16:35:33 pluto systemd[1]: Started Rebuild Hardware Database.
Nov 08 16:35:33 pluto systemd[1]: Started Set Up Additional Binary Formats.
Nov 08 16:35:33 pluto systemd[1]: Started Load Kernel Modules.
Nov 08 16:35:33 pluto systemd[1]: Mounted FUSE Control File System.
Nov 08 16:35:33 pluto systemd[1]: Starting Apply Kernel Variables...
Nov 08 16:35:33 pluto systemd[1]: Mounting Configuration File System...
Nov 08 16:35:33 pluto systemd[1]: Mounted Configuration File System.
Nov 08 16:35:33 pluto systemd[1]: Started Apply Kernel Variables.
Nov 08 16:35:33 pluto systemd[1]: Started Load/Save Random Seed.
Nov 08 16:35:34 pluto systemd[1]: Started Create Static Device Nodes in /dev.
Nov 08 16:35:34 pluto systemd[1]: Starting udev Kernel Device Manager...
Nov 08 16:35:34 pluto systemd[1]: Starting Local File Systems (Pre).
Nov 08 16:35:34 pluto systemd[1]: Reached target Local File Systems (Pre).
Nov 08 16:35:34 pluto systemd-udevd[196]: starting version 216
Nov 08 16:35:34 pluto systemd[1]: Started udev Kernel Device Manager.
Nov 08 16:35:34 pluto systemd[1]: Started Setup Virtual Console.
Nov 08 16:35:34 pluto kernel: ACPI: processor limited to max C-state 1
Nov 08 16:35:34 pluto kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
Nov 08 16:35:34 pluto kernel: ACPI: Power Button [PWRB]
Nov 08 16:35:34 pluto kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Nov 08 16:35:34 pluto kernel: ACPI: Power Button [PWRF]
Nov 08 16:35:34 pluto kernel: acpi-cpufreq: overriding BIOS provided _PSD data
Nov 08 16:35:34 pluto kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 08 16:35:35 pluto kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Nov 08 16:35:35 pluto kernel: r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
Nov 08 16:35:35 pluto kernel: r8169 0000:04:00.0: irq 35 for MSI/MSI-X
Nov 08 16:35:35 pluto kernel: r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffc90000c62000, 6c:f0:49:7d:af:a8, XID 083000c0 IRQ 35
Nov 08 16:35:35 pluto kernel: r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Nov 08 16:35:35 pluto kernel: MCE: In-kernel MCE decoding enabled.
Nov 08 16:35:35 pluto kernel: EDAC MC: Ver: 3.0.0
Nov 08 16:35:35 pluto kernel: AMD64 EDAC driver v3.4.0
Nov 08 16:35:35 pluto kernel: EDAC amd64: DRAM ECC disabled.
Nov 08 16:35:35 pluto kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                               Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                               (Note that use of the override may cause unknown side effects.)
Nov 08 16:35:35 pluto kernel: ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140724/utaddress-258)
Nov 08 16:35:35 pluto kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Nov 08 16:35:35 pluto kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Nov 08 16:35:35 pluto kernel: sp5100_tco: PCI Revision ID: 0x3c
Nov 08 16:35:35 pluto kernel: sp5100_tco: failed to find MMIO address, giving up.
