Arch Linux

Tastatur funktioniert bei systemd-boot nicht

[gelöscht]

Hallo ich verwende auf meinem PC Windows und Archlinux im dual boot. Als Bootloader verwende ich systemd-boot.
Das funktionierte erst auch alles reibungslos bis ich in der Bootkonfiguration rumgespielt habe. Eigentlich habe ich nichts anderes gemacht als den timeout von 4 Sekunden auf 0 Sekunden zu senken.
Später habe ich den timeout wieder zurück auf 4 Sekunden gesetzt. Seit dem reagiert die Tastatur in dem Bootmenu wo ich auswählen kann welches Betriebssystem ich starten möchte, nicht mehr.
Ich verwende eine Logitech craft. Sie ist kabellos. Ich habe es aber auch schon mit einer USB Tastatur probiert. DIe funktioniert auch nicht. Außerdem hatte die Tastatur ja schonmal funktioniert.

bootctl gibt das Folgende aus

System:
     Firmware: UEFI 2.70 (American Megatrends 5.17)
  Secure Boot: disabled
   Setup Mode: user
 TPM2 Support: no
 Boot into FW: supported

Current Boot Loader:
      Product: systemd-boot 249.2-1-arch
     Features: + Boot counting
               + Menu timeout control
               + One-shot menu timeout control
               + Default entry control
               + One-shot entry control
               + Support for XBOOTLDR partition
               + Support for passing random seed to OS
               + Boot loader sets ESP information
          ESP: /dev/disk/by-partuuid/ab651e8a-1a11-4fde-b2b4-f84a0fed5386
         File: `-/EFI/SYSTEMD/SYSTEMD-BOOTX64.EFI

Random Seed:
 Passed to OS: yes
 System Token: set
       Exists: yes

Available Boot Loaders on ESP:
          ESP: /boot/efi (/dev/disk/by-partuuid/ab651e8a-1a11-4fde-b2b4-f84a0fed5386)
         File: `-/EFI/systemd/systemd-bootx64.efi (systemd-boot 249.2-1-arch)
         File: `-/EFI/BOOT/bootx64.efi (systemd-boot 249.2-1-arch)

Boot Loaders Listed in EFI Variables:
        Title: Linux Boot Manager
           ID: 0x0003
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/ab651e8a-1a11-4fde-b2b4-f84a0fed5386
         File: `-/EFI/systemd/systemd-bootx64.efi

        Title: Windows Boot Manager
           ID: 0x0000
       Status: active, boot-order
    Partition: /dev/disk/by-partuuid/ab651e8a-1a11-4fde-b2b4-f84a0fed5386
         File: `-/EFI/MICROSOFT/BOOT/BOOTMGFW.EFI

Boot Loader Entries:
        $BOOT: /boot/efi (/dev/disk/by-partuuid/ab651e8a-1a11-4fde-b2b4-f84a0fed5386)

Default Boot Loader Entry:
        title: Arch Linux
           id: arch.conf
       source: /boot/efi/loader/entries/arch.conf
        linux: /vmlinuz-linux
       initrd: /amd-ucode.img
               /initramfs-linux.img
      options: root="LABEL=arch" rw

Braucht ihr sonst noch irgendwelche Ausgaben oder Angaben zur Hardware?

Vielen Dank schonmal
Bernd

[gelöscht]

Es gibt noch ein Update. Mittlerweile gehen Maus und Tastatur in der grafischen umgebung erst nach über eine Minute Wartezeit.
Vorher reagiert da nichts. Das Problem scheinen aber weniger Maus- und Tastatur , sondern viel mehr die USB ports zu sein. Maus und Tastatur habe ich mit einem usb dongle angeschlossen. Wenn ich irgendwas anderes in die usb ports stecke, kann ich es auch erst nach über einer Minute Wartezeit verwenden.

