Arch Linux

Dual Monitor Arch Linux , Laptop Intel i7 10th Gen, NVIDIA RTX 3060

Dirk

Weil ich selbst davon betroffen war (bin):

https://www.techpowerup.com/244981/nvidia-has-a-displayport-problem-which-only-a-bios-update-can-fix

Eventuell mal eine andere Anschlussart benutzen?

(Auch wenns eigentlich um DP und nicht HDMI geht, aber ... Nvidia halt 🙂)

bxt0d

Hab leider kein DP anschluss am laptop . Empfiehlst du DP auf HDMI oder ein Adapter für DP ? Sollte eigentlich keine Rolle spielen oder?

Danke !

Dirk

Warte mal, du hast 'ne RTX 3060 im Laptop? Nicht schlecht ...

Hat das Laptop eventuell auch zwei Grafikkarten, die je nach bedarf genutzt werden?

So in der Richtung sonst mal gucken? -> https://wiki.archlinux.org/title/NVIDIA_Optimus

bxt0d

Jap 😁 habe 3060 drin aber wusste nicht das ich noch eine zweite hätte .. habe aber mal was gelesen mit Intel graphics oder so . Is das eine Grafikkarte ?😂 wobei ich selbst dafür Treiber geladen habe und ich mein das hat auch nicht funktioniert .. und die Sache mit dem Optimus manager habe ich auch schon gemacht , aber dadurch hat sich leider auch nichts verändert .. ich werde später aber nochmal die Seite komplett durch gehen und alles neu installieren was Optimus manager angeht , vielleicht habe ich ja irgendwo einen Fehler gemacht .

Gerry_Ghetto

Die Ausgaben von dmesg und vom Xorg.0.log könnten auch hilfreich sein.

bxt0d

[     2.624] (--) Log file renamed from "/var/log/Xorg.pid-2025.log" to "/var/log/Xorg.0.log"
[     2.625]
X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
[     2.625] Current Operating System: Linux yousuqq 6.2.8-zen1-1.1-zen #1 ZEN SMP PREEMPT_DYNAMIC Fri, 24 Mar 2023 05:15:37 +0000 x86_64
[     2.625] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=2d8f52cc-8e9e-4748-9dec-929196140712 rw rootflags=subvol=@ nvidia-drm.modeset=1 nowatchdog nvme_load=YES zswap>
[     2.625]
[     2.625] Current version of pixman: 0.42.2
[     2.625]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     2.625] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.625] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 30 18:16:18 2023
[     2.626] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     2.626] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.626] (==) No Layout section.  Using the first Screen section.
[     2.626] (==) No screen section available. Using defaults.
[     2.626] (**) |-->Screen "Default Screen Section" (0)
[     2.626] (**) |   |-->Monitor "<default monitor>"
[     2.626] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[     2.626] (**) |   |-->Device "integrated"
[     2.626] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     2.626] (==) Automatically adding devices
[     2.626] (==) Automatically enabling devices
[     2.626] (==) Automatically adding GPU devices
[     2.626] (==) Automatically binding GPU devices
[     2.626] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     2.626] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     2.626]    Entry deleted from font path.
[     2.626] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     2.626]    Entry deleted from font path.
[     2.626]    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     2.627] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[     2.627]    Entry deleted from font path.
[     2.627]    (Run 'mkfontdir' on "/usr/share/fonts/OTF").
[     2.627] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     2.627]    Entry deleted from font path.
[     2.627] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     2.627]    Entry deleted from font path.
[     2.627] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     2.627]    Entry deleted from font path.
[     2.627] (==) FontPath set to:

[     2.627] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.627] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.627] (II) Module ABI versions:
[     2.627]    X.Org ANSI C Emulation: 0.4
[     2.627]    X.Org Video Driver: 25.2
[     2.627]    X.Org XInput driver : 24.4
[     2.627]    X.Org Server Extension : 10.0
[     2.627] (++) using VT number 1