Nov 08 16:35:35 pluto kernel: wmi: Mapper loaded
Nov 08 16:35:35 pluto kernel: parport_pc 00:04: reported by Plug and Play ACPI
Nov 08 16:35:35 pluto kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Nov 08 16:35:35 pluto kernel: kvm: Nested Virtualization enabled
Nov 08 16:35:35 pluto kernel: kvm: Nested Paging enabled
Nov 08 16:35:35 pluto kernel: r8169 0000:04:00.0 enp4s0: renamed from eth0
Nov 08 16:35:35 pluto systemd-udevd[205]: renamed network interface eth0 to enp4s0
Nov 08 16:35:35 pluto kernel: ppdev: user-space parallel port driver
Nov 08 16:35:35 pluto kernel: [drm] Initialized drm 1.1.0 20060810
Nov 08 16:35:36 pluto mtp-probe[369]: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb5/5-2"
Nov 08 16:35:36 pluto mtp-probe[368]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1"
Nov 08 16:35:36 pluto mtp-probe[366]: checking bus 6, device 3: "/sys/devices/pci0000:00/0000:00:12.1/usb6/6-3"
Nov 08 16:35:36 pluto mtp-probe[369]: bus: 5, device: 3 was not an MTP device
Nov 08 16:35:36 pluto mtp-probe[368]: bus: 5, device: 2 was not an MTP device
Nov 08 16:35:36 pluto mtp-probe[365]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:12.1/usb6/6-2"
Nov 08 16:35:36 pluto mtp-probe[365]: bus: 6, device: 2 was not an MTP device
Nov 08 16:35:36 pluto mtp-probe[366]: bus: 6, device: 3 was not an MTP device
Nov 08 16:35:36 pluto kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
Nov 08 16:35:36 pluto kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    mono: mono_out=0x0
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    dig-out=0x1e/0x0
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    inputs:
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:      Rear Mic=0x18
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:      Front Mic=0x19
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:      Line=0x1a
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:      CD=0x1c
Nov 08 16:35:36 pluto kernel: sound hdaudioC0D0:    dig-in=0x1f
Nov 08 16:35:36 pluto kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D0/input6
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
Nov 08 16:35:36 pluto kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
Nov 08 16:35:36 pluto kernel: nvidia: module license 'NVIDIA' taints kernel.
Nov 08 16:35:36 pluto kernel: Disabling lock debugging due to kernel taint
Nov 08 16:35:36 pluto kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
Nov 08 16:35:36 pluto kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
Nov 08 16:35:36 pluto kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module  343.22  Thu Sep 11 16:27:43 PDT 2014
Nov 08 16:35:36 pluto laptop-mode[827]: Laptop mode
Nov 08 16:35:36 pluto laptop-mode[900]: enabled, not active
Nov 08 16:35:36 pluto systemd[1]: Starting Sound Card.
Nov 08 16:35:36 pluto systemd[1]: Reached target Sound Card.
Nov 08 16:35:36 pluto kernel: input: Wacom Intuos4 4x6 as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input14
Nov 08 16:35:36 pluto kernel: input: Wacom Intuos4 4x6 Pad as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:056A:00B8.0005/input/input15
Nov 08 16:35:36 pluto kernel: mousedev: PS/2 mouse device common for all mice
Nov 08 16:35:36 pluto kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
Nov 08 16:35:36 pluto kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
Nov 08 16:35:36 pluto kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
Nov 08 16:35:36 pluto kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
Nov 08 16:35:36 pluto kernel: wacom 0003:056A:00B8.0005: hidraw4: USB HID v1.00 Mouse [Tablet PTK-440] on usb-0000:00:12.0-1/input0
Nov 08 16:35:36 pluto kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 08 16:35:37 pluto kernel: media: Linux media interface: v0.10
Nov 08 16:35:37 pluto kernel: Linux video capture interface: v2.00
Nov 08 16:35:37 pluto kernel: gspca_main: v2.14.0 registered
Nov 08 16:35:37 pluto kernel: gspca_main: sonixj-2.14.0 probing 045e:00f5
Nov 08 16:35:37 pluto kernel: input: sonixj as /devices/pci0000:00/0000:00:12.1/usb6/6-3/input/input20
Nov 08 16:35:37 pluto kernel: usbcore: registered new interface driver sonixj
Nov 08 16:35:37 pluto systemd[1]: Found device Hitachi_HDS721010CLA332 home.
Nov 08 16:35:37 pluto systemd[1]: Starting File System Check on /dev/sda7...
Nov 08 16:35:37 pluto systemd[1]: Found device Hitachi_HDS721010CLA332 swap.
Nov 08 16:35:37 pluto systemd[1]: Activating swap /dev/sda5...
