So, ich habe jetzt den LTS-Kernel installiert. leider ohne Erfolg. Ich kann im geoeffnetten Fenster schreiben /scrollen (was ich gerade tue) aber eben das Fesnter nicht mehr schliessen oder ein anderes Programm oeffnen.
Ich werd den nouveau-Treiber mal noch testen, der hatte jedoch vor 2 Monaten Abstuerze verursacht. Wenn es bei dem laeuft liegts am Nvidia-Treiber.
EDIT: Eben konnte ich nach 5 Minuten ein weiteres Programm starten und danach haengt es wieder.
EDIT2: Ich habe jetzt den nouveau im Einsatz und bis jetzt hatte ich keine Freezes/Abstürze. Sieht also so aus, dass der nvidia-Treiber der Bösewicht war/ist.
EDIT3: Nach einem Systemstart hängt X, wenn ich X kille und mich wieder einlogge läuft alles rund. Doch hardwareseitige Probleme?
Hier noch die /var/log/Xorg.0.log
[ 142.584]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.585]
X.Org X Server 1.10.3.901 (1.10.4 RC 1)
Release Date: 2011-07-29
[ 142.585] X Protocol Version 11, Revision 0
[ 142.585] Build Operating System: Linux 3.0.0-ARCH x86_64
[ 142.585] Current Operating System: Linux Utgard 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 142.585] Kernel command line: root=/dev/sdb2 ro
[ 142.585] Build Date: 08 August 2011 08:24:13AM
[ 142.585]
[ 142.585] Current version of pixman: 0.22.2
[ 142.585] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.585] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.585] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 3 07:34:22 2011
[ 142.586] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.586] (==) No Layout section. Using the first Screen section.
[ 142.586] (==) No screen section available. Using defaults.
[ 142.586] (**) |-->Screen "Default Screen Section" (0)
[ 142.586] (**) | |-->Monitor "<default monitor>"
[ 142.586] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 142.587] (==) Automatically adding devices
[ 142.587] (==) Automatically enabling devices
[ 142.587] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.587] Entry deleted from font path.
[ 142.587] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.587] Entry deleted from font path.
[ 142.587] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.587] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.587] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 142.587] (II) Loader magic: 0x7d3620
[ 142.587] (II) Module ABI versions:
[ 142.587] X.Org ANSI C Emulation: 0.4
[ 142.587] X.Org Video Driver: 10.0
[ 142.587] X.Org XInput driver : 12.2
[ 142.587] X.Org Server Extension : 5.0
[ 142.588] (--) PCI:*(0:1:0:0) 10de:0ca3:1043:8326 rev 162, Mem @ 0xfb000000/16777216, 0xc0000000/268435456, 0xde000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[ 142.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.589] (II) LoadModule: "extmod"
[ 142.589] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.589] (II) Module extmod: vendor="X.Org Foundation"
[ 142.589] compiled for 1.10.3.901, module version = 1.0.0
[ 142.589] Module class: X.Org Server Extension
[ 142.589] ABI class: X.Org Server Extension, version 5.0
[ 142.589] (II) Loading extension MIT-SCREEN-SAVER
[ 142.589] (II) Loading extension XFree86-VidModeExtension
[ 142.589] (II) Loading extension XFree86-DGA
[ 142.589] (II) Loading extension DPMS
[ 142.589] (II) Loading extension XVideo
[ 142.589] (II) Loading extension XVideo-MotionCompensation
[ 142.589] (II) Loading extension X-Resource
[ 142.589] (II) LoadModule: "dbe"
[ 142.590] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.590] (II) Module dbe: vendor="X.Org Foundation"
[ 142.590] compiled for 1.10.3.901, module version = 1.0.0
[ 142.590] Module class: X.Org Server Extension
[ 142.590] ABI class: X.Org Server Extension, version 5.0
[ 142.590] (II) Loading extension DOUBLE-BUFFER
[ 142.590] (II) LoadModule: "glx"
[ 142.590] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.590] (II) Module glx: vendor="X.Org Foundation"
[ 142.590] compiled for 1.10.3.901, module version = 1.0.0
[ 142.590] ABI class: X.Org Server Extension, version 5.0
[ 142.590] (==) AIGLX enabled
[ 142.590] (II) Loading extension GLX
[ 142.590] (II) LoadModule: "record"
[ 142.591] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.591] (II) Module record: vendor="X.Org Foundation"
[ 142.591] compiled for 1.10.3.901, module version = 1.13.0
[ 142.591] Module class: X.Org Server Extension
[ 142.591] ABI class: X.Org Server Extension, version 5.0
[ 142.591] (II) Loading extension RECORD
[ 142.591] (II) LoadModule: "dri"
[ 142.591] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.591] (II) Module dri: vendor="X.Org Foundation"
[ 142.591] compiled for 1.10.3.901, module version = 1.0.0
[ 142.591] ABI class: X.Org Server Extension, version 5.0
[ 142.591] (II) Loading extension XFree86-DRI
[ 142.591] (II) LoadModule: "dri2"
[ 142.592] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.592] (II) Module dri2: vendor="X.Org Foundation"
[ 142.592] compiled for 1.10.3.901, module version = 1.2.0
[ 142.592] ABI class: X.Org Server Extension, version 5.0
[ 142.592] (II) Loading extension DRI2
[ 142.592] (==) Matched nouveau as autoconfigured driver 0
[ 142.592] (==) Matched nv as autoconfigured driver 1
[ 142.592] (==) Matched nvidia as autoconfigured driver 2
[ 142.592] (==) Matched vesa as autoconfigured driver 3
[ 142.592] (==) Matched fbdev as autoconfigured driver 4
[ 142.592] (==) Assigned the driver to the xf86ConfigLayout
[ 142.592] (II) LoadModule: "nouveau"
[ 142.592] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 142.593] (II) Module nouveau: vendor="X.Org Foundation"
[ 142.593] compiled for 1.10.3, module version = 0.0.16
[ 142.593] Module class: X.Org Video Driver
[ 142.593] ABI class: X.Org Video Driver, version 10.0
[ 142.593] (II) LoadModule: "nv"
[ 142.593] (WW) Warning, couldn't open module nv
[ 142.593] (II) UnloadModule: "nv"
[ 142.593] (II) Unloading nv
[ 142.593] (EE) Failed to load module "nv" (module does not exist, 0)
[ 142.593] (II) LoadModule: "nvidia"
[ 142.594] (WW) Warning, couldn't open module nvidia
[ 142.594] (II) UnloadModule: "nvidia"
[ 142.594] (II) Unloading nvidia
[ 142.594] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 142.594] (II) LoadModule: "vesa"
[ 142.595] (WW) Warning, couldn't open module vesa
[ 142.595] (II) UnloadModule: "vesa"
[ 142.595] (II) Unloading vesa
[ 142.595] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 142.595] (II) LoadModule: "fbdev"
[ 142.595] (WW) Warning, couldn't open module fbdev
[ 142.595] (II) UnloadModule: "fbdev"
[ 142.595] (II) Unloading fbdev
[ 142.595] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 142.595] (II) NOUVEAU driver
[ 142.595] (II) NOUVEAU driver for NVIDIA chipset families :
[ 142.595] RIVA TNT (NV04)
[ 142.595] RIVA TNT2 (NV05)
[ 142.595] GeForce 256 (NV10)
[ 142.595] GeForce 2 (NV11, NV15)
[ 142.595] GeForce 4MX (NV17, NV18)
[ 142.595] GeForce 3 (NV20)
[ 142.596] GeForce 4Ti (NV25, NV28)
[ 142.596] GeForce FX (NV3x)
[ 142.596] GeForce 6 (NV4x)
[ 142.596] GeForce 7 (G7x)
[ 142.596] GeForce 8 (G8x)
[ 142.596] GeForce GTX 200 (NVA0)