[     2.627] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     2.627] (II) xfree86: Adding drm device (/dev/dri/card0)
[     2.627] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     2.629] (--) PCI:*(0@0:2:0) 8086:9bc4:1462:12f2 rev 5, Mem @ 0xb0000000/16777216, 0xa0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[     2.629] (--) PCI: (1@0:0:0) 10de:2520:1462:12f2 rev 161, Mem @ 0x4200000000/8589934592, 0x4100000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[     2.629] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     2.629] (II) LoadModule: "glx"
[     2.630] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     2.633] (II) Module glx: vendor="X.Org Foundation"
[     2.633]    compiled for 1.21.1.7, module version = 1.0.0
[     2.633]    ABI class: X.Org Server Extension, version 10.0
[     2.633] (II) LoadModule: "modesetting"
[     2.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     2.635] (II) Module modesetting: vendor="X.Org Foundation"
[     2.635]    compiled for 1.21.1.7, module version = 1.21.1
[     2.635]    Module class: X.Org Video Driver
[     2.635]    ABI class: X.Org Video Driver, version 25.2
[     2.635] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     2.642] (II) modeset(0): using drv /dev/dri/card0
[     2.642] (II) modeset(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[     2.642] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     2.642] (==) modeset(0): RGB weight 888
[     2.642] (==) modeset(0): Default visual is TrueColor
[     2.642] (II) Loading sub module "glamoregl"
[     2.642] (II) LoadModule: "glamoregl"
[     2.642] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     2.645] (II) Module glamoregl: vendor="X.Org Foundation"
[     2.645]    compiled for 1.21.1.7, module version = 1.0.1
[     2.645]    ABI class: X.Org ANSI C Emulation, version 0.4
[     2.810] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) UHD Graphics (CML GT2)
[     2.810] (II) modeset(0): glamor initialized
[     2.810] (==) modeset(0): VariableRefresh: disabled
[     2.810] (==) modeset(0): AsyncFlipSecondaries: disabled
[     2.811] (II) modeset(0): Output eDP-1 has no monitor section
[     2.813] (II) modeset(0): EDID for output eDP-1
[     2.813] (II) modeset(0): Manufacturer: BOE  Model: 957  Serial#: 0
[     2.813] (II) modeset(0): Year: 2020  Week: 2
[     2.813] (II) modeset(0): EDID Version: 1.4
[     2.813] (II) modeset(0): Digital Display Input
[     2.813] (II) modeset(0): 8 bits per channel
[     2.813] (II) modeset(0): Digital interface is DisplayPort
[     2.813] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     2.813] (II) modeset(0): Gamma: 2.20
[     2.813] (II) modeset(0): No DPMS capabilities specified
[     2.813] (II) modeset(0): Supported color encodings: RGB 4:4:4
[     2.813] (II) modeset(0): First detailed timing is preferred mode
[     2.813] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     2.813] (II) modeset(0): Display is continuous-frequency
[     2.813] (II) modeset(0): redX: 0.588 redY: 0.364   greenX: 0.353 greenY: 0.571
[     2.813] (II) modeset(0): blueX: 0.162 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[     2.813] (II) modeset(0): Manufacturer's mask: 0
[     2.813] (II) modeset(0): Supported detailed timing:
[     2.813] (II) modeset(0): clock: 372.6 MHz   Image Size:  344 x 194 mm
[     2.813] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2200 h_border: 0
[     2.813] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1176 v_border: 0
[     2.813] (II) modeset(0): Supported detailed timing:
[     2.813] (II) modeset(0): clock: 124.2 MHz   Image Size:  344 x 194 mm
[     2.813] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2200 h_border: 0
[     2.813] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1176 v_border: 0
[     2.813] (II) modeset(0): Ranges: V min: 48 V max: 144 Hz, H min: 169 H max: 169 kHz, PixClock max 385 MHz
[     2.813] (II) modeset(0):  NV156FHM-NX3
[     2.813] (II) modeset(0): EDID (in hex):
[     2.813] (II) modeset(0):   00ffffffffffff0009e5570900000000
[     2.813] (II) modeset(0):   021e0104a52213780395b5965d5a9229
[     2.813] (II) modeset(0):   1e505400000001010101010101010101
[     2.813] (II) modeset(0):   01010101010188918018713860403020
[     2.813] (II) modeset(0):   360058c21000001a8230801871386040
[     2.813] (II) modeset(0):   3020360058c21000001a000000fd0030
[     2.813] (II) modeset(0):   90a9a926010a202020202020000000fe
[     2.813] (II) modeset(0):   004e5631353646484d2d4e58330a00d0
[     2.813] (II) modeset(0): Printing probed modes for output eDP-1
[     2.813] (II) modeset(0): Modeline "1920x1080"x144.0  372.56  1920 1968 2000 2200  1080 1083 1089 1176 +hsync -vsync (169.3 kHz eP)
[     2.813] (II) modeset(0): Modeline "1920x1080"x60.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[     2.813] (II) modeset(0): Modeline "1920x1080"x60.0  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[     2.813] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[     2.813] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[     2.813] (II) modeset(0): Modeline "1920x1080"x48.0  124.18  1920 1968 2000 2200  1080 1083 1089 1176 +hsync -vsync (56.4 kHz e)
[     2.813] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[     2.813] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[     2.813] (II) modeset(0): Modeline "1400x1050"x74.8  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
[     2.813] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     2.813] (II) modeset(0): Modeline "1600x900"x60.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[     2.813] (II) modeset(0): Modeline "1600x900"x59.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[     2.813] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[     2.813] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[     2.813] (II) modeset(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
[     2.813] (II) modeset(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
[     2.813] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     2.813] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[     2.813] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[     2.813] (II) modeset(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz d)
[     2.814] (II) modeset(0): Output eDP-1 connected
[     2.814] (II) modeset(0): Using exact sizes for initial modes
[     2.814] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[     2.814] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     2.814] (==) modeset(0): DPI set to (96, 96)
[     2.814] (II) Loading sub module "fb"
[     2.814] (II) LoadModule: "fb"
[     2.814] (II) Module "fb" already built-in
[     2.821] (==) modeset(0): Backing store enabled
[     2.821] (==) modeset(0): Silken mouse enabled
[     2.850] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[     2.850] (==) modeset(0): DPMS enabled
[     2.850] (WW) modeset(0): Option "DRI" is not used
[     2.850] (II) modeset(0): [DRI2] Setup complete
[     2.850] (II) modeset(0): [DRI2]   DRI driver: iris
[     2.850] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[     2.850] (II) Initializing extension Generic Event Extension
[     2.850] (II) Initializing extension SHAPE
[     2.850] (II) Initializing extension MIT-SHM
[     2.851] (II) Initializing extension XInputExtension
[     2.851] (II) Initializing extension XTEST
[     2.851] (II) Initializing extension BIG-REQUESTS
[     2.851] (II) Initializing extension SYNC
[     2.851] (II) Initializing extension XKEYBOARD
[     2.851] (II) Initializing extension XC-MISC
[     2.851] (II) Initializing extension SECURITY
[     2.851] (II) Initializing extension XFIXES
[     2.851] (II) Initializing extension RENDER
[     2.851] (II) Initializing extension RANDR
[     2.851] (II) Initializing extension COMPOSITE
[     2.851] (II) Initializing extension DAMAGE
[     2.851] (II) Initializing extension MIT-SCREEN-SAVER
[     2.851] (II) Initializing extension DOUBLE-BUFFER
[     2.851] (II) Initializing extension RECORD
[     2.851] (II) Initializing extension DPMS
[     2.851] (II) Initializing extension Present
[     2.851] (II) Initializing extension DRI3
[     2.852] (II) Initializing extension X-Resource
[     2.852] (II) Initializing extension XVideo
[     2.852] (II) Initializing extension XVideo-MotionCompensation
[     2.852] (II) Initializing extension GLX
[     2.856] (II) AIGLX: Loaded and initialized iris
[     2.856] (II) GLX: Initialized DRI2 GL provider for screen 0
[     2.856] (II) Initializing extension XFree86-VidModeExtension
[     2.856] (II) Initializing extension XFree86-DGA
[     2.856] (II) Initializing extension XFree86-DRI
[     2.856] (II) Initializing extension DRI2
[     2.856] (II) modeset(0): Damage tracking initialized
[     2.856] (II) modeset(0): Setting screen physical size to 508 x 285
[     2.882] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     2.882] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     2.882] (**) Power Button: Applying InputClass "system-keyboard"
[     2.882] (II) LoadModule: "libinput"
[     2.882] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     2.885] (II) Module libinput: vendor="X.Org Foundation"
[     2.885]    compiled for 1.21.1.4, module version = 1.2.1
[     2.885]    Module class: X.Org XInput Driver
[     2.885]    ABI class: X.Org XInput driver, version 24.4
[     2.885] (II) Using input driver 'libinput' for 'Power Button'
[     2.885] (**) Power Button: always reports core events
[     2.885] (**) Option "Device" "/dev/input/event3"
[     2.887] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     2.887] (II) event3  - Power Button: device is a keyboard
[     2.887] (II) event3  - Power Button: device removed
[     2.887] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     2.887] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     2.887] (**) Option "xkb_layout" "de"
[     2.899] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     2.899] (II) event3  - Power Button: device is a keyboard
[     2.899] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     2.899] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     2.899] (**) Video Bus: Applying InputClass "system-keyboard"
[     2.899] (II) Using input driver 'libinput' for 'Video Bus'
[     2.899] (**) Video Bus: always reports core events
[     2.899] (**) Option "Device" "/dev/input/event4"
     2.936] (II) event5  - Video Bus: device is a keyboard
[     2.936] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     2.936] (II) No input driver specified, ignoring this device.
[     2.936] (II) This device may have been added with another device file.
[     2.937] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     2.937] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     2.937] (**) Power Button: Applying InputClass "system-keyboard"
[     2.937] (II) Using input driver 'libinput' for 'Power Button'
[     2.937] (**) Power Button: always reports core events
[     2.937] (**) Option "Device" "/dev/input/event2"
[     2.937] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     2.937] (II) event2  - Power Button: device is a keyboard
[     2.937] (II) event2  - Power Button: device removed
[     2.937] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[     2.937] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     2.937] (**) Option "xkb_layout" "de"
[     2.938] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     2.938] (II) event2  - Power Button: device is a keyboard
[     2.939] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     2.939] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     2.939] (**) Sleep Button: Applying InputClass "system-keyboard"
[     2.939] (II) Using input driver 'libinput' for 'Sleep Button'
[     2.939] (**) Sleep Button: always reports core events
[     2.939] (**) Option "Device" "/dev/input/event1"
[     2.939] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     2.939] (II) event1  - Sleep Button: device is a keyboard
[     2.940] (II) event1  - Sleep Button: device removed
[     2.940] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     2.940] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[     2.940] (**) Option "xkb_layout" "de"
[     2.940] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     2.940] (II) event1  - Sleep Button: device is a keyboard
[     2.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[     2.941] (II) No input driver specified, ignoring this device.
[     2.941] (II) This device may have been added with another device file.
[     2.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[     2.941] (II) No input driver specified, ignoring this device.
[     2.941] (II) This device may have been added with another device file.
[     2.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event12)
[     2.941] (II) No input driver specified, ignoring this device.
[     2.941] (II) This device may have been added with another device file.
[     2.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[     2.941] (II) No input driver specified, ignoring this device.
[     2.941] (II) This device may have been added with another device file.
[     2.941] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[     2.941] (II) No input driver specified, ignoring this device.
[     2.941] (II) This device may have been added with another device file.
[     2.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[     2.942] (II) No input driver specified, ignoring this device.
[     2.942] (II) This device may have been added with another device file.
[     2.942] (II) config/udev: Adding input device CUST0001:00 04F3:30AA Mouse (/dev/input/event9)
[     2.942] (**) CUST0001:00 04F3:30AA Mouse: Applying InputClass "libinput pointer catchall"
[     2.942] (II) Using input driver 'libinput' for 'CUST0001:00 04F3:30AA Mouse'
[     2.942] (**) CUST0001:00 04F3:30AA Mouse: always reports core events
[     2.942] (**) Option "Device" "/dev/input/event9"
[     2.943] (II) event9  - CUST0001:00 04F3:30AA Mouse: is tagged by udev as: Mouse Pointingstick
[     2.944] (II) event9  - CUST0001:00 04F3:30AA Mouse: device is a pointer
[     2.944] (II) event9  - CUST0001:00 04F3:30AA Mouse: device removed
[     2.953] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-7/i2c-CUST0001:00/0018:04F3:30AA.0001/input/input15/event9"
[     2.953] (II) XINPUT: Adding extended input device "CUST0001:00 04F3:30AA Mouse" (type: MOUSE, id 11)
[     2.953] (**) Option "AccelerationScheme" "none"
[     2.953] (**) CUST0001:00 04F3:30AA Mouse: (accel) selected scheme none/0
[     2.953] (**) CUST0001:00 04F3:30AA Mouse: (accel) acceleration factor: 2.000
[     2.953] (**) CUST0001:00 04F3:30AA Mouse: (accel) acceleration threshold: 4
[     2.954] (II) event9  - CUST0001:00 04F3:30AA Mouse: is tagged by udev as: Mouse Pointingstick
[     2.954] (II) event9  - CUST0001:00 04F3:30AA Mouse: device is a pointer
[     2.955] (II) config/udev: Adding input device CUST0001:00 04F3:30AA Mouse (/dev/input/mouse0)
[     2.955] (II) No input driver specified, ignoring this device.
[     2.955] (II) This device may have been added with another device file.
[     2.956] (II) config/udev: Adding input device CUST0001:00 04F3:30AA Touchpad (/dev/input/event10)
[     2.956] (**) CUST0001:00 04F3:30AA Touchpad: Applying InputClass "libinput touchpad catchall"
[     2.956] (II) Using input driver 'libinput' for 'CUST0001:00 04F3:30AA Touchpad'
[     2.956] (**) Option "Device" "/dev/input/event10"
[     2.957] (II) event10 - CUST0001:00 04F3:30AA Touchpad: is tagged by udev as: Touchpad
[     2.958] (II) event10 - CUST0001:00 04F3:30AA Touchpad: device is a touchpad
[     2.958] (II) event10 - CUST0001:00 04F3:30AA Touchpad: device removed
[     2.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.2/i2c_designware.1/i2c-7/i2c-CUST0001:00/0018:04F3:30AA.0001/input/input17/event10"
[     2.968] (II) XINPUT: Adding extended input device "CUST0001:00 04F3:30AA Touchpad" (type: TOUCHPAD, id 12)
[     2.970] (**) Option "AccelerationScheme" "none"
[     2.970] (**) CUST0001:00 04F3:30AA Touchpad: (accel) selected scheme none/0
[     2.970] (**) CUST0001:00 04F3:30AA Touchpad: (accel) acceleration factor: 2.000
[     2.970] (**) CUST0001:00 04F3:30AA Touchpad: (accel) acceleration threshold: 4
[     2.971] (II) event10 - CUST0001:00 04F3:30AA Touchpad: is tagged by udev as: Touchpad
[     2.974] (II) event10 - CUST0001:00 04F3:30AA Touchpad: device is a touchpad
[     2.975] (II) config/udev: Adding input device CUST0001:00 04F3:30AA Touchpad (/dev/input/mouse1)
[     2.975] (II) No input driver specified, ignoring this device.
[     2.975] (II) This device may have been added with another device file.
[     2.976] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event16)
[     2.976] (II) No input driver specified, ignoring this device.
[     2.976] (II) This device may have been added with another device file.
[     2.977] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[     2.977] (II) No input driver specified, ignoring this device.
[     2.977] (II) This device may have been added with another device file.
[     2.978] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event18)
[     2.978] (II) No input driver specified, ignoring this device.
[     2.978] (II) This device may have been added with another device file.
[     2.978] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event19)
[     2.978] (II) No input driver specified, ignoring this device.
[     2.978] (II) This device may have been added with another device file.
[     2.979] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event20)
[     2.979] (II) No input driver specified, ignoring this device.
[     2.979] (II) This device may have been added with another device file.
[     2.980] (II) config/udev: Adding input device gpio-keys (/dev/input/event8)
[     2.980] (II) No input driver specified, ignoring this device.
[     2.980] (II) This device may have been added with another device file.
[     2.980] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[     2.980] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     2.980] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     2.980] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     2.981] (**) AT Translated Set 2 keyboard: always reports core events