Nov 08 16:35:37 pluto kernel: floppy0: no floppy controllers found
Nov 08 16:35:38 pluto laptop-mode[2140]: Laptop mode
Nov 08 16:35:38 pluto laptop-mode[2141]: enabled, not active
Nov 08 16:35:38 pluto kernel: usbcore: registered new interface driver snd-usb-audio
Nov 08 16:35:38 pluto systemd[1]: Started udev Wait for Complete Device Initialization.
Nov 08 16:35:38 pluto laptop-mode[2192]: Laptop mode
Nov 08 16:35:38 pluto laptop-mode[2193]: enabled, not active
Nov 08 16:35:38 pluto systemd-fsck[1999]: home: sauber, 159214/25206784 Dateien, 40563789/100803840 Blöcke
Nov 08 16:35:38 pluto kernel: Adding 5119996k swap on /dev/sda5.  Priority:-1 extents:1 across:5119996k FS
Nov 08 16:35:38 pluto systemd[1]: Activated swap /dev/sda5.
Nov 08 16:35:38 pluto systemd[1]: Starting Swap.
Nov 08 16:35:38 pluto systemd[1]: Reached target Swap.
Nov 08 16:35:38 pluto systemd[1]: Started File System Check on /dev/sda7.
Nov 08 16:35:38 pluto systemd[1]: Mounting /home...
Nov 08 16:35:38 pluto kernel: EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
Nov 08 16:35:38 pluto systemd[1]: Mounted /home.
Nov 08 16:35:38 pluto systemd[1]: Starting Local File Systems.
Nov 08 16:35:38 pluto systemd[1]: Reached target Local File Systems.
Nov 08 16:35:38 pluto systemd[1]: Starting Create Volatile Files and Directories...
Nov 08 16:35:38 pluto systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
Nov 08 16:35:38 pluto systemd[1]: Started Rebuild Journal Catalog.
Nov 08 16:35:38 pluto systemd[1]: Started Update is Completed.
Nov 08 16:35:38 pluto kernel: microcode: CPU0: new patch_level=0x010000dc
Nov 08 16:35:38 pluto kernel: microcode: CPU1: new patch_level=0x010000dc
Nov 08 16:35:38 pluto kernel: microcode: CPU2: new patch_level=0x010000dc
Nov 08 16:35:38 pluto kernel: microcode: CPU3: new patch_level=0x010000dc
Nov 08 16:35:38 pluto kernel: microcode: CPU4: new patch_level=0x010000dc
Nov 08 16:35:38 pluto kernel: microcode: CPU5: new patch_level=0x010000dc
Nov 08 16:35:38 pluto systemd[1]: Started Create Volatile Files and Directories.
Nov 08 16:35:38 pluto systemd[1]: Starting Update UTMP about System Boot/Shutdown...
Nov 08 16:35:38 pluto systemd-journal[162]: Permanent journal is using 3.9G (max allowed 4.0G, trying to leave 4.0G free of 25.2G available → current limit 4.0G).
Nov 08 16:35:39 pluto systemd-journal[162]: Time spent on flushing to /var is 644.739ms for 942 entries.
Nov 08 16:35:40 pluto kernel: r8169 0000:04:00.0: Refused to change power state, currently in D3
Nov 08 16:35:40 pluto kernel: cfg80211: Calling CRDA to update world regulatory domain
Nov 08 16:35:40 pluto kernel: cfg80211: World regulatory domain updated:
Nov 08 16:35:40 pluto kernel: cfg80211:  DFS Master region: unset
Nov 08 16:35:40 pluto kernel: cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Nov 08 16:35:40 pluto kernel: cfg80211:   (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
Nov 08 16:35:40 pluto kernel: cfg80211:   (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
Nov 08 16:35:40 pluto kernel: cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Nov 08 16:35:40 pluto kernel: cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Nov 08 16:35:40 pluto kernel: cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Nov 08 16:35:40 pluto kernel: cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Nov 08 16:35:40 pluto kernel: cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Nov 08 16:35:40 pluto kernel: cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Nov 08 16:35:38 pluto crond[2222]: (CRON) INFO (Syslog will be used instead of sendmail.)
