Hallo zusammen,
hoffentlich habe ich für meinen ersten Beitrag das richtige Unterforum gewählt...
Ich besitze ein MSI M670 Notebook mit AMD64 Athlon X2 Prozessor, dessen Frequenz sich über das Gnome CPU Frequency Scaling Applet wunderbar steuern lässt. Zur Regelung wurde cpufrequtils installiert.
Die Anpassung der Taktfrequenz ist allerdings nur im Netzbetrieb möglich, läuft das Laptop im Batteriebetrieb, ist kein anderer Wert als 800MHz einstellbar.
Beim Start lade ich folgende Module und Daemons:
Module in der rc.conf:
MODULES=(powernow-k8 cpufreq_ondemand cpufreq_userspace forcedeth eeprom_93cx6 rt2x00lib rt2x00pci rt61pci snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
Daemons in der rc.conf:
DAEMONS=(@syslog-ng !network netfs dhcdbd networkmanager crond acpid cpufreq @hal @fam @gdm)
Dem Prozessor stehen mit PowerNow-K8 drei Stufen zur Verfügung, diese lassen sich über das Gnome Applet im Netzbetrieb steuern:
[marv@arch ~]$ dmesg | grep powernow
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor TK-53 processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x9 (1700 MHz), vid 0x13
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a
cpufreq-info #im Netzbetrieb mit Performance Governor:
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to linux@brodo.de, please.
analyzing CPU 0:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.70 GHz
available frequency steps: 1.70 GHz, 1.60 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 1.70 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.70 GHz.
analyzing CPU 1:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.70 GHz
available frequency steps: 1.70 GHz, 1.60 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 1.70 GHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 1.70 GHz.
cpufreq-info #im Batteriebetrieb mit Performance Governor:
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to linux@brodo.de, please.
analyzing CPU 0:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.70 GHz
available frequency steps: 1.70 GHz, 1.60 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 800 MHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
analyzing CPU 1:
driver: powernow-k8
CPUs which need to switch frequency at the same time: 0 1
hardware limits: 800 MHz - 1.70 GHz
available frequency steps: 1.70 GHz, 1.60 GHz, 800 MHz
available cpufreq governors: ondemand, performance
current policy: frequency should be within 800 MHz and 800 MHz.
The governor "performance" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
Wie man unter "current policy" sehen kann, erlaubt er mir nur Werte zwischen 800 und 800 MHz. Google und Forensuche wurden erfolglos bemüht, ich vermute das problem sitzt vor dem Rechner...
Für Hilfe wäre ich sehr dankbar.