Gerry_Ghetto . sorry wusste jetzt nicht wie mans hier so einfügt das man nicht die ganze seite vollballert^^

bxt0d

dmesg:

[    0.000000] microcode: microcode updated early to revision 0xf4, date = 2022-07-31
[    0.000000] Linux version 6.2.8-zen1-1.1-zen (linux-zen@archlinux) (gcc (GCC) 12.2.1 20230201, GNU ld (GNU Binutils) 2.40) #1 ZEN SMP PREEMPT_DYNAMIC Fri, 24 Mar 2023 05:15:37 +0000
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=2d8f52cc-8e9e-4748-9dec-929196140712 rw rootflags=subvol=@ nvidia-drm.modeset=1 nowatchdog nvme_load=YES zswap.enabled=0 loglevel=3
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: xstate_offset[9]:  960, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x21f, context size is 968 bytes, using 'compacted' format.
[    0.000000] signal: max sigframe size: 3632
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000005cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000005d000-0x000000000005dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000005e000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000092b28fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000092b29000-0x0000000097e6bfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000097e6c000-0x0000000097f9bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000097f9c000-0x0000000098474fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000098475000-0x0000000099993fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000099994000-0x0000000099c4dfff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000099c4e000-0x0000000099c4efff] usable
[    0.000000] BIOS-e820: [mem 0x0000000099c4f000-0x000000009f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI=0x98412000 ACPI 2.0=0x98412014 TPMFinalLog=0x983e1000 SMBIOS=0x9980f000 SMBIOS 3.0=0x9980e000 MEMATTR=0x8954c418 ESRT=0x8d002918
[    0.000000] efi: Remove mem263: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
[    0.000000] e820: remove [mem 0xe0000000-0xefffffff] reserved
[    0.000000] efi: Not removing mem264: MMIO range=[0xfe000000-0xfe010fff] (68KB) from e820 map
[    0.000000] efi: Not removing mem265: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem266: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[    0.000000] efi: Not removing mem267: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[    0.000000] efi: Remove mem268: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[    0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. GF65 Thin 10UE/MS-16W2, BIOS E16W2IMS.105 05/14/2021
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.000000] tsc: Detected 2599.992 MHz TSC
[    0.000977] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000980] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000989] last_pfn = 0x45e800 max_arch_pfn = 0x400000000
[    0.000995] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.001442] last_pfn = 0x99c4f max_arch_pfn = 0x400000000
[    0.009726] found SMP MP-table at [mem 0x000fce30-0x000fce3f]
[    0.009739] esrt: Reserving ESRT space from 0x000000008d002918 to 0x000000008d002978.
[    0.009748] e820: update [mem 0x8d002000-0x8d002fff] usable ==> reserved
[    0.009804] Using GB pages for direct mapping
[    0.010460] Secure boot disabled
[    0.010461] RAMDISK: [mem 0x35197000-0x368c2fff]
[    0.010465] ACPI: Early table checksum verification disabled
[    0.010469] ACPI: RSDP 0x0000000098412014 000024 (v02 MSI_NB)
[    0.010473] ACPI: XSDT 0x0000000098411728 0000DC (v01 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010479] ACPI: FACP 0x0000000097F95000 000114 (v06 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.010485] ACPI: DSDT 0x0000000097F56000 03EE85 (v02 MSI_NB MEGABOOK 01072009 INTL 20160527)
[    0.010488] ACPI: FACS 0x0000000098474000 000040
[    0.010491] ACPI: MCFG 0x0000000097F99000 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.010494] ACPI: SSDT 0x0000000097F96000 002087 (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.010498] ACPI: FIDT 0x0000000097F55000 00009C (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.010501] ACPI: SLIC 0x0000000097F9B000 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010504] ACPI: SSDT 0x0000000097F51000 0031DA (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.010507] ACPI: SSDT 0x0000000097F4E000 0029E7 (v02 Intel  PegSsdt  00001000 INTL 20160527)
[    0.010510] ACPI: HPET 0x0000000097F9A000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010513] ACPI: SSDT 0x0000000097F4A000 003194 (v02 INTEL  xh_cfhd4 00000000 INTL 20160527)
[    0.010516] ACPI: NHLT 0x0000000097F48000 001821 (v00 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010519] ACPI: LPIT 0x0000000097F47000 000094 (v01 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010522] ACPI: SSDT 0x0000000097F43000 002720 (v02 MSI_NB PtidDevc 00001000 INTL 20160527)
[    0.010525] ACPI: SSDT 0x0000000097F40000 0025B2 (v02 MSI_NB TbtTypeC 00000000 INTL 20160527)
[    0.010528] ACPI: DBGP 0x0000000097F3F000 000034 (v01 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010531] ACPI: DBG2 0x0000000097F3E000 000054 (v00 MSI_NB MEGABOOK 01072009 AMI  01000013)
[    0.010535] ACPI: SSDT 0x0000000097F3C000 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160527)
[    0.010538] ACPI: BGRT 0x0000000097F3B000 000038 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.010541] ACPI: TPM2 0x0000000097F3A000 00004C (v04 MSI_NB MEGABOOK 00000001 AMI  00000000)
[    0.010544] ACPI: DMAR 0x0000000097F3D000 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.010547] ACPI: SSDT 0x0000000097F36000 003749 (v01 OptRf1 Opt1Tabl 00001000 INTL 20160527)
[    0.010550] ACPI: WSMT 0x0000000097F46000 000028 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.010553] ACPI: APIC 0x0000000097F35000 0000F4 (v04 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.010556] ACPI: FPDT 0x0000000097F34000 000044 (v01 MSI_NB CML      01072009 AMI  01000013)
[    0.010559] ACPI: Reserving FACP table memory at [mem 0x97f95000-0x97f95113]
[    0.010560] ACPI: Reserving DSDT table memory at [mem 0x97f56000-0x97f94e84]
[    0.010562] ACPI: Reserving FACS table memory at [mem 0x98474000-0x9847403f]
[    0.010563] ACPI: Reserving MCFG table memory at [mem 0x97f99000-0x97f9903b]
[    0.010564] ACPI: Reserving SSDT table memory at [mem 0x97f96000-0x97f98086]
[    0.010564] ACPI: Reserving FIDT table memory at [mem 0x97f55000-0x97f5509b]
[    0.010565] ACPI: Reserving SLIC table memory at [mem 0x97f9b000-0x97f9b175]
[    0.010567] ACPI: Reserving SSDT table memory at [mem 0x97f51000-0x97f541d9]
[    0.010568] ACPI: Reserving SSDT table memory at [mem 0x97f4e000-0x97f509e6]
[    0.010569] ACPI: Reserving HPET table memory at [mem 0x97f9a000-0x97f9a037]
[    0.010570] ACPI: Reserving SSDT table memory at [mem 0x97f4a000-0x97f4d193]
[    0.010571] ACPI: Reserving NHLT table memory at [mem 0x97f48000-0x97f49820]
[    0.010572] ACPI: Reserving LPIT table memory at [mem 0x97f47000-0x97f47093]
[    0.010573] ACPI: Reserving SSDT table memory at [mem 0x97f43000-0x97f4571f]
[    0.010574] ACPI: Reserving SSDT table memory at [mem 0x97f40000-0x97f425b1]
[    0.010575] ACPI: Reserving DBGP table memory at [mem 0x97f3f000-0x97f3f033]
[    0.010576] ACPI: Reserving DBG2 table memory at [mem 0x97f3e000-0x97f3e053]
[    0.010577] ACPI: Reserving SSDT table memory at [mem 0x97f3c000-0x97f3c0ad]
[    0.010578] ACPI: Reserving BGRT table memory at [mem 0x97f3b000-0x97f3b037]
[    0.010579] ACPI: Reserving TPM2 table memory at [mem 0x97f3a000-0x97f3a04b]
[    0.010580] ACPI: Reserving DMAR table memory at [mem 0x97f3d000-0x97f3d0a7]
[    0.010581] ACPI: Reserving SSDT table memory at [mem 0x97f36000-0x97f39748]
[    0.010582] ACPI: Reserving WSMT table memory at [mem 0x97f46000-0x97f46027]
[    0.010583] ACPI: Reserving APIC table memory at [mem 0x97f35000-0x97f350f3]
[    0.010584] ACPI: Reserving FPDT table memory at [mem 0x97f34000-0x97f34043]
[    0.010781] No NUMA configuration found
[    0.010782] Faking a node at [mem 0x0000000000000000-0x000000045e7fffff]
[    0.010785] NODE_DATA(0) allocated [mem 0x45e7fb000-0x45e7fffff]
[    0.010817] Zone ranges:
[    0.010817]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010820]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.010821]   Normal   [mem 0x0000000100000000-0x000000045e7fffff]
[    0.010823]   Device   empty
[    0.010824] Movable zone start for each node
[    0.010825] Early memory node ranges
[    0.010825]   node   0: [mem 0x0000000000001000-0x000000000005cfff]
[    0.010827]   node   0: [mem 0x000000000005e000-0x000000000009ffff]
[    0.010828]   node   0: [mem 0x0000000000100000-0x0000000092b28fff]
[    0.010829]   node   0: [mem 0x0000000099c4e000-0x0000000099c4efff]
[    0.010830]   node   0: [mem 0x0000000100000000-0x000000045e7fffff]
[    0.010833] Initmem setup node 0 [mem 0x0000000000001000-0x000000045e7fffff]
[    0.010837] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010839] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010861] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.014470] On node 0, zone DMA32: 28965 pages in unavailable ranges
[    0.034439] On node 0, zone Normal: 25521 pages in unavailable ranges
[    0.034514] On node 0, zone Normal: 6144 pages in unavailable ranges
[    0.034552] Reserving Intel graphics memory at [mem 0x9b800000-0x9f7fffff]
[    0.034818] ACPI: PM-Timer IO Port: 0x1808
[    0.034826] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.034828] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.034829] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.034830] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.034831] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.034831] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.034832] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.034833] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.034834] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.034835] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.034836] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.034837] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.034877] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.034880] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034882] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034887] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.034888] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.034898] e820: update [mem 0x8940d000-0x89500fff] usable ==> reserved
[    0.034912] TSC deadline timer available
[    0.034912] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.034933] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.034935] PM: hibernation: Registered nosave memory: [mem 0x0005d000-0x0005dfff]
[    0.034938] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.034939] PM: hibernation: Registered nosave memory: [mem 0x8940d000-0x89500fff]
[    0.034941] PM: hibernation: Registered nosave memory: [mem 0x8d002000-0x8d002fff]
[    0.034943] PM: hibernation: Registered nosave memory: [mem 0x92b29000-0x97e6bfff]
[    0.034944] PM: hibernation: Registered nosave memory: [mem 0x97e6c000-0x97f9bfff]
[    0.034945] PM: hibernation: Registered nosave memory: [mem 0x97f9c000-0x98474fff]
[    0.034946] PM: hibernation: Registered nosave memory: [mem 0x98475000-0x99993fff]
[    0.034947] PM: hibernation: Registered nosave memory: [mem 0x99994000-0x99c4dfff]
[    0.034949] PM: hibernation: Registered nosave memory: [mem 0x99c4f000-0x9f7fffff]
[    0.034949] PM: hibernation: Registered nosave memory: [mem 0x9f800000-0xfdffffff]
[    0.034950] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.034951] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.034952] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.034953] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.034954] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.034954] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[    0.034955] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.034956] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[    0.034958] [mem 0x9f800000-0xfdffffff] available for PCI devices
[    0.034959] Booting paravirtualized kernel on bare hardware
[    0.034961] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.041872] setup_percpu: NR_CPUS:320 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[    0.042507] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.042515] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.042518] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[    0.042545] Fallback order for Node 0: 0
[    0.042548] Built 1 zonelists, mobility grouping on.  Total pages: 4068829
[    0.042549] Policy zone: Normal
[    0.042551] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=2d8f52cc-8e9e-4748-9dec-929196140712 rw rootflags=subvol=@ nvidia-drm.modeset=1 nowatchdog nvme_load=YES zswap.enabled=0 loglevel=3
