Arch Linux

Kodi mit Intel N95 & UHD-Grafik bei 4096 x 2160 nur maximal 24hz

J4son

Hallo zusammen,

ich habe mir einen neuen Mini-PC mit einer Intel N95 CPU geleistet. Dieser soll als Mediaplayer mit Kodi im "Standalone-Mode" dienen.

Leider habe ich das Problem dass mir in Kodi bei einer Auflösung von 4096x2160p nur eine maximale Bildwiederholungsrate von 24hz angeboten wird.

Laut den Spezifikation zum Prozessor soll die integrierte Grafikkarte jedoch 60hz packen.

Hier die Infos zum System:

Output von lspci:

[root@archmedia ~]# lspci 00:00.0 Host bridge: Intel Corporation Device 4618 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-N [UHD Graphics] 00:14.0 USB controller: Intel Corporation Device 54ed 00:14.2 RAM memory: Intel Corporation Device 54ef 00:16.0 Communication controller: Intel Corporation Device 54e0 00:17.0 SATA controller: Intel Corporation Device 54d3 00:1a.0 SD Host controller: Intel Corporation Device 54c4 00:1c.0 PCI bridge: Intel Corporation Device 54be 00:1d.0 PCI bridge: Intel Corporation Device 54b0 00:1f.0 ISA bridge: Intel Corporation Device 5482 00:1f.3 Audio device: Intel Corporation Device 54c8 00:1f.4 SMBus: Intel Corporation Device 54a3 00:1f.5 Serial bus controller: Intel Corporation Device 54a4 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8821CE 802.11ac PCIe Wireless Network Adapter

dmesg-Output vom i915 Modul

[root@archmedia ~]# dmesg | grep i9 [ 1.419362] i915 0000:00:02.0: vgaarb: deactivate vga console [ 1.419453] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 1.420155] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.423281] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) [ 1.472175] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1 [ 1.472181] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 [ 1.476655] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads [ 1.476973] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled [ 1.476974] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled [ 1.477322] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled [ 1.478066] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized [ 1.522973] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 1 [ 2.626839] fbcon: i915drmfb (fb0) is primary device [ 2.626845] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 6.358912] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 7.889621] i915 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.

X11-Config

[root@archmedia ~]# cat /etc/X11/xorg.conf.d/20-intel.conf Section "Device" Identifier "Intel Graphics" Driver "intel" Option "DRI" "iris" # DRI3 is now default Option "AccelMethod" "sna" # default Option "AccelMethod" "uxa" # fallback EndSection
Versucht habe ich es hier auch schon mit dem "modesetting" Treiber...jedoch hat das auch nichts gebracht.

Modul Konfig:

[root@archmedia ~]# cat /etc/modprobe.d/i915.conf options i915 enable_guc=3

Kernel:

[root@archmedia ~]# uname -a Linux archmedia 6.5.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 06 Sep 2023 21:01:01 +0000 x86_64 GNU/Linux

Hat von euch noch jemand eine Idee woran es liegen kann?

krisz

J4son Hat von euch noch jemand eine Idee woran es liegen kann?

Die CPU unterstützt HDMI 2.1, aber steht das auch so in der Spezifikation des PC-Herstellers? Und verwendest du auch ein geeignetes HDMI-Kabel (laut Wikipedia sollte es HDMI Premium High Speed oder Ultra High Speed sein)?
Du könntest mal versuchen, ob 3840x2160 mit 60Hz läuft. Wenn der Bildschirm/Fernseher ein Seitenverhältnis von 16:9 hat, wäre das sowieso die bevorzugte Auflösung.

Greg

Du könntest noch zur Vervollständigung die
/home/duda/.local/share/xorg/Xorg.0.log
posten.
Was passiert denn wenn du die 20-intel.conf weglässt?
Eigentlich sollte das alles automatisch gehen.
Was genau für ein Monitor ist dran? Der sollte das auch packen.
Normalerweise ließt Xorg den Monitor aus und stellt die GPU darauf ein.