[ 142.596] GeForce GTX 400 (NVC0)
[ 142.596] (--) using VT number 7
[ 142.598] drmOpenDevice: node name is /dev/dri/card0
[ 142.598] drmOpenDevice: open result is 7, (OK)
[ 142.598] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 142.598] drmOpenDevice: node name is /dev/dri/card0
[ 142.598] drmOpenDevice: open result is 7, (OK)
[ 142.598] drmOpenByBusid: drmOpenMinor returns 7
[ 142.598] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 142.598] (II) [drm] nouveau interface version: 0.0.16
[ 142.599] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 142.599] (II) Loading sub module "dri"
[ 142.599] (II) LoadModule: "dri"
[ 142.599] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.599] (II) Module dri: vendor="X.Org Foundation"
[ 142.599] compiled for 1.10.3.901, module version = 1.0.0
[ 142.599] ABI class: X.Org Server Extension, version 5.0
[ 142.599] (II) NOUVEAU(0): Loaded DRI module
[ 142.599] drmOpenDevice: node name is /dev/dri/card0
[ 142.599] drmOpenDevice: open result is 8, (OK)
[ 142.599] drmOpenDevice: node name is /dev/dri/card0
[ 142.599] drmOpenDevice: open result is 8, (OK)
[ 142.599] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 142.599] drmOpenDevice: node name is /dev/dri/card0
[ 142.599] drmOpenDevice: open result is 8, (OK)
[ 142.599] drmOpenByBusid: drmOpenMinor returns 8
[ 142.599] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 142.599] (II) [drm] DRM interface version 1.4
[ 142.600] (II) [drm] DRM open master succeeded.
[ 142.600] (--) NOUVEAU(0): Chipset: "NVIDIA NVa3"
[ 142.600] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 142.600] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 142.600] (==) NOUVEAU(0): RGB weight 888
[ 142.600] (==) NOUVEAU(0): Default visual is TrueColor
[ 142.600] (==) NOUVEAU(0): Using HW cursor
[ 142.600] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 142.600] (==) NOUVEAU(0): Page flipping enabled
[ 142.705] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 142.811] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 142.819] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 142.924] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 143.030] (II) NOUVEAU(0): EDID for output VGA-1
[ 143.030] (II) NOUVEAU(0): Manufacturer: SAM Model: 1f9 Serial#: 1296707897
[ 143.030] (II) NOUVEAU(0): Year: 2006 Week: 31
[ 143.030] (II) NOUVEAU(0): EDID Version: 1.3
[ 143.030] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 143.030] (II) NOUVEAU(0): Sync: Separate Composite
[ 143.030] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 143.030] (II) NOUVEAU(0): Gamma: 2.20
[ 143.030] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 143.030] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 143.030] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
[ 143.030] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.310 whiteY: 0.330
[ 143.030] (II) NOUVEAU(0): Supported established timings:
[ 143.030] (II) NOUVEAU(0): 720x400@70Hz
[ 143.030] (II) NOUVEAU(0): 640x480@60Hz
[ 143.030] (II) NOUVEAU(0): 640x480@67Hz
[ 143.030] (II) NOUVEAU(0): 640x480@72Hz
[ 143.030] (II) NOUVEAU(0): 640x480@75Hz
[ 143.030] (II) NOUVEAU(0): 800x600@56Hz
[ 143.030] (II) NOUVEAU(0): 800x600@60Hz
[ 143.030] (II) NOUVEAU(0): 800x600@72Hz
[ 143.030] (II) NOUVEAU(0): 800x600@75Hz
[ 143.030] (II) NOUVEAU(0): 832x624@75Hz
[ 143.030] (II) NOUVEAU(0): 1024x768@60Hz
[ 143.030] (II) NOUVEAU(0): 1024x768@70Hz
[ 143.030] (II) NOUVEAU(0): 1024x768@75Hz
[ 143.030] (II) NOUVEAU(0): 1280x1024@75Hz
[ 143.030] (II) NOUVEAU(0): 1152x864@75Hz
[ 143.030] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 143.030] (II) NOUVEAU(0): Supported standard timings:
[ 143.030] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 143.030] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 143.030] (II) NOUVEAU(0): Supported detailed timing:
[ 143.030] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 143.030] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 143.030] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 143.030] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 143.030] (II) NOUVEAU(0): Monitor name: SyncMaster
[ 143.030] (II) NOUVEAU(0): Serial No: H9NL733321
[ 143.031] (II) NOUVEAU(0): EDID (in hex):
[ 143.031] (II) NOUVEAU(0): 00ffffffffffff004c2df90139314a4d
[ 143.031] (II) NOUVEAU(0): 1f1001036c261e782a6f86a25a4d9424
[ 143.031] (II) NOUVEAU(0): 1a4f54bfef808180714f010101010101
[ 143.031] (II) NOUVEAU(0): 010101010101302a009851002a403070
[ 143.031] (II) NOUVEAU(0): 1300782d1100001e000000fd00384b1e
[ 143.031] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
[ 143.031] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
[ 143.031] (II) NOUVEAU(0): 0048394e4c3733333332310a2020007e
[ 143.031] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 143.031] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 143.031] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 143.039] (II) NOUVEAU(0): EDID for output HDMI-1
[ 143.039] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 143.039] (II) NOUVEAU(0): Output VGA-1 connected
[ 143.039] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 143.039] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 143.039] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
[ 143.039] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 143.039] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
[ 143.039] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 143.039] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 143.039] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 143.040] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 143.040] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 143.040] (==) NOUVEAU(0): DPI set to (96, 96)
[ 143.040] (II) Loading sub module "fb"
[ 143.040] (II) LoadModule: "fb"
[ 143.040] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 143.041] (II) Module fb: vendor="X.Org Foundation"
[ 143.041] compiled for 1.10.3.901, module version = 1.0.0
[ 143.041] ABI class: X.Org ANSI C Emulation, version 0.4
[ 143.041] (II) Loading sub module "exa"
[ 143.041] (II) LoadModule: "exa"
[ 143.041] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 143.041] (II) Module exa: vendor="X.Org Foundation"
[ 143.041] compiled for 1.10.3.901, module version = 2.5.0
[ 143.041] ABI class: X.Org Video Driver, version 10.0
[ 143.041] (II) Loading sub module "shadowfb"
[ 143.041] (II) LoadModule: "shadowfb"
[ 143.041] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 143.042] (II) Module shadowfb: vendor="X.Org Foundation"
[ 143.042] compiled for 1.10.3.901, module version = 1.0.0
[ 143.042] ABI class: X.Org ANSI C Emulation, version 0.4
[ 143.042] (--) Depth 24 pixmap format is 32 bpp
[ 143.049] (II) NOUVEAU(0): Opened GPU channel 2
[ 143.049] (II) NOUVEAU(0): [DRI2] Setup complete
[ 143.049] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 143.049] (II) NOUVEAU(0): GART: 512MiB available
[ 143.053] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 143.053] (II) EXA(0): Driver allocated offscreen pixmaps