Nov 08 16:35:38 pluto crond[2222]: (CRON) INFO (RANDOM_DELAY will be scaled with factor 17% if used.)
Nov 08 16:35:38 pluto crond[2222]: (freenet) ORPHAN (no passwd entry)
Nov 08 16:35:38 pluto crond[2222]: (CRON) INFO (running with inotify support)
Nov 08 16:35:39 pluto dhcpcd[2227]: version 6.6.0 starting
Nov 08 16:35:39 pluto avahi-daemon[2224]: Found user 'avahi' (UID 84) and group 'avahi' (GID 84).
Nov 08 16:35:39 pluto avahi-daemon[2224]: Successfully dropped root privileges.
Nov 08 16:35:39 pluto avahi-daemon[2224]: avahi-daemon 0.6.31 starting up.
Nov 08 16:35:39 pluto avahi-daemon[2224]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
Nov 08 16:35:39 pluto dhcpcd[2227]: enp4s0: adding address fe80::a26a:9ff9:675d:81d0
Nov 08 16:35:39 pluto dhcpcd[2227]: forked to background, child pid 2239
Nov 08 16:35:38 pluto systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Nov 08 16:35:38 pluto systemd[1]: Started Update UTMP about System Boot/Shutdown.
Nov 08 16:35:38 pluto systemd[1]: Starting System Initialization.
Nov 08 16:35:38 pluto systemd[1]: Reached target System Initialization.
Nov 08 16:35:38 pluto systemd[1]: Starting ACPID Listen Socket.
Nov 08 16:35:38 pluto systemd[1]: Listening on ACPID Listen Socket.
Nov 08 16:35:38 pluto systemd[1]: Starting Avahi mDNS/DNS-SD Stack Activation Socket.
Nov 08 16:35:38 pluto systemd[1]: Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Nov 08 16:35:38 pluto systemd[1]: Starting Daily rotation of log files.
Nov 08 16:35:38 pluto systemd[1]: Started Daily rotation of log files.
Nov 08 16:35:38 pluto systemd[1]: Starting Daily verification of password and group files.
Nov 08 16:35:40 pluto avahi-daemon[2224]: Successfully called chroot().
Nov 08 16:35:40 pluto avahi-daemon[2224]: Successfully dropped remaining capabilities.
Nov 08 16:35:40 pluto systemd[1]: Started WPA supplicant.
Nov 08 16:35:40 pluto systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Nov 08 16:35:40 pluto systemd[1]: Starting Login Service...
Nov 08 16:35:40 pluto avahi-daemon[2224]: Loading service file /services/sftp-ssh.service.
Nov 08 16:35:40 pluto systemd[1]: Starting Permit User Sessions...
Nov 08 16:35:40 pluto systemd[1]: Starting Network Manager...
Nov 08 16:35:40 pluto avahi-daemon[2224]: Loading service file /services/ssh.service.
Nov 08 16:35:40 pluto systemd[1]: Started Restore Sound Card State.
Nov 08 16:35:40 pluto systemd[1]: Started Brother scan-key-tool.
Nov 08 16:35:40 pluto systemd[1]: Started dhcpcd on all interfaces.
Nov 08 16:35:40 pluto systemd[1]: Started Permit User Sessions.
Nov 08 16:35:40 pluto systemd-logind[2271]: New seat seat0.
Nov 08 16:35:40 pluto systemd-logind[2271]: Watching system buttons on /dev/input/event4 (Power Button)
Nov 08 16:35:40 pluto systemd-logind[2271]: Watching system buttons on /dev/input/event3 (Power Button)
Nov 08 16:35:40 pluto avahi-daemon[2224]: Network interface enumeration completed.
Nov 08 16:35:40 pluto avahi-daemon[2224]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 08 16:35:40 pluto avahi-daemon[2224]: Server startup complete. Host name is pluto.local. Local service cookie is 553332272.