J4son

Gerne, hier ist auch noch der Log:

[     5.719] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[     5.719] Current Operating System: Linux archmedia 6.5.2-arch1-1 #1 SMP PREEMPT_DYNAMIC Wed, 06 Sep 2023 21:01:01 +0000 x86_64
[     5.719] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root="LABEL=root" rw audit=0 r8168.aspm=0 r8168.eee_enable=0 pcie_aspm=off loglevel=3 quiet
[     5.719]  
[     5.719] Current version of pixman: 0.42.2
[     5.719]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     5.719] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.719] (==) Log file: "/var/lib/kodi/.local/share/xorg/Xorg.0.log", Time: Wed Sep 13 12:22:53 2023
[     5.721] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.722] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.722] (==) No Layout section.  Using the first Screen section.
[     5.722] (==) No screen section available. Using defaults.
[     5.722] (**) |-->Screen "Default Screen Section" (0)
[     5.722] (**) |   |-->Monitor "<default monitor>"
[     5.723] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[     5.723] (**) |   |-->Device "Intel Graphics"
[     5.723] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     5.723] (==) Automatically adding devices
[     5.723] (==) Automatically enabling devices
[     5.723] (==) Automatically adding GPU devices
[     5.723] (==) Automatically binding GPU devices
[     5.723] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.724] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.724]    Entry deleted from font path.
[     5.724] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     5.724]    Entry deleted from font path.
[     5.724] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     5.724]    Entry deleted from font path.
[     5.724] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.724]    Entry deleted from font path.
[     5.728] (==) FontPath set to:
        /usr/share/fonts/100dpi,
        /usr/share/fonts/75dpi
[     5.728] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.728] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.728] (II) Module ABI versions:
[     5.728]    X.Org ANSI C Emulation: 0.4
[     5.728]    X.Org Video Driver: 25.2
[     5.728]    X.Org XInput driver : 24.4
[     5.728]    X.Org Server Extension : 10.0
[     5.730] (++) using VT number 1