[ 143.054] (II) EXA(0): Driver registered support for the following operations:
[ 143.054] (II) Solid
[ 143.054] (II) Copy
[ 143.054] (II) Composite (RENDER acceleration)
[ 143.054] (II) UploadToScreen
[ 143.054] (II) DownloadFromScreen
[ 143.054] (==) NOUVEAU(0): Backing store disabled
[ 143.054] (==) NOUVEAU(0): Silken mouse enabled
[ 143.054] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 143.054] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 143.054] (==) NOUVEAU(0): DPMS enabled
[ 143.054] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 143.055] (--) RandR disabled
[ 143.055] (II) Initializing built-in extension Generic Event Extension
[ 143.055] (II) Initializing built-in extension SHAPE
[ 143.055] (II) Initializing built-in extension MIT-SHM
[ 143.055] (II) Initializing built-in extension XInputExtension
[ 143.055] (II) Initializing built-in extension XTEST
[ 143.055] (II) Initializing built-in extension BIG-REQUESTS
[ 143.055] (II) Initializing built-in extension SYNC
[ 143.055] (II) Initializing built-in extension XKEYBOARD
[ 143.055] (II) Initializing built-in extension XC-MISC
[ 143.055] (II) Initializing built-in extension SECURITY
[ 143.055] (II) Initializing built-in extension XINERAMA
[ 143.055] (II) Initializing built-in extension XFIXES
[ 143.055] (II) Initializing built-in extension RENDER
[ 143.055] (II) Initializing built-in extension RANDR
[ 143.055] (II) Initializing built-in extension COMPOSITE
[ 143.055] (II) Initializing built-in extension DAMAGE
[ 143.072] (II) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/nouveau_dri.so failed (/usr/lib/xorg/modules/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
[ 143.072] (II) AIGLX: reverting to software rendering
[ 143.072] (II) AIGLX: Screen 0 is not DRI capable
[ 143.086] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 143.086] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 143.089] (II) NOUVEAU(0): NVEnterVT is called.
[ 143.098] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
[ 143.098] resize called 1280 1024
[ 143.419] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 143.419] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 143.419] (**) Power Button: Applying InputClass "keyboard"
[ 143.419] (II) LoadModule: "evdev"
[ 143.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.419] (II) Module evdev: vendor="X.Org Foundation"
[ 143.419] compiled for 1.10.0, module version = 2.6.0
[ 143.419] Module class: X.Org XInput Driver
[ 143.419] ABI class: X.Org XInput driver, version 12.2
[ 143.419] (II) Using input driver 'evdev' for 'Power Button'
[ 143.420] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.420] (**) Power Button: always reports core events
[ 143.420] (**) Power Button: Device: "/dev/input/event1"
[ 143.420] (--) Power Button: Found keys
[ 143.420] (II) Power Button: Configuring as keyboard
[ 143.420] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 143.420] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 143.420] (**) Option "xkb_rules" "evdev"
[ 143.420] (**) Option "xkb_model" "evdev"
[ 143.420] (**) Option "xkb_layout" "de"
[ 143.420] (**) Option "xkb_variant" "nodeadkeys"
[ 143.506] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 143.506] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 143.506] (**) Power Button: Applying InputClass "keyboard"
[ 143.506] (II) Using input driver 'evdev' for 'Power Button'
[ 143.506] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.506] (**) Power Button: always reports core events
[ 143.506] (**) Power Button: Device: "/dev/input/event0"
[ 143.506] (--) Power Button: Found keys
[ 143.506] (II) Power Button: Configuring as keyboard
[ 143.506] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 143.506] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 143.506] (**) Option "xkb_rules" "evdev"
[ 143.506] (**) Option "xkb_model" "evdev"
[ 143.506] (**) Option "xkb_layout" "de"
[ 143.506] (**) Option "xkb_variant" "nodeadkeys"
[ 143.510] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event10)
[ 143.510] (II) No input driver/identifier specified (ignoring)
[ 143.510] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event11)
[ 143.510] (II) No input driver/identifier specified (ignoring)
[ 143.511] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event12)
[ 143.511] (II) No input driver/identifier specified (ignoring)
[ 143.512] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event9)
[ 143.512] (II) No input driver/identifier specified (ignoring)
[ 143.522] (II) config/udev: Adding input device Razer Razer Arctosa (/dev/input/event3)
[ 143.522] (**) Razer Razer Arctosa: Applying InputClass "evdev keyboard catchall"
[ 143.522] (**) Razer Razer Arctosa: Applying InputClass "keyboard"
[ 143.522] (II) Using input driver 'evdev' for 'Razer Razer Arctosa'
[ 143.522] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.522] (**) Razer Razer Arctosa: always reports core events
[ 143.522] (**) Razer Razer Arctosa: Device: "/dev/input/event3"
[ 143.522] (--) Razer Razer Arctosa: Found keys
[ 143.522] (II) Razer Razer Arctosa: Configuring as keyboard
[ 143.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3/event3"
[ 143.522] (II) XINPUT: Adding extended input device "Razer Razer Arctosa" (type: KEYBOARD)
[ 143.522] (**) Option "xkb_rules" "evdev"
[ 143.522] (**) Option "xkb_model" "evdev"
[ 143.522] (**) Option "xkb_layout" "de"
[ 143.522] (**) Option "xkb_variant" "nodeadkeys"
[ 143.524] (II) config/udev: Adding input device Razer Razer Arctosa (/dev/input/event4)
[ 143.524] (**) Razer Razer Arctosa: Applying InputClass "evdev keyboard catchall"
[ 143.524] (**) Razer Razer Arctosa: Applying InputClass "keyboard"
[ 143.524] (II) Using input driver 'evdev' for 'Razer Razer Arctosa'
[ 143.524] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.524] (**) Razer Razer Arctosa: always reports core events
[ 143.524] (**) Razer Razer Arctosa: Device: "/dev/input/event4"
[ 143.524] (--) Razer Razer Arctosa: Found 1 mouse buttons
[ 143.524] (--) Razer Razer Arctosa: Found scroll wheel(s)
[ 143.524] (--) Razer Razer Arctosa: Found relative axes
[ 143.524] (--) Razer Razer Arctosa: Found absolute axes
[ 143.524] (--) Razer Razer Arctosa: Found keys
[ 143.524] (II) Razer Razer Arctosa: Configuring as mouse
[ 143.524] (II) Razer Razer Arctosa: Configuring as keyboard
[ 143.524] (II) Razer Razer Arctosa: Adding scrollwheel support
[ 143.525] (**) Razer Razer Arctosa: YAxisMapping: buttons 4 and 5
[ 143.525] (**) Razer Razer Arctosa: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 143.525] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input4/event4"
[ 143.525] (II) XINPUT: Adding extended input device "Razer Razer Arctosa" (type: KEYBOARD)
[ 143.525] (**) Option "xkb_rules" "evdev"
[ 143.525] (**) Option "xkb_model" "evdev"
[ 143.525] (**) Option "xkb_layout" "de"
[ 143.525] (**) Option "xkb_variant" "nodeadkeys"
[ 143.525] (EE) Razer Razer Arctosa: failed to initialize for relative axes.
