Hi,
seid geraumer Zeit (bin sogar fast der Meinung seid dem letzten Kernel update) habe ich folgendes Problem:
Ich habe 3 HDDs via SATA im Rechner:
*Maxtor STM3250310AS: 250GB an Port1
*Samsung HD501LJ: 500GB an Port2
*Samsung HD502IJ: 500GB an Port3
*Am Port4 hängt ein ASUS-DRW-2014L1T
*Keine IDE-Geräte
Seid ein paar Tagen freezed mein System, aber richtig 😉 .. Kein SSH-Zugriff mehr, selbst die Magic_Keys gehen nicht mehr.
Es ist auch egal was ich mache, und auf welcher HDD.
Zb. gerade hab ich K3B gestartet, Freezed, davor, Zugriff via NFS -> Freezed. Der erste Freezed kam, als das Platten-LVM <40gb freien Speicherplatz hatte, seid dem Kontinuirlich. Hab inzwischen auch Daten gelöscht gehabt, brachte aber kein Erfolg (um auf >40gb zu kommen), machnmal passiert es im Leerlauf.
Gelegentlich (so 1 von 20 Freezed) fängt er sich wieder, dann sagt dmesg folgendes:
ata4.00: exception Emask 0x10 SAct 0x1 SErr 0x1850000 action 0xa frozen
ata4.00: ADMA status 0x00001546: , hotplug
ata4: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns }
ata4.00: cmd 61/48:00:5f:df:00/00:00:00:00:00/40 tag 0 ncq 36864 out
res 40/00:00:5f:df:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4: timeout waiting for ADMA IDLE, stat=0x440
ata4.00: exception Emask 0x10 SAct 0x3 SErr 0x1850000 action 0xa frozen
ata4.00: ADMA status 0x00001446: , hotplug
ata4: SError: { PHYRdyChg CommWake LinkSeq TrStaTrns }
ata4.00: cmd 61/18:00:a7:e8:00/00:00:00:00:00/40 tag 0 ncq 12288 out
res 40/00:0c:bf:e8:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4.00: cmd 61/38:08:bf:e8:00/00:00:00:00:00/40 tag 1 ncq 28672 out
res 40/00:0c:bf:e8:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4.00: disabled
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
sd 3:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 3:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 e8 bf
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 59559
Buffer I/O error on device dm-1, logical block 6884
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6885
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6886
lost page write due to I/O error on dm-1
sd 3:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 3:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 e8 bf
sd 3:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 59583
Buffer I/O error on device dm-1, logical block 6887
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6888
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6889
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6890
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6891
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6892
lost page write due to I/O error on dm-1
Buffer I/O error on device dm-1, logical block 6893
lost page write due to I/O error on dm-1
REISERFS: abort (device dm-1): Journal write error in flush_commit_list
REISERFS: Aborting journal for filesystem on dm-1
ata4: EH complete
ata4.00: detaching (SCSI 3:0:0:0)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 3:0:0:0: [sdb] Stopping disk
sd 3:0:0:0: [sdb] START_STOP FAILED
sd 3:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: COMRESET failed (errno=-32)
ata4: reset failed (errno=-32), retrying in 8 secs
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-32)
ata4: reset failed (errno=-32), retrying in 8 secs
ata4: hard resetting link
ata4: COMRESET failed (errno=-32)
ata4: reset failed (errno=-32), retrying in 33 secs
ata3: exception Emask 0x10 SAct 0x0 SErr 0x1990000 action 0xa frozen
ata3: ADMA status 0x00000502: , hot unplug
ata3: SError: { PHYRdyChg 10B8B Dispar LinkSeq TrStaTrns }
ata3: hard resetting link
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t4
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t3
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t2
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: exception Emask 0x10 SAct 0x0 SErr 0x1950000 action 0xa frozen t1
ata4: SError: { PHYRdyChg CommWake Dispar LinkSeq TrStaTrns }
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: hard resetting link
ata4: port is slow to respond, please be patient (Status 0x80)
ata4: COMRESET failed (errno=-16)
ata4: limiting SATA link speed to 1.5 Gbps
ata4: hard resetting link
ata4: COMRESET failed (errno=-16)
ata4: reset failed, giving up
ata4: EH pending after 5 tries, giving up
ata4: EH complete
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
hub 2-0:1.0: unable to enumerate USB device on port 3
usb 1-3: new full speed USB device using ohci_hcd and address 58
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.1: new low speed USB device using ohci_hcd and address 59
usb 1-3.1: configuration #1 chosen from 1 choice
input: Saitek Saitek R220 as /class/input/input21
input,hidraw1: USB HID v1.00 Joystick [Saitek Saitek R220] on usb-0000:00:02.0-3.1
usb 1-3.4: new low speed USB device using ohci_hcd and address 60
usb 1-3.4: configuration #1 chosen from 1 choice
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
drivers/hid/usbhid/hid-core.c: timeout initializing reports
hiddev0hidraw2: USB HID v1.00 Device [COMPAQ P1210 USB Monitor ] on usb-0000:00:02.0-3.4
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
ReiserFS: dm-1: warning: zam-7001: io error in reiserfs_find_entry
Nun habe ich schon google-Kontaktiert und dies sagte mir in Form einige Foren, es könnte am Kabel, am NCQ oder am Kernel liegen. Das Kabel hab ich logischerweise schon gewechselt, Aber keine Besserung.