[    0.042665] Unknown kernel command line parameters "BOOT_IMAGE=/@/boot/vmlinuz-linux-zen nvme_load=YES", will be passed to user space.
[    0.042702] random: crng init done
[    0.044089] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.044785] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.045125] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.045132] software IO TLB: area num 16.
[    0.087273] Memory: 15943992K/16534304K available (18432K kernel code, 2116K rwdata, 12452K rodata, 3440K init, 3788K bss, 590052K reserved, 0K cma-reserved)
[    0.087419] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.087444] ftrace: allocating 44569 entries in 175 pages
[    0.095955] ftrace: allocated 175 pages with 6 groups
[    0.096024] Dynamic Preempt: full
[    0.096057] rcu: Preemptible hierarchical RCU implementation.
[    0.096058] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.096059] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.096060] 	Trampoline variant of Tasks RCU enabled.
[    0.096061] 	Rude variant of Tasks RCU enabled.
[    0.096061] 	Tracing variant of Tasks RCU enabled.
[    0.096062] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.096063] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.099117] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.099384] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.099684] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.099722] Console: colour dummy device 80x25
[    0.099724] printk: console [tty0] enabled
[    0.099768] ACPI: Core revision 20221020
[    0.100137] hpet: HPET dysfunctional in PC10. Force disabled.
[    0.100139] APIC: Switch to symmetric I/O mode setup
[    0.100140] DMAR: Host address width 39
[    0.100141] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.100147] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.100150] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.100154] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.100156] DMAR: RMRR base: 0x0000009899c000 end: 0x00000098be5fff
[    0.100158] DMAR: RMRR base: 0x0000009b000000 end: 0x0000009f7fffff
[    0.100160] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.100162] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.100163] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.102039] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.102041] x2apic enabled
[    0.102064] Switched APIC routing to cluster x2apic.
[    0.107022] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns
[    0.107029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=2599992)
[    0.107032] pid_max: default: 32768 minimum: 301
[    0.108026] LSM: initializing lsm=capability,landlock,lockdown,yama,integrity,bpf
[    0.108026] landlock: Up and running.
[    0.108026] Yama: becoming mindful.
[    0.108026] LSM support for eBPF active
[    0.108026] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.108026] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.108026] x86/cpu: SGX disabled by BIOS.
[    0.108026] CPU0: Thermal monitoring enabled (TM1)
[    0.108026] process: using mwait in idle threads
[    0.108026] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.108026] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.108026] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.108026] Spectre V2 : Mitigation: Enhanced IBRS
[    0.108026] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.108026] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.108026] RETBleed: Mitigation: Enhanced IBRS
[    0.108026] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.108026] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.108026] MMIO Stale Data: Mitigation: Clear CPU buffers
[    0.108026] SRBDS: Mitigation: Microcode
[    0.108026] Freeing SMP alternatives memory: 48K
[    0.108026] smpboot: CPU0: Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz (family: 0x6, model: 0xa5, stepping: 0x2)
[    0.108026] cblist_init_generic: Setting adjustable number of callback queues.
[    0.108026] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.108026] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.108026] cblist_init_generic: Setting shift to 4 and lim to 1.
[    0.108026] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.108026] ... version:                4
[    0.108026] ... bit width:              48
[    0.108026] ... generic registers:      4
[    0.108026] ... value mask:             0000ffffffffffff
[    0.108026] ... max period:             00007fffffffffff
[    0.108026] ... fixed-purpose events:   3
[    0.108026] ... event mask:             000000070000000f
[    0.108026] Estimated ratio of average max frequency by base frequency (times 1024): 1811
[    0.108026] rcu: Hierarchical SRCU implementation.
[    0.108026] rcu: 	Max phase no-delay instances is 400.
[    0.108042] smp: Bringing up secondary CPUs ...
[    0.108123] x86: Booting SMP configuration:
[    0.108124] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.120820] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.120820]   #7  #8  #9 #10 #11
[    0.124158] smp: Brought up 1 node, 12 CPUs
[    0.124158] smpboot: Max logical packages: 1
[    0.124158] smpboot: Total of 12 processors activated (62399.80 BogoMIPS)
[    0.125520] devtmpfs: initialized
[    0.125520] x86/mm: Memory block size: 128MB
[    0.126628] ACPI: PM: Registering ACPI NVS region [mem 0x97f9c000-0x98474fff] (5083136 bytes)
[    0.126628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.126628] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.126628] pinctrl core: initialized pinctrl subsystem
[    0.127028] PM: RTC time: 16:16:16, date: 2023-03-30
[    0.127437] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.127680] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.127812] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.127943] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.127956] audit: initializing netlink subsys (disabled)
[    0.127963] audit: type=2000 audit(1680192976.020:1): state=initialized audit_enabled=0 res=1
[    0.128081] thermal_sys: Registered thermal governor 'fair_share'
[    0.128082] thermal_sys: Registered thermal governor 'bang_bang'
[    0.128083] thermal_sys: Registered thermal governor 'step_wise'
[    0.128084] thermal_sys: Registered thermal governor 'user_space'
[    0.128085] thermal_sys: Registered thermal governor 'power_allocator'
[    0.128101] cpuidle: using governor ladder
[    0.128101] cpuidle: using governor menu
[    0.128101] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.128101] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.128164] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.128169] PCI: not using MMCONFIG
[    0.128170] PCI: Using configuration type 1 for base access
[    0.128475] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.128478] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.130031] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130031] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    0.130031] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130031] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.130158] ACPI: Added _OSI(Module Device)
[    0.130159] ACPI: Added _OSI(Processor Device)
[    0.130161] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.130162] ACPI: Added _OSI(Processor Aggregator Device)
[    0.215476] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.224118] ACPI: Dynamic OEM Table Load:
[    0.224128] ACPI: SSDT 0xFFFF9F17C19BC000 0000FC (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.225145] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.226097] ACPI: Dynamic OEM Table Load:
[    0.226104] ACPI: SSDT 0xFFFF9F17C0F24C00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.227244] ACPI: Dynamic OEM Table Load:
[    0.227251] ACPI: SSDT 0xFFFF9F17C1A70800 0005BA (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.228473] ACPI: Dynamic OEM Table Load:
[    0.228478] ACPI: SSDT 0xFFFF9F17C1980E00 000137 (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.229516] ACPI: Dynamic OEM Table Load:
[    0.229523] ACPI: SSDT 0xFFFF9F17C0F2B000 000BEA (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.231136] ACPI: Dynamic OEM Table Load:
[    0.231143] ACPI: SSDT 0xFFFF9F17C1A74800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.232402] ACPI: Dynamic OEM Table Load:
[    0.232408] ACPI: SSDT 0xFFFF9F17C0F27800 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.233642] ACPI: Dynamic OEM Table Load:
[    0.233649] ACPI: SSDT 0xFFFF9F17C0F2C000 000D22 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.235656] ACPI: Dynamic OEM Table Load:
[    0.235663] ACPI: SSDT 0xFFFF9F17C0F20400 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.241618] ACPI: EC: EC started
[    0.241620] ACPI: EC: interrupt blocked
[    0.246503] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.246506] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[    0.246507] ACPI: Interpreter enabled
[    0.246558] ACPI: PM: (supports S0 S3 S4 S5)
[    0.246559] ACPI: Using IOAPIC for interrupt routing
[    0.247989] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.249310] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
[    0.249325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.249326] PCI: Using E820 reservations for host bridge windows
[    0.249813] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.252720] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[    0.270209] ACPI: \_SB_.PCI0.XDCI.USBC: New power resource
[    0.273314] ACPI: \_SB_.PCI0.SAT0.VOL0.V0PR: New power resource
[    0.273554] ACPI: \_SB_.PCI0.SAT0.VOL1.V1PR: New power resource
[    0.273781] ACPI: \_SB_.PCI0.SAT0.VOL2.V2PR: New power resource
[    0.277414] ACPI: \_SB_.PCI0.CNVW.WRST: New power resource
[    0.280429] ACPI: \PIN_: New power resource
[    0.280990] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.280997] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.283339] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.283341] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.284916] PCI host bridge to bus 0000:00
[    0.284919] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.284921] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.284922] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.284924] pci_bus 0000:00: root bus resource [mem 0x9f800000-0xdfffffff window]
[    0.284925] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.284926] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.284928] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.284955] pci 0000:00:00.0: [8086:9b54] type 00 class 0x060000
[    0.285025] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.285068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.285670] pci 0000:00:02.0: [8086:9bc4] type 00 class 0x030000
[    0.285679] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
[    0.285684] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.285688] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.285706] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.285708] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.285963] pci 0000:00:12.0: [8086:06f9] type 00 class 0x118000
[    0.285980] pci 0000:00:12.0: reg 0x10: [mem 0x400011f000-0x400011ffff 64bit]
[    0.286136] pci 0000:00:14.0: [8086:06ed] type 00 class 0x0c0330
[    0.286151] pci 0000:00:14.0: reg 0x10: [mem 0x4000100000-0x400010ffff 64bit]
[    0.286212] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.286896] pci 0000:00:14.2: [8086:06ef] type 00 class 0x050000
[    0.286912] pci 0000:00:14.2: reg 0x10: [mem 0x4000118000-0x4000119fff 64bit]
[    0.286923] pci 0000:00:14.2: reg 0x18: [mem 0x400011e000-0x400011efff 64bit]
[    0.287113] pci 0000:00:14.3: [8086:06f0] type 00 class 0x028000
[    0.287197] pci 0000:00:14.3: reg 0x10: [mem 0x4000114000-0x4000117fff 64bit]
[    0.287361] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.287795] pci 0000:00:15.0: [8086:06e8] type 00 class 0x0c8000
[    0.287873] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.288554] pci 0000:00:15.2: [8086:06ea] type 00 class 0x0c8000
[    0.288632] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.289220] pci 0000:00:16.0: [8086:06e0] type 00 class 0x078000
[    0.289240] pci 0000:00:16.0: reg 0x10: [mem 0x400011b000-0x400011bfff 64bit]
[    0.289314] pci 0000:00:16.0: PME# supported from D3hot
[    0.289819] pci 0000:00:1d.0: [8086:06b0] type 01 class 0x060400
[    0.289908] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.289937] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.290801] pci 0000:00:1d.4: [8086:06b4] type 01 class 0x060400
[    0.290881] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.290907] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.291776] pci 0000:00:1f.0: [8086:068d] type 00 class 0x060100