[ 143.525] (II) Razer Razer Arctosa: initialized for absolute axes.
[ 143.526] (**) Razer Razer Arctosa: (accel) keeping acceleration scheme 1
[ 143.526] (**) Razer Razer Arctosa: (accel) acceleration profile 0
[ 143.526] (**) Razer Razer Arctosa: (accel) acceleration factor: 2.000
[ 143.526] (**) Razer Razer Arctosa: (accel) acceleration threshold: 4
[ 143.527] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event5)
[ 143.527] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 143.527] (II) Using input driver 'evdev' for 'Logitech USB Gaming Mouse'
[ 143.527] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.527] (**) Logitech USB Gaming Mouse: always reports core events
[ 143.527] (**) Logitech USB Gaming Mouse: Device: "/dev/input/event5"
[ 143.528] (--) Logitech USB Gaming Mouse: Found 20 mouse buttons
[ 143.528] (--) Logitech USB Gaming Mouse: Found scroll wheel(s)
[ 143.528] (--) Logitech USB Gaming Mouse: Found relative axes
[ 143.528] (--) Logitech USB Gaming Mouse: Found x and y relative axes
[ 143.528] (II) Logitech USB Gaming Mouse: Configuring as mouse
[ 143.528] (II) Logitech USB Gaming Mouse: Adding scrollwheel support
[ 143.528] (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[ 143.528] (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 143.528] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5/event5"
[ 143.528] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
[ 143.528] (II) Logitech USB Gaming Mouse: initialized for relative axes.
[ 143.528] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
[ 143.528] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[ 143.528] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 143.528] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
[ 143.529] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse0)
[ 143.529] (II) No input driver/identifier specified (ignoring)
[ 143.531] (II) config/udev: Adding input device UVC Camera (046d:09a1) (/dev/input/event7)
[ 143.531] (**) UVC Camera (046d:09a1): Applying InputClass "evdev keyboard catchall"
[ 143.531] (**) UVC Camera (046d:09a1): Applying InputClass "keyboard"
[ 143.531] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a1)'
[ 143.531] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.531] (**) UVC Camera (046d:09a1): always reports core events
[ 143.531] (**) UVC Camera (046d:09a1): Device: "/dev/input/event7"
[ 143.531] (--) UVC Camera (046d:09a1): Found keys
[ 143.531] (II) UVC Camera (046d:09a1): Configuring as keyboard
[ 143.531] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input7/event7"
[ 143.531] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a1)" (type: KEYBOARD)
[ 143.531] (**) Option "xkb_rules" "evdev"
[ 143.531] (**) Option "xkb_model" "evdev"
[ 143.531] (**) Option "xkb_layout" "de"
[ 143.531] (**) Option "xkb_variant" "nodeadkeys"
[ 143.535] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 143.535] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 143.535] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 143.535] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.535] (**) Logitech USB Receiver: always reports core events
[ 143.535] (**) Logitech USB Receiver: Device: "/dev/input/event6"
[ 143.535] (--) Logitech USB Receiver: Found 12 mouse buttons
[ 143.535] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 143.535] (--) Logitech USB Receiver: Found relative axes
[ 143.535] (--) Logitech USB Receiver: Found x and y relative axes
[ 143.535] (II) Logitech USB Receiver: Configuring as mouse
[ 143.535] (II) Logitech USB Receiver: Adding scrollwheel support
[ 143.535] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 143.535] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 143.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0/input/input6/event6"
[ 143.535] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 143.536] (II) Logitech USB Receiver: initialized for relative axes.
[ 143.536] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 143.536] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 143.536] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 143.536] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 143.537] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 143.537] (II) No input driver/identifier specified (ignoring)
[ 143.539] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event8)
[ 143.539] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[ 143.539] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "keyboard"
[ 143.539] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver'
[ 143.539] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 143.539] (**) IR-receiver inside an USB DVB receiver: always reports core events
[ 143.539] (**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event8"
[ 143.539] (--) IR-receiver inside an USB DVB receiver: Found keys
[ 143.539] (II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
[ 143.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/rc/rc0/input8/event8"
[ 143.539] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
[ 143.539] (**) Option "xkb_rules" "evdev"
[ 143.539] (**) Option "xkb_model" "evdev"
[ 143.539] (**) Option "xkb_layout" "de"
[ 143.539] (**) Option "xkb_variant" "nodeadkeys"
[ 143.548] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 143.548] (II) No input driver/identifier specified (ignoring)
Und dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011
[ 0.000000] Command line: root=/dev/sdb2 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfdf0000 - 00000000bfdf3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdf3000 - 00000000bfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA785GM-US2H/GA-MA78LMT-US2H, BIOS F9 08/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f56d0] f56d0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfdf0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfdf0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfdf0000 @ bfded000-bfdf0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 1G
[ 0.000000] kernel direct mapping tables up to 140000000 @ 13ffff000-140000000
[ 0.000000] RAMDISK: 37d60000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7090 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfdf3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfdf3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfdf30c0 074D2 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfdf0000 00040
[ 0.000000] ACPI: SSDT 00000000bfdfa680 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bfdfb000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfdfb040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000bfdfa5c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000013fffb000 - 000000013fffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfdf0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1047935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767528 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfdf0000 - 00000000bfdf3000
[ 0.000000] PM: Registered nosave memory: 00000000bfdf3000 - 00000000bfe00000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s78464 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030010
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sdb2 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fdfe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3989620k/5242880k available (4065k kernel code, 1051140k absent, 202120k reserved, 3303k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.474 MHz processor.
