Mein HP Deskjet wird von CUPS erkannt, aber als Scanner leider nicht. Als root habe ich Folgendes eingegeben:
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found possible USB scanner (vendor=0x03f0 [HP], product=0xa011 [Deskjet 3050A J611 series]) at libusb:003:002
found possible USB scanner (vendor=0x0b05 [AsusTek Computer Inc.], product=0x19af [AURA LED Controller]) at libusb:001:005
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# scanimage -L
device `hpaio:/usb/Deskjet_3050A_J611_series?serial=xxxxx' is a Hewlett-Packard Deskjet_3050A_J611_series all-in-one
Als User bekomme ich folgende Meldung:
$ scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Wie mache ich weiter?
EDIT: wie kriege ich die große Schrift hier wieder in Normalgröße?