[    0.292251] pci 0000:00:1f.3: [8086:06c8] type 00 class 0x040300
[    0.292282] pci 0000:00:1f.3: reg 0x10: [mem 0x4000110000-0x4000113fff 64bit]
[    0.292318] pci 0000:00:1f.3: reg 0x20: [mem 0x4000000000-0x40000fffff 64bit]
[    0.292394] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.293608] pci 0000:00:1f.4: [8086:06a3] type 00 class 0x0c0500
[    0.293632] pci 0000:00:1f.4: reg 0x10: [mem 0x400011a000-0x400011a0ff 64bit]
[    0.293660] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.293953] pci 0000:00:1f.5: [8086:06a4] type 00 class 0x0c8000
[    0.293967] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.294111] pci 0000:01:00.0: [10de:2520] type 00 class 0x030000
[    0.294128] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff]
[    0.294143] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.294157] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff 64bit pref]
[    0.294165] pci 0000:01:00.0: reg 0x24: [io  0x0000-0x007f]
[    0.294173] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.294257] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.294317] pci 0000:01:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.294781] pci 0000:01:00.1: [10de:228e] type 00 class 0x040300
[    0.294799] pci 0000:01:00.1: reg 0x10: [mem 0xb1200000-0xb1203fff]
[    0.294992] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.294996] pci 0000:00:01.0:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.295092] pci 0000:02:00.0: [1344:5404] type 00 class 0x010802
[    0.295116] pci 0000:02:00.0: reg 0x10: [mem 0xb1100000-0xb1103fff 64bit]
[    0.295410] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.295415] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.295502] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.295521] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.295547] pci 0000:03:00.0: reg 0x18: [mem 0xb1004000-0xb1004fff 64bit]
[    0.295564] pci 0000:03:00.0: reg 0x20: [mem 0xb1000000-0xb1003fff 64bit]
[    0.295667] pci 0000:03:00.0: supports D1 D2
[    0.295668] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.295855] pci 0000:00:1d.4: PCI bridge to [bus 03]
[    0.295858] pci 0000:00:1d.4:   bridge window [io  0x3000-0x3fff]
[    0.295860] pci 0000:00:1d.4:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.298641] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    0.298758] ACPI: PCI: Interrupt link LNKB configured for IRQ 1
[    0.298871] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.298983] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    0.299097] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.299210] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    0.299325] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    0.299437] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    0.299956] ACPI: EC: interrupt unblocked
[    0.299958] ACPI: EC: event unblocked
[    0.299973] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.299975] ACPI: EC: GPE=0x13
[    0.299976] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[    0.299978] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[    0.300060] iommu: Default domain type: Translated
[    0.300060] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.300176] SCSI subsystem initialized
[    0.301035] libata version 3.00 loaded.
[    0.301039] ACPI: bus type USB registered
[    0.301046] usbcore: registered new interface driver usbfs
[    0.301054] usbcore: registered new interface driver hub
[    0.301060] usbcore: registered new device driver usb
[    0.301078] pps_core: LinuxPPS API ver. 1 registered
[    0.301079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.301081] PTP clock support registered
[    0.301090] EDAC MC: Ver: 3.0.0
[    0.301258] Registered efivars operations
[    0.302215] NetLabel: Initializing
[    0.302217] NetLabel:  domain hash size = 128
[    0.302218] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.302233] NetLabel:  unlabeled traffic allowed by default
[    0.302238] mctp: management component transport protocol core
[    0.302239] NET: Registered PF_MCTP protocol family
[    0.302242] PCI: Using ACPI for IRQ routing
[    0.345365] PCI: pci_cache_line_size set to 64 bytes
[    0.345620] e820: reserve RAM buffer [mem 0x0005d000-0x0005ffff]
[    0.345639] e820: reserve RAM buffer [mem 0x8940d000-0x8bffffff]
[    0.345640] e820: reserve RAM buffer [mem 0x8d002000-0x8fffffff]
[    0.345641] e820: reserve RAM buffer [mem 0x92b29000-0x93ffffff]
[    0.345642] e820: reserve RAM buffer [mem 0x99c4f000-0x9bffffff]
[    0.345643] e820: reserve RAM buffer [mem 0x45e800000-0x45fffffff]
[    0.346041] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.346041] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.346041] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.346041] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.346042] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.346044] vgaarb: loaded
[    0.348027] clocksource: Switched to clocksource tsc-early
[    0.348041] VFS: Disk quotas dquot_6.6.0
[    0.348041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.348041] pnp: PnP ACPI init
[    0.348041] pnp 00:00: disabling [mem 0x40000000-0x403fffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.348041] pnp 00:03: disabling [io  0x002e-0x002f] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x004e-0x004f] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x0061] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x0063] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x0065] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x0067] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] pnp 00:03: disabling [io  0x0070] because it overlaps 0000:01:00.0 BAR 5 [io  0x0000-0x007f]
[    0.348041] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.348041] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.348978] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.349499] pnp 00:06: disabling [mem 0xfd000000-0xfd69ffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349502] pnp 00:06: disabling [mem 0xfd6c0000-0xfd6cffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349504] pnp 00:06: disabling [mem 0xfd6f0000-0xfdffffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349506] pnp 00:06: disabling [mem 0xfe000000-0xfe01ffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349507] pnp 00:06: disabling [mem 0xfe200000-0xfe7fffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349509] pnp 00:06: disabling [mem 0xff000000-0xffffffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.349530] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.349886] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.350570] pnp 00:08: disabling [mem 0xfed10000-0xfed17fff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350573] pnp 00:08: disabling [mem 0xfed18000-0xfed18fff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350575] pnp 00:08: disabling [mem 0xfed19000-0xfed19fff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350576] pnp 00:08: disabling [mem 0xe0000000-0xefffffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350578] pnp 00:08: disabling [mem 0xfed20000-0xfed3ffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350580] pnp 00:08: disabling [mem 0xfed90000-0xfed93fff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350581] pnp 00:08: disabling [mem 0xfed45000-0xfed8ffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350583] pnp 00:08: disabling [mem 0xfee00000-0xfeefffff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.350790] pnp 00:09: disabling [mem 0xfe038000-0xfe038fff] because it overlaps 0000:01:00.0 BAR 1 [mem 0x00000000-0x1ffffffff 64bit pref]
[    0.351217] pnp: PnP ACPI: found 10 devices
[    0.356698] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.356760] NET: Registered PF_INET protocol family
[    0.356917] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.360201] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.360239] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.360307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.360552] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.360822] TCP: Hash tables configured (established 131072 bind 65536)
[    0.360911] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    0.360960] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.361003] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.361065] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.361070] NET: Registered PF_XDP protocol family
[    0.361091] pci 0000:00:01.0: BAR 15: assigned [mem 0x4100000000-0x43ffffffff 64bit pref]
[    0.361095] pci 0000:00:01.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.361097] pci 0000:00:15.0: BAR 0: assigned [mem 0x400011c000-0x400011cfff 64bit]
[    0.361153] pci 0000:00:15.2: BAR 0: assigned [mem 0x400011d000-0x400011dfff 64bit]
[    0.361209] pci 0000:01:00.0: BAR 1: assigned [mem 0x4200000000-0x43ffffffff 64bit pref]
[    0.361220] pci 0000:01:00.0: BAR 3: assigned [mem 0x4100000000-0x4101ffffff 64bit pref]
[    0.361232] pci 0000:01:00.0: BAR 0: no space for [mem size 0x01000000]
[    0.361233] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x01000000]
[    0.361235] pci 0000:01:00.0: BAR 6: assigned [mem 0xb1280000-0xb12fffff pref]
[    0.361237] pci 0000:01:00.0: BAR 5: assigned [io  0x5000-0x507f]
[    0.361241] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.361243] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.361246] pci 0000:00:01.0:   bridge window [mem 0xb1200000-0xb12fffff]
[    0.361248] pci 0000:00:01.0:   bridge window [mem 0x4100000000-0x43ffffffff 64bit pref]
[    0.361252] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.361259] pci 0000:00:1d.0:   bridge window [mem 0xb1100000-0xb11fffff]
[    0.361265] pci 0000:00:1d.4: PCI bridge to [bus 03]
[    0.361267] pci 0000:00:1d.4:   bridge window [io  0x3000-0x3fff]
[    0.361270] pci 0000:00:1d.4:   bridge window [mem 0xb1000000-0xb10fffff]
[    0.361276] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.361277] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.361279] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.361280] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.361281] pci_bus 0000:00: resource 7 [mem 0x9f800000-0xdfffffff window]
[    0.361283] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[    0.361284] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
[    0.361285] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.361286] pci_bus 0000:01: resource 1 [mem 0xb1200000-0xb12fffff]
[    0.361288] pci_bus 0000:01: resource 2 [mem 0x4100000000-0x43ffffffff 64bit pref]
[    0.361289] pci_bus 0000:02: resource 1 [mem 0xb1100000-0xb11fffff]
[    0.361291] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.361292] pci_bus 0000:03: resource 1 [mem 0xb1000000-0xb10fffff]
[    0.361957] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.362022] PCI: CLS 64 bytes, default 64
[    0.362047] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.362048] software IO TLB: mapped [mem 0x0000000084e02000-0x0000000088e02000] (64MB)
[    0.362068] Trying to unpack rootfs image as initramfs...
[    0.363190] Initialise system trusted keyrings
[    0.363198] Key type blacklist registered
[    0.363234] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    0.363244] zbud: loaded
[    0.363372] integrity: Platform Keyring initialized
[    0.363374] integrity: Machine keyring initialized
[    0.372276] Key type asymmetric registered
[    0.372278] Asymmetric key parser 'x509' registered
[    0.372295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    0.372340] io scheduler mq-deadline registered
[    0.372341] io scheduler kyber registered
[    0.372355] io scheduler bfq registered
[    0.374869] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[    0.375096] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
[    0.375155] pcieport 0000:00:1d.0: AER: enabled with IRQ 123
[    0.375193] pcieport 0000:00:1d.0: DPC: enabled with IRQ 123
[    0.375194] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.375436] pcieport 0000:00:1d.4: PME: Signaling with IRQ 124
[    0.375482] pcieport 0000:00:1d.4: AER: enabled with IRQ 124
[    0.375521] pcieport 0000:00:1d.4: DPC: enabled with IRQ 124
[    0.375522] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.375603] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.375888] Monitor-Mwait will be used to enter C-1 state
[    0.375899] Monitor-Mwait will be used to enter C-2 state
[    0.375905] Monitor-Mwait will be used to enter C-3 state
[    0.375909] ACPI: \_SB_.PR00: Found 3 idle states
[    0.376733] ACPI: AC: AC Adapter [ADP1] (on-line)
[    0.376789] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/PNP0C09:00/PNP0C0D:00/input/input0
[    0.380058] ACPI: button: Lid Switch [LID0]