[ 0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.82 BogoMIPS (lpj=10714913)
[ 0.006674] pid_max: default: 32768 minimum: 301
[ 0.006760] Security Framework initialized
[ 0.006764] AppArmor: AppArmor disabled by boot time parameter
[ 0.007033] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008204] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008741] Mount-cache hash table entries: 256
[ 0.009047] Initializing cgroup subsys cpuacct
[ 0.009073] Initializing cgroup subsys memory
[ 0.009087] Initializing cgroup subsys devices
[ 0.009089] Initializing cgroup subsys freezer
[ 0.009090] Initializing cgroup subsys net_cls
[ 0.009092] Initializing cgroup subsys blkio
[ 0.009131] tseg: 00bff00000
[ 0.009133] CPU: Physical Processor ID: 0
[ 0.009134] CPU: Processor Core ID: 0
[ 0.009135] mce: CPU supports 6 MCE banks
[ 0.010423] ACPI: Core revision 20110413
[ 0.013361] ftrace: allocating 16145 entries in 64 pages
[ 0.017195] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052808] CPU0: AMD Phenom(tm) II X2 555 Processor stepping 03
[ 0.053330] Performance Events: AMD PMU driver.
[ 0.053330] ... version: 0
[ 0.053330] ... bit width: 48
[ 0.053330] ... generic registers: 4
[ 0.053330] ... value mask: 0000ffffffffffff
[ 0.053330] ... max period: 00007fffffffffff
[ 0.053330] ... fixed-purpose events: 0
[ 0.053330] ... event mask: 000000000000000f
[ 0.070038] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096684] Booting Node 0, Processors #1
[ 0.096686] smpboot cpu 1: start_ip = 9a000
[ 0.193343] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.200003] Brought up 2 CPUs
[ 0.200005] Total of 2 processors activated (12863.78 BogoMIPS).
[ 0.201402] devtmpfs: initialized
[ 0.201402] PM: Registering ACPI NVS region at bfdf0000 (12288 bytes)
[ 0.203352] print_constraints: dummy:
[ 0.203411] NET: Registered protocol family 16
[ 0.203470] node 0 link 0: io port [c000, ffff]
[ 0.203473] TOM: 00000000c0000000 aka 3072M
[ 0.203474] Fam 10h mmconf [e0000000, e00fffff]
[ 0.203475] node 0 link 0: mmio [a0000, bffff]
[ 0.203477] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.203479] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.203481] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.203483] TOM2: 0000000140000000 aka 5120M
[ 0.203485] bus: [00, 03] on node 0 link 0
[ 0.203486] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.203488] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.203489] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.203490] bus: 00 index 3 [mem 0xe0400000-0xffffffff]
[ 0.203492] bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
[ 0.203493] bus: 00 index 5 [mem 0x140000000-0xfcffffffff]
[ 0.203502] Extended Config Space enabled on 1 nodes
[ 0.203514] ACPI: bus type pci registered
[ 0.203631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.203633] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.220246] PCI: Using configuration type 1 for base access
[ 0.220508] bio: create slab <bio-0> at 0
[ 0.220517] ACPI: EC: Look up EC in DSDT
[ 0.225142] ACPI: Interpreter enabled
[ 0.225145] ACPI: (supports S0 S3 S4 S5)
[ 0.225156] ACPI: Using IOAPIC for interrupt routing
[ 0.284805] ACPI: No dock devices found.
[ 0.284807] HEST: Table not found.
[ 0.284809] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.284847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.284923] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.284925] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.284927] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.284928] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.284930] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.284941] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.284950] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.284977] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.284999] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.285001] pci 0000:00:02.0: PME# disabled
[ 0.285019] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.285039] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.285041] pci 0000:00:0a.0: PME# disabled
[ 0.285064] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.285082] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.285090] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.285099] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.285108] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.285116] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.285125] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.285144] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.285175] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.285187] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.285246] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.285258] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.285322] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.285339] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.285404] pci 0000:00:12.2: supports D1 D2
[ 0.285406] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.285409] pci 0000:00:12.2: PME# disabled
[ 0.285428] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.285440] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.285498] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.285510] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.285574] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.285591] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.285656] pci 0000:00:13.2: supports D1 D2
[ 0.285658] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.285661] pci 0000:00:13.2: PME# disabled
[ 0.285683] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.285768] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.285783] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.285791] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.285800] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.285808] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.285817] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.285862] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.285882] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.285935] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.285939] pci 0000:00:14.2: PME# disabled
[ 0.285951] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.286020] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.286056] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.286069] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.286129] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.286140] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.286149] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.286159] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.286170] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.286212] pci 0000:01:00.0: [10de:0ca3] type 0 class 0x000300
[ 0.286221] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.286230] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.286239] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.286246] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.286252] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.286289] pci 0000:01:00.1: [10de:0be4] type 0 class 0x000403
[ 0.286298] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 0.289999] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.290003] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.290006] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.290009] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.290041] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.290053] pci 0000:02:00.0: reg 10: [io 0xde00-0xdeff]
[ 0.290072] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.290085] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.290093] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.290121] pci 0000:02:00.0: supports D1 D2
[ 0.290122] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.290126] pci 0000:02:00.0: PME# disabled
[ 0.296664] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.296668] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.296670] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.296673] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.296731] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.296735] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.296738] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.296742] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.296744] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.296746] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.296748] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.296750] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.296751] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.296763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.296899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.296933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.296955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.296974] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.296977] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.296978] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.304760] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304812] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304836] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304860] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304883] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304907] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304931] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.304995] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.304997] vgaarb: loaded
[ 0.304998] vgaarb: bridge control possible 0000:01:00.0
[ 0.305052] PCI: Using ACPI for IRQ routing
[ 0.313283] PCI: pci_cache_line_size set to 64 bytes
[ 0.313288] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.313350] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.313351] reserve RAM buffer: 00000000bfdf0000 - 00000000bfffffff
[ 0.313436] NetLabel: Initializing
[ 0.313437] NetLabel: domain hash size = 128
[ 0.313438] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.313446] NetLabel: unlabeled traffic allowed by default