Nov 08 16:35:40 pluto avahi-daemon[2224]: Service "pluto" (/services/ssh.service) successfully established.
Nov 08 16:35:40 pluto avahi-daemon[2224]: Service "pluto" (/services/sftp-ssh.service) successfully established.
Nov 08 16:35:40 pluto systemd[1]: Started Login Service.
Nov 08 16:35:40 pluto systemd[1]: Starting Getty on tty1...
Nov 08 16:35:40 pluto systemd[1]: Started Getty on tty1.
Nov 08 16:35:40 pluto systemd[1]: Starting Login Prompts.
Nov 08 16:35:40 pluto systemd[1]: Reached target Login Prompts.
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0: Refused to change power state, currently in D3
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto NetworkManager[2273]: <info> NetworkManager (version 0.9.10.1) is starting...
Nov 08 16:35:41 pluto NetworkManager[2273]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
Nov 08 16:35:41 pluto NetworkManager[2273]: <info> WEXT support is enabled
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_phyar_cond == 1 (loop: 20, delay: 25).
Nov 08 16:35:41 pluto dhcpcd[2239]: enp4s0: waiting for carrier
Nov 08 16:35:41 pluto dhcpcd[2239]: enp4s0: carrier acquired
Nov 08 16:35:41 pluto avahi-daemon[2224]: Registering new address record for fe80::a26a:9ff9:675d:81d0 on enp4s0.*.
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
Nov 08 16:35:41 pluto kernel: r8169 0000:04:00.0 enp4s0: link up
Nov 08 16:35:42 pluto dhcpcd[2239]: DUID 00:01:00:01:1a:30:fa:2a:6c:f0:49:7d:af:a8
Nov 08 16:35:42 pluto dhcpcd[2239]: enp4s0: IAID 49:7d:af:a8
Nov 08 16:35:42 pluto dbus[2228]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 08 16:35:42 pluto systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
Nov 08 16:35:42 pluto systemd[1]: Starting Authorization Manager...
Nov 08 16:35:42 pluto polkitd[2284]: Started polkitd version 0.112
Nov 08 16:35:42 pluto polkitd[2284]: Loading rules from directory /etc/polkit-1/rules.d
Nov 08 16:35:42 pluto polkitd[2284]: Loading rules from directory /usr/share/polkit-1/rules.d
Nov 08 16:35:42 pluto polkitd[2284]: Finished loading, compiling and executing 3 rules
Nov 08 16:35:42 pluto dbus[2228]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 08 16:35:42 pluto polkitd[2284]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Nov 08 16:35:42 pluto systemd[1]: Started Authorization Manager.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> new connection /etc/NetworkManager/system-connections/Automatisches Ethernet
Nov 08 16:35:42 pluto NetworkManager[2273]: <warn>     error in connection /etc/NetworkManager/system-connections/VSLI 1: invalid or missing connection property 'NMSettingWirelessSecurity/802-11-wireless-security.wep-key0: Eigenschaft ist ungültig'
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> WiFi hardware radio set enabled
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> WWAN hardware radio set enabled
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
Nov 08 16:35:42 pluto dhcpcd[2239]: enp4s0: rebinding lease of 192.168.178.45
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> WiFi enabled by radio killswitch; enabled by state file
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> WWAN enabled by radio killswitch; enabled by state file
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> WiMAX enabled by radio killswitch; enabled by state file
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Networking is enabled by state file
Nov 08 16:35:42 pluto systemd[1]: Started Network Manager.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (lo): link connected
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (lo): carrier is ON
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
Nov 08 16:35:42 pluto dhcpcd[2239]: enp4s0: soliciting an IPv6 router
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): link connected
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): carrier is ON
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): new Ethernet device (driver: 'r8169' ifindex: 2)
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): exported as /org/freedesktop/NetworkManager/Devices/1
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): device state change: unmanaged -> unavailable (reason 'connection-assumed') [10 20 41]
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): device state change: unavailable -> disconnected (reason 'connection-assumed') [20 30 41]
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) starting connection 'enp4s0'
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 1 of 5 (Device Prepare) scheduled...