[    0.380095] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.380113] ACPI: button: Sleep Button [SLPB]
[    0.380137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.380149] ACPI: button: Power Button [PWRB]
[    0.380169] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.384086] ACPI: button: Power Button [PWRF]
[    0.386474] thermal LNXTHERM:00: registered as thermal_zone0
[    0.386477] ACPI: thermal: Thermal Zone [THRM] (43 C)
[    0.387291] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.393522] hpet_acpi_add: no address or irqs in _CRS
[    0.393616] Non-volatile memory driver v1.3
[    0.393617] Linux agpgart interface v0.103
[    0.402037] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    0.402859] ACPI: bus type drm_connector registered
[    0.403077] usbcore: registered new interface driver usbserial_generic
[    0.403081] usbserial: USB Serial support registered for generic
[    0.403157] rtc_cmos 00:04: RTC can wake from S4
[    0.404267] rtc_cmos 00:04: registered as rtc0
[    0.404474] rtc_cmos 00:04: setting system clock to 2023-03-30T16:16:16 UTC (1680192976)
[    0.404498] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
[    0.404858] intel_pstate: Intel P-state driver initializing
[    0.405395] intel_pstate: HWP enabled
[    0.405526] ledtrig-cpu: registered to indicate activity on CPUs
[    0.405685] efifb: probing for efifb
[    0.405691] efifb: framebuffer at 0xa0000000, using 8128k, total 8128k
[    0.405691] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.405692] efifb: scrolling: redraw
[    0.405692] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.405710] fbcon: Deferring console take-over
[    0.405710] fb0: EFI VGA frame buffer device
[    0.405724] hid: raw HID events driver (C) Jiri Kosina
[    0.405752] intel_pmc_core INT33A1:00:  initialized
[    0.405801] drop_monitor: Initializing network drop monitor service
[    0.412656] Initializing XFRM netlink socket
[    0.412682] NET: Registered PF_INET6 protocol family
[    0.431646] Freeing initrd memory: 23728K
[    0.435269] Segment Routing with IPv6
[    0.435270] RPL Segment Routing with IPv6
[    0.435277] In-situ OAM (IOAM) with IPv6
[    0.435295] NET: Registered PF_PACKET protocol family
[    0.436245] microcode: Microcode Update Driver: v2.2.
[    0.436250] IPI shorthand broadcast: enabled
[    0.437070] sched_clock: Marking stable (429590269, 7437471)->(474949067, -37921327)
[    0.437329] registered taskstats version 1
[    0.437808] Loading compiled-in X.509 certificates
[    0.439382] Loaded X.509 cert 'Build time autogenerated kernel key: df67086096a66f49825f5b197f6a70234cd58925'
[    0.439612] zswap: loaded using pool lz4/z3fold
[    0.440549] Key type .fscrypt registered
[    0.440550] Key type fscrypt-provisioning registered
[    0.440819] integrity: Loading X.509 certificate: UEFI:db
[    0.440833] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.440833] integrity: Loading X.509 certificate: UEFI:db
[    0.440842] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.441489] PM:   Magic number: 15:652:288
[    0.441506] tty tty21: hash matches
[    0.441515] acpi ACPI000E:00: hash matches
[    0.441520] acpi device:8c: hash matches
[    0.441617] RAS: Correctable Errors collector initialized.
[    0.498528] ACPI: battery: Slot [BAT1] (battery present)
[    0.501136] Freeing unused decrypted memory: 2036K
[    0.502303] Freeing unused kernel image (initmem) memory: 3440K
[    0.502311] Write protecting the kernel read-only data: 32768k
[    0.503513] Freeing unused kernel image (rodata/data gap) memory: 1884K
[    0.539392] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.539397] rodata_test: all tests were successful
[    0.539403] Run /init as init process
[    0.539405]   with arguments:
[    0.539406]     /init
[    0.539408]   with environment:
[    0.539409]     HOME=/
[    0.539410]     TERM=linux
[    0.539411]     BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
[    0.539412]     nvme_load=YES
[    0.560201] fbcon: Taking over console
[    0.560290] Console: switching to colour frame buffer device 240x67
[    0.797532] Console: switching to colour dummy device 80x25
[    0.797548] i915 0000:00:02.0: vgaarb: deactivate vga console
[    0.798564] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    0.799790] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    0.843150] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[    0.850664] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.851322] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    0.851582] ACPI: video: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    0.851664] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:01/input/input5
[    0.853943] fbcon: i915drmfb (fb0) is primary device
[    0.854424] Console: switching to colour frame buffer device 240x67
[    0.866710] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    0.964929] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.969066] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.969070] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.973354] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.973360] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.974430] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.974584] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.974586] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.974587] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.974625] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.02
[    0.974627] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.974628] usb usb1: Product: xHCI Host Controller
[    0.974629] usb usb1: Manufacturer: Linux 6.2.8-zen1-1.1-zen xhci-hcd
[    0.974630] usb usb1: SerialNumber: 0000:00:14.0
[    0.974723] hub 1-0:1.0: USB hub found
[    0.974740] hub 1-0:1.0: 16 ports detected
[    0.976216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.02
[    0.976218] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.976219] usb usb2: Product: xHCI Host Controller
[    0.976220] usb usb2: Manufacturer: Linux 6.2.8-zen1-1.1-zen xhci-hcd
[    0.976220] usb usb2: SerialNumber: 0000:00:14.0
[    0.976277] hub 2-0:1.0: USB hub found
[    0.976288] hub 2-0:1.0: 8 ports detected
[    0.976559] usb: port power management may be unreliable
[    0.979796] nvme 0000:02:00.0: platform quirk: setting simple suspend
[    0.979833] nvme nvme0: pci function 0000:02:00.0
[    0.992104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    0.999550] nvme nvme0: 12/0/0 default/read/poll queues
[    1.005308]  nvme0n1: p1 p2
[    1.020284] raid6: skipped pq benchmark and selected avx2x4
[    1.020285] raid6: using avx2x2 recovery algorithm
[    1.022299] xor: automatically using best checksumming function   avx
[    1.088436] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes
[    1.088785] BTRFS: device fsid 2d8f52cc-8e9e-4748-9dec-929196140712 devid 1 transid 322 /dev/nvme0n1p2 scanned by (udev-worker) (172)
[    1.101042] BTRFS info (device nvme0n1p2): using crc32c (crc32c-intel) checksum algorithm
[    1.101046] BTRFS info (device nvme0n1p2): using free space tree
[    1.103664] BTRFS info (device nvme0n1p2): enabling ssd optimizations
[    1.103665] BTRFS info (device nvme0n1p2): auto enabling async discard
[    1.162773] systemd[1]: systemd 253.1-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[    1.162777] systemd[1]: Detected architecture x86-64.
[    1.163237] systemd[1]: Hostname set to <yousuqq>.
[    1.212244] usb 1-14: new full-speed USB device number 2 using xhci_hcd
[    1.339822] usb 1-14: New USB device found, idVendor=8087, idProduct=0026, bcdDevice= 0.02
[    1.339835] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.418326] tsc: Refined TSC clocksource calibration: 2592.005 MHz
[    1.418347] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cbb91cef, max_idle_ns: 440795297256 ns
[    1.418461] clocksource: Switched to clocksource tsc
[    1.446232] systemd[1]: bpf-lsm: LSM BPF program attached
[    1.501292] zram: Added device: zram0
[    1.539807] systemd[1]: Queued start job for default target Graphical Interface.
[    1.548759] systemd[1]: Created slice Slice /system/getty.
[    1.549025] systemd[1]: Created slice Slice /system/modprobe.
[    1.549231] systemd[1]: Created slice Slice /system/systemd-fsck.
[    1.549415] systemd[1]: Created slice Slice /system/systemd-zram-setup.
[    1.549561] systemd[1]: Created slice User and Session Slice.
[    1.549635] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.549698] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.549821] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.549886] systemd[1]: Reached target Local Encrypted Volumes.
[    1.549928] systemd[1]: Reached target Login Prompts.
[    1.549968] systemd[1]: Reached target Local Integrity Protected Volumes.
[    1.550017] systemd[1]: Reached target Path Units.
[    1.550063] systemd[1]: Reached target Remote File Systems.
[    1.550103] systemd[1]: Reached target Slice Units.
[    1.550151] systemd[1]: Reached target Local Verity Protected Volumes.
[    1.550220] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.550664] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.551237] systemd[1]: Listening on Process Core Dump Socket.
[    1.551502] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.551598] systemd[1]: Listening on Journal Socket.
[    1.551863] systemd[1]: Listening on udev Control Socket.
[    1.551945] systemd[1]: Listening on udev Kernel Socket.
[    1.552429] systemd[1]: Mounting Huge Pages File System...
[    1.552863] systemd[1]: Mounting POSIX Message Queue File System...
[    1.553314] systemd[1]: Mounting Kernel Debug File System...
[    1.553774] systemd[1]: Mounting Kernel Trace File System...
[    1.554296] systemd[1]: Starting Create List of Static Device Nodes...
[    1.554733] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    1.555317] systemd[1]: Starting Load Kernel Module configfs...
[    1.555824] systemd[1]: Starting Load Kernel Module dm_mod...
[    1.556435] systemd[1]: Starting Load Kernel Module drm...
[    1.557267] systemd[1]: Starting Load Kernel Module fuse...
[    1.557997] systemd[1]: Starting Load Kernel Module loop...
[    1.559701] systemd[1]: Starting Journal Service...
[    1.560479] systemd[1]: Starting Load Kernel Modules...
[    1.560564] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
[    1.561213] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.561912] loop: module loaded
[    1.561991] systemd[1]: Starting Coldplug All udev Devices...
[    1.563216] systemd[1]: Mounted Huge Pages File System.
[    1.563354] systemd[1]: Mounted POSIX Message Queue File System.
[    1.563480] systemd[1]: Mounted Kernel Debug File System.
[    1.563596] systemd[1]: Mounted Kernel Trace File System.
[    1.565477] BTRFS info (device nvme0n1p2: state M): use zstd compression, level 3
[    1.567146] device-mapper: uevent: version 1.0.3
[    1.567208] fuse: init (API version 7.38)
[    1.567215] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    1.567740] systemd-journald[287]: Collecting audit messages is disabled.
[    1.572349] Asymmetric key parser 'pkcs8' registered
[    1.574196] systemd[1]: Finished Create List of Static Device Nodes.
[    1.575150] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    1.583187] systemd[1]: Finished Load Kernel Module configfs.
[    1.583369] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[    1.592168] systemd[1]: Finished Load Kernel Module dm_mod.
[    1.592300] systemd[1]: Started Journal Service.
[    1.856921] zram0: detected capacity change from 0 to 8067072
[    1.902402] soc_button_array ACPI0011:00: Unknown button index 0 upage 01 usage c6, ignoring
[    1.965835] Adding 4033532k swap on /dev/zram0.  Priority:100 extents:1 across:4033532k SSDscFS
[    1.968364] systemd-journald[287]: Received client request to flush runtime journal.
[    1.974227] systemd-journald[287]: /var/log/journal/a882e88e53cf48e8aca2eea27826b56b/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
[    1.974233] systemd-journald[287]: Rotating system journal.
[    1.995090] intel_pch_thermal 0000:00:12.0: enabling device (0000 -> 0002)
[    2.015041] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
[    2.034691] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.036573] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.052359] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.056885] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.056968] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.058143] i2c i2c-6: 2/2 memory slots populated (from DMI)
[    2.058427] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.058595] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.058650] i2c i2c-6: Successfully instantiated SPD at 0x50