[ 0.313458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.313461] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.315489] Switching to clocksource hpet
[ 0.315491] Switched to NOHz mode on CPU #0
[ 0.315505] Switched to NOHz mode on CPU #1
[ 0.316890] pnp: PnP ACPI init
[ 0.316899] ACPI: bus type pnp registered
[ 0.316950] pnp 00:00: [bus 00-ff]
[ 0.316952] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.316954] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.316955] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.316957] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.316958] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.316960] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.316985] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.316991] pnp 00:01: [io 0x0010-0x001f]
[ 0.316992] pnp 00:01: [io 0x0022-0x003f]
[ 0.316994] pnp 00:01: [io 0x0044-0x005f]
[ 0.316995] pnp 00:01: [io 0x0062-0x0063]
[ 0.316996] pnp 00:01: [io 0x0065-0x006f]
[ 0.316997] pnp 00:01: [io 0x0074-0x007f]
[ 0.316999] pnp 00:01: [io 0x0091-0x0093]
[ 0.317000] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.317001] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.317002] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.317005] pnp 00:01: [io 0x0220-0x0225]
[ 0.317006] pnp 00:01: [io 0x0290-0x0294]
[ 0.317036] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.317038] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.317040] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.317042] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.506739] pnp 00:02: [io 0x4100-0x411f]
[ 0.506741] pnp 00:02: [io 0x0228-0x022f]
[ 0.506743] pnp 00:02: [io 0x040b]
[ 0.506744] pnp 00:02: [io 0x04d6]
[ 0.506745] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.506746] pnp 00:02: [io 0x0c14]
[ 0.506747] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.506748] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.506749] pnp 00:02: [io 0x0c6f]
[ 0.506750] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.506751] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.506753] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.506754] pnp 00:02: [io 0x4000-0x40fe]
[ 0.506755] pnp 00:02: [io 0x4210-0x4217]
[ 0.506756] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.506757] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.506758] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.506760] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.506761] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.506765] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.506784] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.506788] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.506816] system 00:02: [io 0x4100-0x411f] has been reserved
[ 0.506818] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.506819] system 00:02: [io 0x040b] has been reserved
[ 0.506821] system 00:02: [io 0x04d6] has been reserved
[ 0.506822] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.506824] system 00:02: [io 0x0c14] has been reserved
[ 0.506825] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.506827] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.506828] system 00:02: [io 0x0c6f] has been reserved
[ 0.506830] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.506831] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.506833] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.506835] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 0.506836] system 00:02: [io 0x4210-0x4217] has been reserved
[ 0.506838] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.506839] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.506841] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.506843] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.506845] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.506907] pnp 00:03: [dma 4]
[ 0.506908] pnp 00:03: [io 0x0000-0x000f]
[ 0.506910] pnp 00:03: [io 0x0080-0x0090]
[ 0.506911] pnp 00:03: [io 0x0094-0x009f]
[ 0.506912] pnp 00:03: [io 0x00c0-0x00df]
[ 0.506928] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.506956] pnp 00:04: [irq 0 disabled]
[ 0.506965] pnp 00:04: [irq 8]
[ 0.506967] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.506984] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.507002] pnp 00:05: [io 0x0070-0x0073]
[ 0.507019] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.507023] pnp 00:06: [io 0x0061]
[ 0.507039] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.507044] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.507051] pnp 00:07: [irq 13]
[ 0.507067] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.507247] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.507253] pnp 00:08: [irq 4]
[ 0.507289] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.507412] pnp 00:09: [io 0x0378-0x037f]
[ 0.507418] pnp 00:09: [irq 7]
[ 0.507447] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.507518] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.507549] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.507551] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507639] pnp 00:0b: [mem 0x000cd600-0x000cffff]
[ 0.507640] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.507641] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.507643] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.507644] pnp 00:0b: [mem 0xbfdf0000-0xbfdfffff]
[ 0.507645] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 0.507647] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.507648] pnp 00:0b: [mem 0x00100000-0xbfdeffff]
[ 0.507649] pnp 00:0b: [mem 0xbfe00000-0xbfefffff]
[ 0.507650] pnp 00:0b: [mem 0xbff00000-0xbfffffff]
[ 0.507652] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.507653] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.507655] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.507656] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
[ 0.507659] pnp 00:0b: disabling [mem 0x000cd600-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507661] pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507664] pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507666] pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507669] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507671] pnp 00:0b: disabling [mem 0x00100000-0xbfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.507709] system 00:0b: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
[ 0.507710] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.507712] system 00:0b: [mem 0xbfe00000-0xbfefffff] has been reserved
[ 0.507714] system 00:0b: [mem 0xbff00000-0xbfffffff] could not be reserved
[ 0.507716] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.507718] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.507720] system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.507722] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.507734] pnp: PnP ACPI: found 12 devices
[ 0.507735] ACPI: ACPI bus type pnp unregistered
[ 0.513217] PCI: max bus depth: 1 pci_try_num: 2
[ 0.513231] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref]
[ 0.513233] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.513235] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.513238] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.513240] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.513243] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 0.513245] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.513247] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.513249] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.513251] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.513254] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.513256] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.513260] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.513264] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff pref]
[ 0.513279] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.513281] pci 0000:00:02.0: setting latency timer to 64
[ 0.513285] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.513287] pci 0000:00:0a.0: setting latency timer to 64
[ 0.513293] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.513294] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.513296] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.513297] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.513299] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff]
[ 0.513300] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.513302] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.513304] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.513305] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.513307] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.513308] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.513310] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.513311] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.513313] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
[ 0.513314] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.513316] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.513317] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.513319] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.513320] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfebfffff]
[ 0.513388] NET: Registered protocol family 2
[ 0.513522] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.514318] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.516479] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.516770] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.516772] TCP reno registered
[ 0.516779] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.516804] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.517024] NET: Registered protocol family 1
[ 0.583390] pci 0000:01:00.0: Boot video device
[ 0.583403] PCI: CLS 64 bytes, default 64
[ 0.583444] Unpacking initramfs...
[ 0.607335] Freeing initrd memory: 2624k freed
[ 0.608647] PCI-DMA: Disabling AGP.
[ 0.611020] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.611021] PCI-DMA: using GART IOMMU.
