Hey,
ich hab mir ein Schenker S406 Slim bestellt- Aber aus unbekannten Gründen wird bei Archlinux die Tastatur und das Touchpad nicht erkannt.
Weder bei der neuen Installations Iso, noch bei meiner aktuellen Installierten Version auf meiner Festplatte.
Wenn ich mit Ubuntu boote geht es ohne Probleme. Ich kann auch normal ins Bios und auch das Gummiboot verwenden. Aber sobald ich den Kernel lade funktioniert nichts mehr, da hilft nur noch meine USB Tastatur.
Ich kann beim start nichtmal mein Cryptsetup Passwort eingeben. Es ist also kein Xorg Problem.
❯ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1c.5 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #6 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
01:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
~
❯ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0cf3:e300 Atheros Communications, Inc.
Bus 001 Device 003: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 006: ID 1c7a:0603 LighTuning Technology Inc.
Bus 001 Device 005: ID 04f2:b551 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
❯ sudo hwinfo --keyboard
13: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: cLrx.0PGCqK2HNaA
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: keyboard
Model: "Logitech Unifying Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc52b "Unifying Receiver"
Revision: "12.01"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v046DpC52Bd1201dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (Hub)
❯ sudo hwinfo --mouse
26: USB 00.1: 10503 USB Mouse
[Created at usb.122]
Unique ID: 3X50.x2LcURBGx5F
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1
SysFS BusID: 1-2:1.1
Hardware Class: mouse
Model: "Logitech Unifying Receiver"
Hotplug: USB
Vendor: usb 0x046d "Logitech, Inc."
Device: usb 0xc52b "Unifying Receiver"
Revision: "12.01"
Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v046DpC52Bd1201dc00dsc00dp00ic03isc01ip02in01"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (Hub)
❯ cat /boot/loader/entries/arch.conf
title Arch Linux CK
linux /vmlinuz-linux-ck
initrd /initramfs-linux-ck.img
options cryptdevice=/dev/sdb1:home root=/dev/sda2 rw elevator=noop quiet
Es scheint als würde einfach nichts erkannt werden, hwinfo zeigt mir nur meine USB Tastatur an.
Hat wer einen Rat? Das wäre echt klasse. Ich weiß nämlich nicht mehr weiter :/
Danke schonmal im voraus!