Gerry_Ghetto

Du nutzt also den linux-zen Kernel? Das hast du wohl irgendwie vergessen zu erwähnen. Diesbezüglich wäre dann auch interessant zu wissen, welchen Treiber du wie installiert hast.

Du hast den Kernelparameter nvidia-drm.modeset=1 gesetzt. Du könntest mal probieren, ob sich das Verhalten ändert, wenn du den Parameter weglässt.

bxt0d

oh ok, sorry ! wie ich was gemacht habe kann ich jetzt nichtmehr so genau sagen ... hab jetzt den Kernelparameter gelöscht. Keine veränderung leider . habe mit pacman -Qs nvidia die treiber gecheckt das ist der output:

local/egl-wayland 2:1.1.11-3.1
    EGLStream-based Wayland external platform
local/lib32-libvdpau 1.5-1
    Nvidia VDPAU library
local/lib32-nvidia-utils 530.41.03-1
    NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 530.41.03-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.5-1.1
    Nvidia VDPAU library
local/libxnvctrl 530.41.03-1
    NVIDIA NV-CONTROL X extension
local/mhwd-nvidia 525.60.11-1
    mhwd-nvidia pci id
local/mhwd-nvidia-390xx 390.154-1
    mhwd-nvidia-390xx PCI ID database
local/mhwd-nvidia-470xx 470.94-1
    mhwd-nvidia-470xx PCI ID database
local/nvidia-dkms 530.41.03-1
    NVIDIA drivers - module sources
local/nvidia-prime 1.0-4
    NVIDIA Prime Render Offload configuration and utilities
local/nvidia-settings 530.41.03-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 530.41.03-1
    NVIDIA drivers utilities
local/opencl-nvidia 530.41.03-1
    OpenCL implemention for NVIDIA

Gerry_Ghetto

Für mich sieht es nicht so aus, als ob die Nvidia-Treiber korrekt installiert wurden.

Ich sehe nirgendwo, dass die Nvidia-Firmware geladen wird. Auch der X-Server lädt keinen Nvidia-Treiber.

Für die interne GPU von Intel werden hingegen Firmware und Module geladen. Und das interne Display wird auch entsprechend erkannt.

Ich würde an deiner Stelle die folgenden Dinge tun:

Das ganze Nvidia-Zeug deinstallieren und zwar gründlich.
Den normalen Kernel installieren und dann die dazu passenden Nvidia-Treiber aus den Paketquellen installieren.
Und für sich selbst eine Dokumentation anlegen (Welche Befehle wurden ausgeführt? Welche Konfiguration angelegt/angepasst?)

bxt0d

Dirk Danke! super, weiss ich jetzt bescheid. Wird in zukunft so gemacht.

Also.. Gerry_Ghetto Ich bin leider echt noch kein profi, habe also alles getan um die richtigen befehle zu recherchieren. Ich habe nun mit sudo pacman -R linux-zen den Zen Kernel deinstalliert, danach mit sudo pacman -S linux linux-headers den Linux Kernel installiert, wo ich direkt bemerkt habe, dass meine Lüfter ziemlich laut sind , dauerhaft.
Mit sudo pacman -Rns nvidia wollte ich die treiber deinstallieren, habe aber den output bekommen, dass das ziel nicht gefunden wurde.
mit sudo pacman -Rns nvidia-utils hat er mir dann diese Treiber deinstalliert, gefolgt von sudo pacman -Rns nvidia-dkms ,sudo pacman -Rns lib32-nvidia-utils, sudo pacman -Rns lib32-opencl-nvidia und sudo pacman -Rns opencl-nvidia. Diese hat er mir dann auch deinstalliert wobei ich bemerkt habe, dass meine lüfter direkt leise wurden. (nach pacman -Rns nvidia-dkms mein ich.
Muss zugeben, CHATGPT nach noch ein paar befehlen gefragt zu haben , weil ich bei pacman -Qs nvidia immernoch diesen output bekommen habe :

local/egl-wayland 2:1.1.11-3.1
    EGLStream-based Wayland external platform
local/lib32-libvdpau 1.5-1
    Nvidia VDPAU library
local/lib32-opencl-nvidia 530.41.03-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.5-1.1
    Nvidia VDPAU library
local/mhwd-nvidia 525.60.11-1
    mhwd-nvidia pci id
local/mhwd-nvidia-390xx 390.154-1
    mhwd-nvidia-390xx PCI ID database
local/mhwd-nvidia-470xx 470.94-1
    mhwd-nvidia-470xx PCI ID database

GPT hat mir den befehl gegeben: sudo pacman -Rns $(pacman -Qq | grep "^nvidia") den ich dann auch ausgeführt habe, dabei hab ich trozdem die fehlermeldung `Fehler: Vorgang konnte nicht vorbereitet werden (Kann Abhängigkeiten nicht erfüllen)

:: Entfernen von mhwd-nvidia verletzt Abhängigkeit »mhwd-nvidia«, benötigt von mhwd-db-cachyos
:: Entfernen von mhwd-nvidia verletzt Abhängigkeit »mhwd-nvidia>=525«, benötigt von mhwd-db-cachyos
:: Entfernen von mhwd-nvidia-470xx verletzt Abhängigkeit »mhwd-nvidia-470xx«, benötigt von mhwd-db-cachyos
:: Entfernen von mhwd-nvidia-390xx verletzt Abhängigkeit »mhwd-nvidia-390xx«, benötigt von mhwd-db-cachyos

Den Rest der noch mit NVIDIA zutun hatte habe ich Manuell mit pacman -Rns deinstalliert.

nun habe ich immernoch diese sachen :

local/egl-wayland 2:1.1.11-3.1
    EGLStream-based Wayland external platform
local/lib32-libvdpau 1.5-1
    Nvidia VDPAU library
local/libvdpau 1.5-1.1
    Nvidia VDPAU library
local/mhwd-nvidia 525.60.11-1
    mhwd-nvidia pci id
local/mhwd-nvidia-390xx 390.154-1
    mhwd-nvidia-390xx PCI ID database
local/mhwd-nvidia-470xx 470.94-1
    mhwd-nvidia-470xx PCI ID database

das mhwd zeug krieg ich irgendwie nicht runner..

habe noch anschliessend die treiber mit sudo pacman -S nvidia installiert (output von pacman -Qs nvidia ist gleich geblieben) und nochmal alles mit sudo pacman -Syu geupdatet und jetzt ist mein Latein am ende ! 😃 Ich werde solang auch nichtsmehr anfassen bis ich hier weitere Anweisungen von euch bekommen habe, um nix durcheinander zu werfen. Ich bin echt neu in dem gebiet Linux , hoffe aber, das konnte eine kleine Übersicht schaffen!