[ 0.611023] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.614142] audit: initializing netlink socket (disabled)
[ 0.614150] type=2000 audit(1315035120.613:1): initialized
[ 0.621933] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.638009] VFS: Disk quotas dquot_6.5.2
[ 0.638117] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.638236] msgmni has been set to 7926
[ 0.638445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.638483] io scheduler noop registered
[ 0.638485] io scheduler deadline registered
[ 0.638536] io scheduler cfq registered (default)
[ 0.638636] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.638657] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.638722] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.638738] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.638846] ERST: Table is not found!
[ 0.638900] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.659499] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.780676] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.820165] Linux agpgart interface v0.103
[ 0.820204] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.853141] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.853142] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.100133] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.100203] mousedev: PS/2 mouse device common for all mice
[ 1.100251] rtc_cmos 00:05: RTC can wake from S4
[ 1.100331] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.100361] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.100367] cpuidle: using governor ladder
[ 1.100368] cpuidle: using governor menu
[ 1.100505] TCP cubic registered
[ 1.100507] NET: Registered protocol family 17
[ 1.100512] Registering the dns_resolver key type
[ 1.100572] PM: Hibernation image not present or could not be loaded.
[ 1.100575] registered taskstats version 1
[ 1.108262] rtc_cmos 00:05: setting system clock to 2011-09-03 07:32:01 UTC (1315035121)
[ 1.108290] Initializing network drop monitor service
[ 1.109175] Freeing unused kernel memory: 712k freed
[ 1.109303] Write protecting the kernel read-only data: 6144k
[ 1.109405] Freeing unused kernel memory: 12k freed
[ 1.111274] Freeing unused kernel memory: 776k freed
[ 1.118858] udevd[74]: starting version 173
[ 1.119915] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.119919] ACPI: Power Button [PWRB]
[ 1.119962] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.119964] ACPI: Power Button [PWRF]
[ 1.120619] wmi: Mapper loaded
[ 1.124686] [drm] Initialized drm 1.1.0 20060810
[ 1.134131] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.134135] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.134924] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a3180a2)
[ 1.137101] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.217942] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.217944] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.217946] [drm] nouveau 0000:01:00.0: Bios version 70.15.23.00
[ 1.217947] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[ 1.217994] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 1.217995] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 1.217997] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
[ 1.217999] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
[ 1.218000] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01032310 00000000
[ 1.218002] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02021362 00020010
[ 1.218004] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 1.218006] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 1.218007] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
[ 1.218009] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff
[ 1.218012] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC72F
[ 1.258102] [drm] nouveau 0000:01:00.0: 0xCA91: Condition still not met after 20ms, skipping following opcodes
[ 1.278107] [drm] nouveau 0000:01:00.0: 0xCA95: Condition still not met after 20ms, skipping following opcodes
[ 1.278126] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCCA6
[ 1.285885] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDBF4
[ 1.285890] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDC32
[ 1.328434] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDE38
[ 1.328436] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDE9D
[ 1.348437] [drm] nouveau 0000:01:00.0: 0xDE9D: Condition still not met after 20ms, skipping following opcodes
[ 1.616713] Refined TSC clocksource calibration: 3214.524 MHz.
[ 1.616717] Switching to clocksource tsc
[ 1.746709] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 1.746712] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 900mV timing 2
[ 1.746715] [drm] nouveau 0000:01:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 900mV timing 1
[ 1.746717] [drm] nouveau 0000:01:00.0: 3: memory 790MHz core 550MHz shader 1340MHz voltage 1000mV timing 0
[ 1.746734] [drm] nouveau 0000:01:00.0: c: memory 270MHz core 405MHz shader 810MHz voltage 900mV
[ 1.746784] [TTM] Zone kernel: Available graphics memory: 2029848 kiB.
[ 1.746785] [TTM] Initializing pool allocator.
[ 1.746799] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[ 1.748858] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.762391] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.762392] [drm] No driver support for vblank timestamp query.
[ 1.927098] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40000000, bo ffff880137ab7800
[ 1.927143] fbcon: nouveaufb (fb0) is primary device
[ 1.968821] Console: switching to colour frame buffer device 160x64
[ 1.970445] fb0: nouveaufb frame buffer device
[ 1.970447] drm: registered panic notifier
[ 1.970451] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.985435] SCSI subsystem initialized
[ 1.989541] usbcore: registered new interface driver usbfs
[ 1.989558] usbcore: registered new interface driver hub
[ 1.991236] libata version 3.00 loaded.
[ 1.992021] ahci 0000:00:11.0: version 3.0
[ 1.992040] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.992144] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.992147] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.993711] scsi0 : ahci
[ 1.993827] scsi1 : ahci
[ 1.994235] scsi2 : ahci
[ 1.994855] scsi3 : ahci
[ 1.994954] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 1.994957] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 1.994960] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 1.994963] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 1.995387] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.996065] scsi4 : pata_atiixp
[ 1.996175] scsi5 : pata_atiixp
[ 1.996525] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.996527] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.003251] usbcore: registered new device driver usb
[ 2.018863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.018943] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.018968] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.019000] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.019009] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.019033] ehci_hcd 0000:00:12.2: debug port 1
[ 2.019057] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 2.026730] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.026826] hub 1-0:1.0: USB hub found
[ 2.026829] hub 1-0:1.0: 6 ports detected
[ 2.026921] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.026933] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.026940] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.026946] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.026964] ehci_hcd 0000:00:13.2: debug port 1
[ 2.026985] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 2.036690] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.036768] hub 2-0:1.0: USB hub found
[ 2.036770] hub 2-0:1.0: 6 ports detected
[ 2.091787] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.095179] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.095199] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.095208] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.095235] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 2.150825] hub 3-0:1.0: USB hub found
[ 2.150830] hub 3-0:1.0: 3 ports detected
[ 2.154255] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.154268] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.154277] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.154294] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 2.173795] ata5.00: ATAPI: PHILIPS DROM6216, DD08, max UDMA/33
[ 2.173799] ata5.01: ATAPI: _NEC DVD_RW ND-4550A, 1.85, max UDMA/33
[ 2.187063] ata5.00: configured for UDMA/33
[ 2.200430] ata5.01: configured for UDMA/33
[ 2.210778] hub 4-0:1.0: USB hub found
[ 2.210783] hub 4-0:1.0: 3 ports detected
[ 2.210859] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.210872] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.210879] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.210892] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 2.267451] hub 5-0:1.0: USB hub found
[ 2.267456] hub 5-0:1.0: 3 ports detected
[ 2.267536] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.267548] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.267555] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.267568] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 2.313368] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.313429] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.324114] hub 6-0:1.0: USB hub found
[ 2.324120] hub 6-0:1.0: 3 ports detected
[ 2.324196] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.324210] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.324217] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.324229] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 2.333360] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.380777] hub 7-0:1.0: USB hub found
[ 2.380782] hub 7-0:1.0: 2 ports detected
[ 2.480035] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.480057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.481111] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 2.481113] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.482334] ata1.00: configured for UDMA/133
[ 2.482479] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 2.527747] ata3.00: ATA-7: ST3250824AS, 3.AAE, max UDMA/133
[ 2.527749] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.586052] ata3.00: configured for UDMA/133
[ 2.586168] scsi 2:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5
[ 2.587298] scsi 4:0:0:0: CD-ROM PHILIPS DROM6216 DD08 PQ: 0 ANSI: 5
[ 2.588609] scsi 4:0:1:0: CD-ROM _NEC DVD_RW ND-4550A 1.85 PQ: 0 ANSI: 5
[ 2.595932] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.595938] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.595964] sd 0:0:0:0: [sda] Write Protect is off
[ 2.595966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.595967] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.595970] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.595978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.595981] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.597128] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
[ 2.597130] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.597298] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.600089] sr1: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.600268] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 2.631294] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 2.631535] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.634084] sdb: sdb1 sdb2 sdb3
[ 2.634242] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.676695] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 2.802055] hub 1-4:1.0: USB hub found
[ 2.802405] hub 1-4:1.0: 4 ports detected
[ 3.096443] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.266695] usb 4-2: new full speed USB device number 2 using ohci_hcd
[ 3.676696] usb 4-3: new full speed USB device number 3 using ohci_hcd
[ 3.910600] usb 1-4.1: new low speed USB device number 6 using ehci_hcd
[ 4.067329] usb 1-4.2: new high speed USB device number 7 using ehci_hcd
[ 4.223695] usb 1-4.4: new high speed USB device number 8 using ehci_hcd
[ 4.308577] hub 1-4.4:1.0: USB hub found
[ 4.308807] hub 1-4.4:1.0: 4 ports detected
[ 4.327550] udevd[323]: starting version 173
[ 4.616855] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.617217] ACPI: acpi_idle registered with cpuidle
[ 4.684493] MCE: In-kernel MCE decoding enabled.