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 1 of 5 (Device Prepare) started...
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 2 of 5 (Device Configure) scheduled...
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 1 of 5 (Device Prepare) complete.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 2 of 5 (Device Configure) starting...
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): device state change: prepare -> config (reason 'none') [40 50 0]
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 2 of 5 (Device Configure) successful.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 3 of 5 (IP Configure Start) scheduled.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 2 of 5 (Device Configure) complete.
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 3 of 5 (IP Configure Start) started...
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> (enp4s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Nov 08 16:35:42 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 3 of 5 (IP Configure Start) complete.
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 5 of 5 (IPv6 Commit) scheduled...
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 5 of 5 (IPv6 Commit) started...
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> (enp4s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> Activation (enp4s0) Stage 5 of 5 (IPv6 Commit) complete.
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> (enp4s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> (enp4s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> NetworkManager state is now CONNECTED_LOCAL
Nov 08 16:35:43 pluto NetworkManager[2273]: <info> Activation (enp4s0) successful, device activated.
Nov 08 16:35:43 pluto dbus[2228]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Nov 08 16:35:43 pluto systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
Nov 08 16:35:43 pluto systemd[1]: Starting Network Manager Script Dispatcher Service...
Nov 08 16:35:43 pluto dbus[2228]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 08 16:35:43 pluto systemd[1]: Started Network Manager Script Dispatcher Service.
Nov 08 16:35:47 pluto dhcpcd[2239]: enp4s0: DHCP lease expired
Nov 08 16:35:47 pluto dhcpcd[2239]: enp4s0: soliciting a DHCP lease
Nov 08 16:35:48 pluto NetworkManager[2273]: <info> startup complete
Nov 08 16:35:50 pluto login[2276]: pam_unix(login:session): session opened for user lev by LOGIN(uid=0)
Nov 08 16:35:50 pluto systemd[1]: Starting user-1000.slice.
Nov 08 16:35:50 pluto systemd[1]: Created slice user-1000.slice.
Nov 08 16:35:50 pluto systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory.
Nov 08 16:35:50 pluto systemd[1]: Starting User Manager for UID 1000...
Nov 08 16:35:50 pluto systemd[1]: Starting Session c1 of user lev.
Nov 08 16:35:50 pluto systemd-logind[2271]: New session c1 of user lev.
Nov 08 16:35:50 pluto systemd[1]: Started Session c1 of user lev.
Nov 08 16:35:50 pluto systemd[2298]: pam_unix(systemd-user:session): session opened for user lev by (uid=0)
Nov 08 16:35:50 pluto systemd[2298]: Starting Paths.
Nov 08 16:35:50 pluto systemd[2298]: Reached target Paths.
Nov 08 16:35:50 pluto systemd[2298]: Starting Timers.
Nov 08 16:35:50 pluto systemd[2298]: Reached target Timers.
Nov 08 16:35:50 pluto systemd[2298]: Starting Sockets.
Nov 08 16:35:50 pluto systemd[2298]: Reached target Sockets.
Nov 08 16:35:50 pluto systemd[2298]: Starting Basic System.
Nov 08 16:35:50 pluto systemd[2298]: Reached target Basic System.
Nov 08 16:35:50 pluto systemd[2298]: Starting Default.
Nov 08 16:35:50 pluto systemd[2298]: Reached target Default.
Nov 08 16:35:50 pluto systemd[2298]: Startup finished in 73ms.
Nov 08 16:35:50 pluto systemd[1]: Started User Manager for UID 1000.
Nov 08 16:35:50 pluto login[2276]: LOGIN ON tty1 BY lev
Nov 08 16:35:55 pluto dhcpcd[2239]: enp4s0: no IPv6 Routers available
    Ich merke gerade, dass die Uhrzeit seltsamerweise falsch ist. Vllt. wegen dem Dualboot. Sollte aber nicht relevant sein.
  • In Bootvorgang friert bei NVidia-Bildschirm ein.