Ans NCQ will ich mich nich ranwagen, da ich Angst habe, das ggf. dadurch ein Datenverlust entstehen könnte.
Kernel Downgrade kommt morgen. (Von Testing auf Stock)
Die Temperatur hält sich auch immer im folgenden Rahmen:
Es hängen halt 2 x 12x12cm lüfter vor den Platten
[00:25:28] <root@mimas> ~ ((Linux 2.6.25-ARCH))
0 processes #1 $ hddtemp /dev/sda
/dev/sda: MAXTOR STM3250310AS: 38°C
[00:25:31] <root@mimas> ~ ((Linux 2.6.25-ARCH))
0 processes #2 $ hddtemp /dev/sdb
/dev/sdb: SAMSUNG HD501LJ: 35°C
[00:25:32] <root@mimas> ~ ((Linux 2.6.25-ARCH))
0 processes #3 $ hddtemp /dev/sdc
/dev/sdc: SAMSUNG HD502IJ: 29°C
[00:25:32] <root@mimas> ~ ((Linux 2.6.25-ARCH))
0 processes #4 $
hdpar -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: MAXTOR STM3250310AS
Serial Number: 6RY3Q16G
Firmware Revision: 3.AAC
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 208, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
hdpar -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: SAMSUNG HD501LJ
Serial Number: S0MUJDWQ317130
Firmware Revision: CR100-12
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Used: ATA-8-ACS revision 3b
Supported: 8 7 6 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
168min for SECURITY ERASE UNIT. 168min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000f00db317130
NAA : 5
IEEE OUI : f0
Unique ID : 0db317130
Checksum: correct
hdpar -I /dev/sdc
/dev/sdc:
ATA device, with non-removable media
Model Number: SAMSUNG HD502IJ
Serial Number: S13TJ1EQ304273
Firmware Revision: 1AA01109
Standards:
Used: ATA-8-ACS revision 3b
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: disabled
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Media Card Pass-Through
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* unknown 76[12]
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
Security:
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
108min for SECURITY ERASE UNIT. 108min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000f00b032437
NAA : 5
IEEE OUI : f0
Unique ID : 0b032437
Checksum: correct
Nun kommen noch die Partitionen:
/dev/sda1 * 1 1912 15358108+ 7 HPFS/NTFS
/dev/sda2 1913 3371 11719417+ 83 Linux
/dev/sda3 3372 24404 168947572+ 8e Linux LVM
/dev/sda4 24405 30401 48170902+ 5 Erweiterte
/dev/sda5 24405 24665 2096451 83 Linux
/dev/sda6 24666 29528 39062016 7 HPFS/NTFS
/dev/sda7 29529 30401 7012341 83 Linux
/dev/sdb1 1 60801 488384001 8e Linux LVM
/dev/sdc1 1 60801 488384001 8e Linux LVM
LVM-Info:
PV /dev/sdb1 VG daten lvm2 [465,76 GB / 0 free]
PV /dev/sda3 VG daten lvm2 [161,12 GB / 0 free]
PV /dev/sdc1 VG daten lvm2 [465,76 GB / 0 free]
Total: 3 [1,07 TB] / in use: 3 [1,07 TB] / in no VG: 0 [0 ]
Infos zum Board + Controller:
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
werden mit dem sata_nv betrieben. Das Board ist ein DFI Infitini-Nforce4Ultra
Sollten noch irgendwelche Infos fehlen, reich ich die später noch ein 😉
Bin für jede Idee dankbar 🙂 Auf dauer ist das so kein Zustand 😉 Und bevor ich zb an NCQ gehe, möchte ich mir halt sicher sein, das es das auch def. ist.
Danke und Grüßle