[ 4.696631] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.738344] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.805972] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.805975] hda_intel: Disabling MSI
[ 4.806002] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 4.880650] EDAC MC: Ver: 2.1.0
[ 4.895256] IR NEC protocol handler initialized
[ 4.912091] IR RC5(x) protocol handler initialized
[ 4.915601] IR RC6 protocol handler initialized
[ 4.923429] Linux media interface: v0.10
[ 4.932575] powernow-k8: Found 1 AMD Phenom(tm) II X2 555 Processor (2 cpu cores) (version 2.20.00)
[ 4.932602] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 4.932604] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 4.932605] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 4.932606] powernow-k8: 3 : pstate 3 (800 MHz)
[ 4.933001] IT8718 SuperIO detected.
[ 4.933330] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.933400] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.935577] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.935624] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.962028] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
[ 4.962087] generic-usb 0003:1532:010B.0001: input,hidraw0: USB HID v1.10 Keyboard [Razer Razer Arctosa] on usb-0000:00:12.1-2/input0
[ 4.962970] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.963005] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 4.963028] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 4.963049] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 4.969963] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input4
[ 4.970030] generic-usb 0003:1532:010B.0002: input,hidraw1: USB HID v1.10 Device [Razer Razer Arctosa] on usb-0000:00:12.1-2/input1
[ 4.974784] IR JVC protocol handler initialized
[ 4.974882] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input5
[ 4.974982] generic-usb 0003:046D:C049.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.1-3/input0
[ 4.980979] generic-usb 0003:046D:C049.0004: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.1-3/input1
[ 4.985032] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0/input/input6
[ 4.985120] generic-usb 0003:046D:C508.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-4.1/input0
[ 4.987538] IR Sony protocol handler initialized
[ 4.991237] lirc_dev: IR Remote Control driver registered, major 250
[ 4.993943] Linux video capture interface: v2.00
[ 4.994416] IR LIRC bridge handler initialized
[ 5.016648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.016663] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.016728] r8169 0000:02:00.0: setting latency timer to 64
[ 5.016765] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 5.016910] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90011186000, 6c:f0:49:1a:a8:53, XID 083000c0 IRQ 42
[ 5.024070] ppdev: user-space parallel port driver
[ 5.026887] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
[ 5.026914] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5.027283] DVB: registering new adapter (TerraTec Cinergy T Stick RC)
[ 5.028676] AMD64 EDAC driver v3.4.0
[ 5.028780] EDAC amd64: DRAM ECC disabled.
[ 5.028785] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.028786] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 5.028787] (Note that use of the override may cause unknown side effects.)
[ 5.047126] usbcore: registered new interface driver snd-usb-audio
[ 5.065027] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 5.079079] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input7
[ 5.079168] usbcore: registered new interface driver uvcvideo
[ 5.079169] USB Video Class driver (v1.1.0)
[ 5.176627] af9013: firmware version:5.1.0.0
[ 5.180378] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
[ 5.209012] tda18218: NXP TDA18218HN successfully identified.
[ 5.346682] Registered IR keymap rc-terratec-slim-2
[ 5.346734] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/rc/rc0/input8
[ 5.346799] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.2/rc/rc0
[ 5.346801] dvb-usb: schedule remote query interval to 500 msecs.
[ 5.346803] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
[ 5.352657] usbcore: registered new interface driver dvb_usb_af9015
[ 5.352663] usbcore: registered new interface driver usbhid
[ 5.352665] usbhid: USB HID core driver
[ 5.363359] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.436687] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.510018] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.586676] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.693501] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 5.693547] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 5.693587] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 5.693629] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 6.543026] EXT4-fs (sdb2): re-mounted. Opts: (null)
[ 6.687615] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 6.798554] Adding 4194300k swap on /dev/sdb1. Priority:-1 extents:1 across:4194300k
[ 8.264831] r8169 0000:02:00.0: eth0: link down
[ 8.264839] r8169 0000:02:00.0: eth0: link down
[ 9.952251] r8169 0000:02:00.0: eth0: link up
[ 40.029617] fuse init (API version 7.16)
[ 42.016976] EXT4-fs (sdb2): re-mounted. Opts: commit=0
[ 42.219289] EXT4-fs (sdb3): re-mounted. Opts: commit=0
[ 154.876268] NET: Registered protocol family 10
[ 165.603345] eth0: no IPv6 routers present
EDIT 3: Ich habe jetzt zum testen Ubuntu und openSuse installiert aber bei den beiden Distris tritt das selbe Problem auf. Ich fahre ein Dualboot, Windows und Linux sind jedoch auf 2 getrennten Platten installiert. Die Grafikkarte schliess ich erstmal aus, das Win bis jetzt keine Probleme macht.