    Moinsen Leute,
    ich hatte schon längere Zeit keine Probleme, mit keiner meiner Maschinen, aber jetzt haben mein Notebook und mein PC angefangen herumzuspinnen.
    Da ich mein Notebook dringend funktionstüchtig brauche, habe ich vor einigen Tagen das Windows unter den Linuxen installiert (Ubuntu/ vorher war Antergos mit Cinnamon drauf). Läuft auch, fehlt nur noch die "Reparatur" meines PCs. Dort hatte ich Archlinux vor einigen Jahren installiert und auch nicht vorgehabt dem System ein Ende zu setzen.

    Nun zum Problem: Angefangen hat es alles nach dem Microcode-Update. Da ich aber ein AMD-Prozessor habe, kann es ja eigentlich nicht an diesem Update liegen. Auf jeden Fall friert der Bootvorgang ein, wenn der NVidia-Bildschirm erscheint, also dann, wenn der DM starten sollte.
    Ich habe erstmal den DM rausgenommen (systemctl), um zu sehen, ob das System generell nicht booten will, oder ob es wirklich am DM oder ähnlichem liegt.
    Ich kann das System jetzt benutzen, nur habe ich keine Idee, wo ich nach Fehlern überall suchen kann, um ihn schlussendlich zu eliminieren.

    Ich bitte also erstmal um Vorschläge, welche Logs ich auswerten kann.
    ps. Ich schreibe hier von dem Windoof auf dem selben Rechner. Ich hätte also Zugriff auf meine Files unter Linux.
  • In [Netzwerk] Verbindung wird hergestellt - gnome <-> nm-applet
    Moin,
    vielen Dank für die Antwort. Ich habe nicht mehr erwartet, dass jemand antwortet, weshalb ich diesen Thread auch nicht geschlossen habe (Falls das hier überhaupt geht.). Ich weiß nicht, was ich gemacht habe, aber der Clou war wohl einfach: network-manager neuinstallieren bzw. für die Zwischenzeit netctl benutzen. Etwas in die Richtung hat es gelöst. Vllt kam auch ein Update, was ich unbemerkt installiert hatte. Lange Rede, kurzer Sinn: Das Problem hat sich von selbst gelöst.
    Ich danke, dass du mir helfen wolltest.
    Wenn jemand doch solch einen gleichen Fehler hat, soll er mich per PN anschreiben, damit ich eine Problemlösung zusammenstellen und hier online stellen kann,

    Mfg, Lamarn
  • In [Netzwerk] Verbindung wird hergestellt - gnome <-> nm-applet
    Moinsen,
    zuerst wollte ich der Community danken, dass wir hier ein so schönes System inklusive super Community am Laufen haben.

    Dieses Forum hat mir so einige Male sehr geholfen, aber heute muss ich mal nachfragen, da ich dazu leider nichts gefunden habe.
    Mein Arch läuft mit Gnome (bei dem ich zur Zeit hängen geblieben bin, vorher habe ich Cinnamon benutzt, aber das war mir zu oft noch zu beta). Mit Gnome wird der networkmanager mitinstalliert sowie oben rechts in der Ecke integriert. Ich muss leider zurzeit einen Fritz! USB-Wlan-Stick benutzen, mit dem ich Schwierigkeiten habe.

    Das erste Problem ist, dass der Stick sich nicht automatisch bei Systemstart mit meinem Netzwerk verbindet, auch wenn ich es in den Einstellungen so geregelt habe.
    Das zweite Problem ist wohl ein Anzeigefehler. Wenn ich manuell mein Netzwerk ausgewählt habe, verbindet der Stick automatisch vollkommen korrekt, aber es wird nicht angezeigt, dass er verbunden ist. Stattdessen dreht sich das Rad munter weiter, obwohl bereits eine Verbindung hergestellt wurde.

    Das ist ziemlich seltsam. Ich hoffe jemand hatte bereits das Glück diese Probleme zu fixen.
    Ich freue mich auf Antworten, Lamarn