[     5.730] (--) controlling tty is VT number 1, auto-enabling KeepTty
[     5.732] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[     5.733] (II) xfree86: Adding drm device (/dev/dri/card1)
[     5.733] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[     5.734] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 13 paused 0
[     5.736] (--) PCI:*(0@0:2:0) 8086:46d2:8086:7270 rev 0, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     5.736] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.736] (II) LoadModule: "glx"
[     5.738] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.745] (II) Module glx: vendor="X.Org Foundation"
[     5.745]    compiled for 1.21.1.8, module version = 1.0.0
[     5.745]    ABI class: X.Org Server Extension, version 10.0
[     5.746] (II) LoadModule: "intel"
[     5.746] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     5.749] (II) Module intel: vendor="X.Org Foundation"
[     5.749]    compiled for 1.21.1.6, module version = 2.99.917
[     5.749]    Module class: X.Org Video Driver
[     5.749]    ABI class: X.Org Video Driver, version 25.2
[     5.749] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     5.749] (II) intel: Driver for Intel(R) HD Graphics
[     5.749] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     5.749] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     5.749] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[     5.750] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[     5.750] (II) intel(0): SNA compiled from 2.99.917-923-gb74b67f0
[     5.751] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[     5.752] (WW) intel(0): Unknown chipset
[     5.752] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     5.752] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[     5.752] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     5.752] (==) intel(0): RGB weight 888
[     5.752] (==) intel(0): Default visual is TrueColor
[     5.752] (**) intel(0): Option "AccelMethod" "sna"
[     5.752] (**) intel(0): Option "DRI" "iris"
[     5.753] (II) intel(0): Output HDMI1 has no monitor section
[     5.753] (II) intel(0): Enabled output HDMI1
[     5.753] (II) intel(0): Output HDMI2 has no monitor section
[     5.753] (II) intel(0): Enabled output HDMI2
[     5.753] (II) intel(0): Output DP1 has no monitor section
[     5.754] (II) intel(0): Enabled output DP1
[     5.754] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     5.754] (II) intel(0): Output VIRTUAL1 has no monitor section
[     5.754] (II) intel(0): Enabled output VIRTUAL1
[     5.754] (--) intel(0): Output HDMI2 using initial mode 3840x2160 on pipe 0
[     5.754] (==) intel(0): TearFree enabled
[     5.754] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.754] (==) intel(0): DPI set to (96, 96)
[     5.754] (II) Loading sub module "dri3"
[     5.754] (II) LoadModule: "dri3"
[     5.754] (II) Module "dri3" already built-in
[     5.754] (II) Loading sub module "dri2"
[     5.754] (II) LoadModule: "dri2"
[     5.754] (II) Module "dri2" already built-in
[     5.754] (II) Loading sub module "present"
[     5.754] (II) LoadModule: "present"
[     5.754] (II) Module "present" already built-in
[     5.755] (II) intel(0): SNA initialized with generic backend
[     5.755] (==) intel(0): Backing store enabled
[     5.755] (==) intel(0): Silken mouse enabled
[     5.755] (II) intel(0): HW Cursor enabled
[     5.756] (==) intel(0): DPMS enabled
[     5.756] (==) intel(0): Display hotplug detection enabled
[     5.757] (II) intel(0): Textured video not supported on this hardware or backend
[     5.757] (II) intel(0): [DRI2] Setup complete
[     5.757] (II) intel(0): [DRI2]   DRI driver: iris
[     5.757] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     5.757] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     5.757] (II) intel(0): hardware support for Present enabled
[     5.757] (II) Initializing extension Generic Event Extension
[     5.757] (II) Initializing extension SHAPE
[     5.757] (II) Initializing extension MIT-SHM
[     5.758] (II) Initializing extension XInputExtension
[     5.758] (II) Initializing extension XTEST
[     5.758] (II) Initializing extension BIG-REQUESTS
[     5.759] (II) Initializing extension SYNC
[     5.759] (II) Initializing extension XKEYBOARD
[     5.759] (II) Initializing extension XC-MISC
[     5.759] (II) Initializing extension SECURITY
[     5.759] (II) Initializing extension XFIXES
[     5.759] (II) Initializing extension RENDER
[     5.760] (II) Initializing extension RANDR
[     5.760] (II) Initializing extension COMPOSITE
[     5.760] (II) Initializing extension DAMAGE
[     5.760] (II) Initializing extension MIT-SCREEN-SAVER
[     5.760] (II) Initializing extension DOUBLE-BUFFER
[     5.761] (II) Initializing extension RECORD
[     5.761] (II) Initializing extension DPMS
[     5.761] (II) Initializing extension Present
[     5.761] (II) Initializing extension DRI3
[     5.761] (II) Initializing extension X-Resource
[     5.761] (II) Initializing extension XVideo
[     5.761] (II) Initializing extension XVideo-MotionCompensation
[     5.761] (II) Initializing extension GLX
[     6.236] (II) AIGLX: Loaded and initialized iris
[     6.236] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.236] (II) Initializing extension XFree86-VidModeExtension
[     6.237] (II) Initializing extension XFree86-DGA
[     6.237] (II) Initializing extension XFree86-DRI
[     6.237] (II) Initializing extension DRI2
[     6.248] (EE) intel(0): Failed to submit rendering commands (Invalid argument), disabling acceleration.
[     6.249] (II) intel(0): switch to mode 3840x2160@30.0 on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.252] (II) intel(0): Setting screen physical size to 1016 x 571
[     6.322] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.322] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.322] (II) LoadModule: "libinput"
[     6.322] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.326] (II) Module libinput: vendor="X.Org Foundation"
[     6.326]    compiled for 1.21.1.8, module version = 1.4.0
[     6.326]    Module class: X.Org XInput Driver
[     6.326]    ABI class: X.Org XInput driver, version 24.4
[     6.326] (II) Using input driver 'libinput' for 'Power Button'
[     6.326] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 25 paused 0
[     6.326] (**) Power Button: always reports core events
[     6.326] (**) Option "Device" "/dev/input/event2"
[     6.332] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.332] (II) event2  - Power Button: device is a keyboard
[     6.332] (II) event2  - Power Button: device removed
[     6.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     6.332] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.333] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.333] (II) event2  - Power Button: device is a keyboard
[     6.333] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[     6.333] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.333] (II) Using input driver 'libinput' for 'Video Bus'
[     6.334] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[     6.334] (**) Video Bus: always reports core events
[     6.334] (**) Option "Device" "/dev/input/event3"
[     6.335] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.335] (II) event3  - Video Bus: device is a keyboard
[     6.335] (II) event3  - Video Bus: device removed
[     6.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[     6.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.335] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[     6.335] (II) event3  - Video Bus: device is a keyboard
[     6.336] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.336] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.336] (II) Using input driver 'libinput' for 'Power Button'
[     6.336] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 29 paused 0
[     6.336] (**) Power Button: always reports core events
[     6.336] (**) Option "Device" "/dev/input/event1"
[     6.337] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.337] (II) event1  - Power Button: device is a keyboard
[     6.337] (II) event1  - Power Button: device removed
[     6.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.338] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.338] (II) event1  - Power Button: device is a keyboard
[     6.338] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     6.338] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.338] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.338] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 30 paused 0
[     6.338] (**) Sleep Button: always reports core events
[     6.338] (**) Option "Device" "/dev/input/event0"
[     6.339] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.339] (II) event0  - Sleep Button: device is a keyboard
[     6.339] (II) event0  - Sleep Button: device removed
[     6.339] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     6.339] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.340] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     6.340] (II) event0  - Sleep Button: device is a keyboard
[     6.340] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[     6.340] (II) No input driver specified, ignoring this device.
[     6.340] (II) This device may have been added with another device file.
[     6.341] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event6)
[     6.341] (II) No input driver specified, ignoring this device.
[     6.341] (II) This device may have been added with another device file.
[     6.341] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event7)
[     6.341] (II) No input driver specified, ignoring this device.
[     6.341] (II) This device may have been added with another device file.
[     6.341] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event8)
[     6.341] (II) No input driver specified, ignoring this device.
[     6.341] (II) This device may have been added with another device file.
[     6.341] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[     6.341] (II) No input driver specified, ignoring this device.
[     6.341] (II) This device may have been added with another device file.
[     8.100] (--) intel(0): HDMI max TMDS frequency 300000KHz