PS: Dirk sieht doch schon viel ordentlicher aus , oder ? :p

Dirk

@bxt0d Lange Code-Blöcke einfach in dreifache Backticks (```) vor und nach dem Codeblock auf einer eigenen Zeile einschließen, dann wird das ordentlich in ein Codefenster gepackt, und ballert das Forum nicht voll. 🙂

Alternativ geht auch, erst den Code einzufügen, diesen dann zu markieren, und dann den Code-Button im Editor zu drücken. Einfache Backticks (`) direkt vor und nach dem Code, oder erst den Code-Button im Editor zu drücken, funktioniert nur mit einfachen Code-Zeilen.

Ich habe die Anpassung in deinen vorherigen Posts hier mal erledigt

Dirk

bxt0d PS: Dirk sieht doch schon viel ordentlicher aus , oder ? :p

Nicht wirklich 😃 Aber ich habs nochmal korrigiert. 🙂

Wie gesagt: Entweder manuell ``` vor und nach den Codeblöcken allein stehend auf einer eigenen Zeile einfügen, oder erst den Code in den Editor pasten, diesen dann markieren, und dann den Code-Button drücken

Gerry_Ghetto

bxt0d GPT hat mir den befehl gegeben: sudo pacman -Rns $(pacman -Qq | grep "^nvidia") den ich dann auch ausgeführt habe, dabei hab ich trozdem die fehlermeldung `Fehler: Vorgang konnte nicht vorbereitet werden (Kann Abhängigkeiten nicht erfüllen)

Bitte informier dich, was diese Befehlskombination genau macht. Und dann verstehst du auch, dass das so nicht klappen kann.

bxt0d

@Gerry_Ghetto hab nachgeschaut und nix gefunden.. du könntest es mir aber auch bitte hier einfach erklären ??

.. naja habs jetzt manuell deinstalliert und habe nurnoch dies :

local/egl-wayland 2:1.1.11-3.1 EGLStream-based Wayland external platform local/libvdpau 1.5-1.1 Nvidia VDPAU library

Gerry_Ghetto

bxt0d hab nachgeschaut und nix gefunden.. du könntest es mir aber auch bitte hier einfach erklären ??

Oh, Verzeihung, wie unachtsam von mir. Natürlich helfe ich dir sehr gerne dabei, Befehle zu verstehen, die du auf deinem System ausgeführt hast, ohne sie selbst zu verstehen.

Also fangen wir mal hinten an: pacman -Qq listet dir alle installierten Pakete auf. Die Ausgabe wird aber nicht wie üblich auf den Standardausgabekanal geschrieben, sondern an den nächsten Befehl als Eingabe weitergeleitet. Der nächste Befehl grep "^nvidia" filtert dann alle Zeilen aus, die nicht mit "nvidia" beginnen. Also auch Zeichenketten, die irgendwo später ein "nvidia" als Unterzeichenkette enthalten.

Die Befehle pacman -Qq | grep "^nvidia" werden in einer Subshell ausgeführt. Die Rückgabe wird dabei vom Befehl pacman -Rns verwendet, der alle Pakete, die nicht mehr als Abhängigkeiten von anderen genutzt werden, entfernt und dabei Dateisicherungen ignoriert.

Damit das auch klappt, wird das ganze natürlich mit erhöhten Rechten ausgeführt (dank sudo).

Ich wünsche dir auch weiterhin viel Glück.

bxt0d

Gerry_Ghetto Ich hab GPT gefragt und bin trozdem nicht zu dem schluss gekommen wieso es nicht klappt. danach habe ich habe den kompletten befehl gesucht, ohne dran zu denken, den aufzuteilen und so nachzuschauen, wäre dann vielleicht leichter gefallen. habe es aber gelöst bekommen indem ich es manuell deinstalliert habe. Danke dir trozdem für die erklärung, ich habe jedoch gesagt das ich nachgeschaut habe, anscheinend hast du also kein bock mir zu helfen, wieso antwortest du dann ? ich bin seit wochen dran - bin ein anfänger und habe nicht umsonst hier ein post aufgegeben. aber vielen dank, solche antworten kannst du dir sparen, dann lieber garnicht antworten. Danke für die glückwunsche, wünsche ich dir auch. 🙂

GerBra

@bxt0d
Wenn man lang an was dranhängt, dann nervt das. Aber komm trotzdem mal etwas runter. V.a. da Gerrry_Gheto genau deinem Wunsch entsprochen hat - eben den Befehl zu erklären - mit etwas Sarkasmus, aber das sollte verkraftbar sein.

Was mich wundert: Woher kommen die Manjaro-Nvidia-Pakete auf deinem System? Also z.B.

local/mhwd-nvidia 525.60.11-1
    mhwd-nvidia pci id
local/mhwd-nvidia-390xx 390.154-1
    mhwd-nvidia-390xx PCI ID database
local/mhwd-nvidia-470xx 470.94-1
    mhwd-nvidia-470xx PCI ID database

Hast du nun Archlinux oder Manjaro?
Oder evtl. sogar Manjaro-Repos in Archlinux eingebunden? Wenn das der Fall wäre, dann poste doch bitte mal deine /etc/pacman.conf

Und beschreibe was du bei

bxt0d habe es aber gelöst bekommen indem ich es manuell deinstalliert habe

genau gemacht hast. Evtl. kann man dich davor bewahren dein System zu "zerschießen" bevor du dich dem ursächlichen Problem zuwenden kannst.

bxt0d

GerBra Bei mir ist doch alles gut. Kann natürlich sein, dass ich was missverstanden habe, dann bitte ich das zu entschuldigen. Jedoch Sarkastisch ist der post aber nicht grade rübergekommen, sorry. Der letzte Satz eben auch nicht ! Wenn man bedenkt das ich hier ganz vernünftig um hilfe bitte.

als ich den output hatte:
local/mhwd-nvidia 525.60.11-1 mhwd-nvidia pci id local/mhwd-nvidia-390xx 390.154-1 mhwd-nvidia-390xx PCI ID database local/mhwd-nvidia-470xx 470.94-1 mhwd-nvidia-470xx PCI ID database

habe ich alles mit sudo pacman -Rns manuell deinstalliert .. z.B sudo pacman -Rns mhwd-nvidia-390xx usw..
bis ich halt das ganze NVIDIA zeug weg hatte, wie von gerry gefordert. nun :
local/egl-wayland 2:1.1.11-3.1 EGLStream-based Wayland external platform local/libvdpau 1.5-1.1 Nvidia VDPAU library

Woher die ganzen Manjaro-Nvidia-Pakete her gekommen sind , kann ich leider wirklich nicht sagen..... sorry 🙁
Manjaro habe ich definitiv nicht . ich habe CachyOS, ist eine ziemlich neue distro basierend auf ArchLinux, wusste jedoch nicht das das auch ein unterschied macht.. sorry, mein fehler, wie gesagt bin newbie.

pacman.conf :

#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
#GPGDir      = /etc/pacman.d/gnupg/
#HookDir     = /etc/pacman.d/hooks/
HoldPkg     = pacman glibc
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta    = 0.7
Architecture = auto

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options
#UseSyslog
Color
ILoveCandy
#NoProgressBar
#CheckSpace
VerbosePkgLists
DisableDownloadTimeout
ParallelDownloads = 10

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel    = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.

#
# REPOSITORIES
#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#   - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# cachyos repos
[cachyos-v3]
Include = /etc/pacman.d/cachyos-v3-mirrorlist

[cachyos-community-v3]
Include = /etc/pacman.d/cachyos-v3-mirrorlist

[cachyos]
Include = /etc/pacman.d/cachyos-mirrorlist

# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.

#[testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

#[community-testing]
#Include = /etc/pacman.d/mirrorlist

[community]
Include = /etc/pacman.d/mirrorlist

# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

[multilib]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

Martin-MS

bxt0d Woher die ganzen Manjaro-Nvidia-Pakete her gekommen sind , kann ich leider wirklich nicht sagen

Die kommen von hier:

# cachyos repos
[cachyos-v3]
Include = /etc/pacman.d/cachyos-v3-mirrorlist

[cachyos-community-v3]
Include = /etc/pacman.d/cachyos-v3-mirrorlist

[cachyos]
Include = /etc/pacman.d/cachyos-mirrorlist

CachyOS ist ein Arch-Derivat und gehört nicht zu einer Arch-Standardinstallation, also musst du sie irgendwann selber mal als Paketquellen aufgenommen haben, oder einem Prozess ausdrücklich gestattet haben, dies zu tun.

Eine unzulässige Vermengung von Paketquellen verschiedener Distribution sollte man tunlichst vermeiden, um unerwünschte Seiteneffekte zu verhindern.

bxt0d

Martin-MS Danke, für die schnelle Antwort ! . Hoffe hab da jetzt nichts durcheinander geschmissen durch diese Sache mit den Manjaro Paketen. Da werde ich in Zukunft drauf achten.

Nächste Seite »