 dmesg | grep usb

gibt das Folgende aus

[    2.921153] usbcore: registered new interface driver usbhid
[    2.921154] usbhid: USB HID core driver
[    7.511295] usb 1-6: device descriptor read/64, error -110
[   23.084612] usb 1-6: device descriptor read/64, error -110
[   23.521229] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[   28.844412] usb 1-6: device descriptor read/64, error -110
[   44.417879] usb 1-6: device descriptor read/64, error -110
[   44.524572] usb usb1-port6: attempt power cycle
[   44.927968] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[   49.727653] usb 1-6: Device not responding to setup address.
[   54.734328] usb 1-6: Device not responding to setup address.
[   54.941193] usb 1-6: device not accepting address 5, error -71
[   55.271208] usb 1-6: new high-speed USB device number 6 using xhci_hcd
[   60.070981] usb 1-6: Device not responding to setup address.
[   65.077619] usb 1-6: Device not responding to setup address.
[   65.284561] usb 1-6: device not accepting address 6, error -71
[   65.284602] usb usb1-port6: unable to enumerate USB device
[   65.407903] usb 1-7: new high-speed USB device number 7 using xhci_hcd
[   65.571012] usb 1-7: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.60
[   65.571017] usb 1-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   65.571019] usb 1-7: Product: USB2.0 Hub
[   65.734505] usb 1-8: new full-speed USB device number 8 using xhci_hcd
[   65.989794] usb 1-8: New USB device found, idVendor=26ce, idProduct=01a2, bcdDevice= 0.00
[   65.989798] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   65.989800] usb 1-8: Product: LED Controller
[   65.989801] usb 1-8: Manufacturer: ASRock
[   65.989802] usb 1-8: SerialNumber: A02019100900
[   66.018650] input: ASRock LED Controller as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-8/1-8:1.0/0003:26CE:01A2.0006/input/input25
[   66.034554] usb 1-7.2: new low-speed USB device number 9 using xhci_hcd
[   66.074676] hid-generic 0003:26CE:01A2.0006: input,hidraw5: USB HID v1.10 Device [ASRock LED Controller] on usb-0000:02:00.0-8/input0
[   66.285732] usb 1-7.2: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[   66.285736] usb 1-7.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   66.285737] usb 1-7.2: Product: Dell KB216 Wired Keyboard
[   66.325828] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/1-7.2/1-7.2:1.0/0003:413C:2113.0007/input/input26
[   66.421354] hid-generic 0003:413C:2113.0007: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-7.2/input0
[   66.456819] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/1-7.2/1-7.2:1.1/0003:413C:2113.0008/input/input27
[   66.561368] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:00.0-5/input2
[   66.617975] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/1-7.2/1-7.2:1.1/0003:413C:2113.0008/input/input28
[   66.618019] hid-generic 0003:413C:2113.0008: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:02:00.0-7.2/input1
[   66.677370] input: Logitech Wireless Device PID:4082 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4082.0009/input/input29
[   66.677447] input: Logitech Wireless Device PID:4082 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4082.0009/input/input30
[   66.677494] hid-generic 0003:046D:4082.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4082] on usb-0000:02:00.0-5/input2:1
[   66.679352] input: Logitech Wireless Device PID:4066 Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4066.000A/input/input34
[   66.679417] input: Logitech Wireless Device PID:4066 Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4066.000A/input/input35
[   66.679451] hid-generic 0003:046D:4066.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4066] on usb-0000:02:00.0-5/input2:2
[   66.707655] usb 1-7.3: new high-speed USB device number 10 using xhci_hcd
[   66.830752] usb 1-7.3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[   66.830755] usb 1-7.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   66.830757] usb 1-7.3: Product: USB2.0 Hub
[   66.954555] usb 1-7.4: new high-speed USB device number 11 using xhci_hcd
[   67.083797] usb 1-7.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[   67.083801] usb 1-7.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   67.083803] usb 1-7.4: Product: USB2.0 Hub
[   67.204323] usb 1-7.3.2: new full-speed USB device number 12 using xhci_hcd
[   67.481000] usb 1-7.4.1: new full-speed USB device number 13 using xhci_hcd
[   67.534640] usb 1-7.3.2: New USB device found, idVendor=1e71, idProduct=2007, bcdDevice= 2.01
[   67.534643] usb 1-7.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   67.534644] usb 1-7.3.2: Product: NZXT USB Device
[   67.534644] usb 1-7.3.2: Manufacturer: NZXT. - Inc.
[   67.534645] usb 1-7.3.2: SerialNumber: 00000000001A
[   67.581091] hid-generic 0003:1E71:2007.000B: hiddev97,hidraw6: USB HID v1.11 Device [NZXT. - Inc. NZXT USB Device] on usb-0000:02:00.0-7.3.2/input0
[   67.824325] usb 1-7.3.3: new full-speed USB device number 14 using xhci_hcd
[   67.861887] usb 1-7.4.1: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
[   67.861892] usb 1-7.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   67.917866] usbcore: registered new interface driver btusb
[   68.098069] usb 1-7.3.3: New USB device found, idVendor=1e71, idProduct=2009, bcdDevice= 2.00
[   68.098072] usb 1-7.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   68.098073] usb 1-7.3.3: Product: NZXT USB Device
[   68.098074] usb 1-7.3.3: Manufacturer: NZXT. - Inc.
[   68.098075] usb 1-7.3.3: SerialNumber: 00000000001A
[   68.115542] hid-generic 0003:1E71:2009.000C: hiddev99,hidraw8: USB HID v1.11 Device [NZXT. - Inc. NZXT USB Device] on usb-0000:02:00.0-7.3.3/input0
[   68.185183] input: Logitech MX Master 3 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4082.0009/input/input39
[   68.185320] logitech-hidpp-device 0003:046D:4082.0009: input,hidraw9: USB HID v1.11 Keyboard [Logitech MX Master 3] on usb-0000:02:00.0-5/input2:1
[   69.259490] input: Logitech Craft as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/0003:046D:4066.000A/input/input40
[   69.259643] logitech-hidpp-device 0003:046D:4066.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Craft] on usb-0000:02:00.0-5/input2:2

Hat jemand eine Idee?

Kerberos

Mein Schuß ins Blaue:
Sind irgendwelche neuen USB-Devices hinzugekommen? Wenn ja, dann das entsprechende Device abstöpseln und Prüfen ob die USB-Probleme beim nächsten bootvorgang weg sind.