Die CPU ist wie im Titel beschrieben ein Intel N95 https://www.intel.de/content/www/de/de/products/sku/231800/intel-processor-n95-6m-cache-up-to-3-40-ghz/specifications.html

Wenn ich die Config weglasse ist das Ergebnis das selbe :/

Edit: Sorry der Xorg-Log lässt sich nicht als Code formatieren

Administrativer Edit: Code in Codeblock gefasst. Das ist leider etwas Tricky, siehe aber hier.

k.osmo

Moin, mir ist da was aufgefallen im Xorg-Log (von dem ich ausgehe, dass es das aktuellste ist):
Erstens wird sowieso der Modesetting-Treiber genutzt…

J4son [ 5.750] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103

…und zweitens funktioniert die Hardware-Beschleunigung nicht:

J4son [ 6.248] (EE) intel(0): Failed to submit rendering commands (Invalid argument), disabling acceleration.

Ich würde es doch mal ohne den Xorg-Treiber versuchen (xf86-video-intel deinstallieren und die zugehörige Config zum .bak umbenennen). EarlyKMS sollte inzwischen automatisch konfiguriert sein, wie ich gerade gelesen habe, sonst das i915-Modul ins initramfs ein- und dieses überhaupt neubauen. Habe allerdings keine Ahnung, ob das dann tatsächlich einen Unterschied macht.

J4son

Laut Hersteller unterstützen beide HDMI-Ports 4k@60HZ. Und auch bei 3840x2160 wird maximal 30hz in Kodi angezeigt.

Das Kabel sollte nicht das Problem sein: https://www.amazon.de/gp/product/B00FK0YGLO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

krisz

J4son
Wenn ich mir die 1*-Bewertungen des Kabels anschaue, wäre ich mir da nicht so sicher. Und ich bezweifle, dass das mit den Specs wirklich zertifiziert ist. Es wird als HDMI High Speed bezeichnet und das unterstützt offiziell nur bis 4K@30Hz.

J4son

Also ich kann ausschließen dass es am Kabel oder am TV liegt.

Ich habe jetzt den Vorgänger aus dem Keller geholt und dort mit selbigen HDMI-Kabel das ganze getestet. Dort wird mir in Kodi 4096@60 Hz angeboten :/

J4son

Leider waren bisher alle Anläufe nicht von Erfolg gekrönt:

Wechsel der Unterschiedlichen Treiber
Auch das i915-Modul direkt in's initramfs einzubinden (und auch dies neu zu bauen)
Ich hab sogar mittlerweile versucht das EDID-File zu modifizieren und manuell zu laden

Das Traurige bei dem Ganzen ist, dass der PC mit selbem TV & Verkabelung unter Windows 4k@60hz unterstützt...ich will nur wirklich nicht Windows verwenden...

J4son

Ich gebe es mit dem Teil auf...Geht zurück an den Hersteller und ich nehme lieber ein paar Euro mehr in die Hand um einen kleinen HTPC zusammen zu bauen.

Datenschutz
Impressum