Arch Linux

Beim booten wird der Bildschirm schwarz [gelöst?]

Südwind

Hallo zusammen,
bin ein Neuer :-)
ich nutze seit mittlerweile einigen Jahren Arch Linux, bisher ohne Probleme :cool:
Seit dem letzten update jedoch schaltet der Bildschirm beim booten nach der Zeile

 [ok]Started udev Kernel Device Manager.

einfach ab. Bisher hat sich beim Bootvorgang irgendwann die Auflösung geändert (80 x 25 (?) in ???), könnte sein, dass das die Stelle ist wo nun der Bildschirm schwarz bleibt?!

Da ich auch mit "blindem" Loginversuchen nicht weitergekommen bin habe ich über chroot openssh installiert und kann mich darüber nun auch einloggen. Anschließend habe ich mal die Logs durchsucht, da aber nichts hilfreiches gefunden -dies muss aber nichts heissen, würde mich nicht als Experten bezeichnen... Außerdem habe ich den "xorg-server" und "lxdm" deinstalliert, auch das brachte keine Änderung.

Nun weiss ich nicht mehr weiter 😐 und erhoffe mir von den anwesenden Experten eine Hilfe!!

Falls es euch hilft noch ein paar Einzelheiten zum PC:
Fujitsu Esprimo 7935
Intel Q45 Chipsatz und Grafik

 [ich@fred ~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)

Vielen Dank schon mal und gute Nacht
Daniel

[Edit] Gelöst! Siehe Beitrat #16 und #17

Edward d'Eath

Moin,

was geben denn die folgenden Befehle bei Dir aus?

head -n 10 /etc/mkinitcpio.conf

lspci -nnk | grep -i vga -A2

Südwind

Moin moin,

Edward d'Eath schriebMoin,

was geben denn die folgenden Befehle bei Dir aus?
head -n 10 /etc/mkinitcpio.conf

hier bekomme ich:

head -n 10 /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES=""

# BINARIES
# This setting includes any additional binaries a given user may

und der zweite Befehl ergibt

lspci -nnk | grep -i vga -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03)
        Subsystem: Fujitsu Technology Solutions Device [1734:114c]
        Kernel driver in use: i915

Martin-MS

Trage mal in die /etc/mkinitcpio.conf

MODULES="i915"

ein und erstelle die initramfs , möglicherweise hilft das schon.

Edward d'Eath

Da war der Martin schneller als ich...

Martin-MS schriebTrage mal in die /etc/mkinitcpio.conf
MODULES="i915"
ein und erstelle die initramfs , möglicherweise hilft das schon.

mkinitcpio -p linux

Lesestoff für Dich

Hth,

Edward

Südwind

Moin nochmal,

vielen Dank für eure Antworten!

Leider hat sich die Sache mit dem neu erzeugten Kernel verschlimmbessert....
Der Bildschirim geht nun schon aus nachdem der Kernel geladen wurde 🙁

Das zeigt aber doch das irgendetwas mit dem Treiber "i915" nicht stimmt, oder?

Gruß
Daniel

Edward d'Eath

Südwind schrieb Das zeigt aber doch das irgendetwas mit dem Treiber "i915" nicht stimmt, oder?

Die fehlt vermutlich der Treiber xf86-video-intel.

Hth,

Edward

Südwind

Hallo Edward,
das kann ich mir nicht vorstellen, denn

[ich@fred ~]$ lsmod | grep i915
i915                 1134592  2
video                  36864  1 i915
drm_kms_helper        106496  1 i915
drm                   286720  4 i915,drm_kms_helper
button                 16384  1 i915
i2c_algo_bit           16384  1 i915
intel_gtt              20480  3 i915,intel_agp

Das war auch schon vor dem Kernel- neubau so (Hätte ich vielleicht mal erwähnen sollen!?).

Gruß
Daniel

Edward d'Eath

Dann überprüf mal anhand des Wikis, ob Du alles richtig konfiguriert und installiert hast.

https://wiki.archlinux.de/title/Anleitung_f%C3%BCr_Einsteiger

https://wiki.archlinux.de/title/X
https://wiki.archlinux.org/index.php/X

https://wiki.archlinux.de/title/Intel
https://wiki.archlinux.org/index.php/Intel

Da ich meine Glaskugel gerade verliehen habe, wäre es schön, wenn Du uns die entsprechenden Protokolle (bzw. Auszüge daraus) zeigst.

dmesg

grep -e EE -e EE ~/.local/share/xorg/Xorg.0.log

Martin-MS

Sind auch die Intel-Microcodes installiert? Ist das gesamte System aktuell oder nur teilweise aktualisiert worden?

Einige Mirrors scheinen derzeit auch nicht aktuell zu sein; http://mirror.23media.de/archlinux hatte ich gerne benutzt, wegen seiner schnellen Antwortzeiten steht er im Ranking auch immer ganz oben, leider wurden die Inhalte seit drei Tagen nicht mehr aktualisiert. Deswegen vielleicht auch mal den Mirror wechseln.

Südwind

Hallo nochmal,
ich habe jetzt nochmal "xf86-video-intel" deinstalliert und nach einem reboot neu installiert. Dabei ist mir ein Hinweis aufgefallen:

pacman -S xf86-video-intel
Löse Abhängigkeiten auf...
....
(1/1) Installiere xf86-video-intel                               [####################################] 100%
>>> This driver uses SNA as the default acceleration method. You can try
    falling back to UXA if you run into trouble. To do so, save a file with
    the following content as /etc/X11/xorg.conf.d/20-intel.conf :
      Section "Device"
        Identifier  "Intel Graphics"
        Driver      "intel"
        Option      "AccelMethod"  "uxa"
        #Option      "AccelMethod"  "sna"
      EndSection

Dies hat aber leider auch nichts gebracht 🙁

Als ich mit deinstalliertem Grafiktreiber gebootet habe schaltete der Monitor übrigens an der gleichen Stelle ab wie sonst auch. Liegt es denn wirklich am Treiber???

Gruß
Daniel

Edward d'Eath

Südwind schrieb Als ich mit deinstalliertem Grafiktreiber gebootet habe schaltete der Monitor übrigens an der gleichen Stelle ab wie sonst auch. Liegt es denn wirklich am Treiber???

Dann must Du auch /etc/mkinitcpio.conf editieren und

MODULES="i915"

entfernen und erneut

mkinitcpio -p linux

ausführen.

Nochmal meine Bitte an Dich: Lies die Wikis, die ich weiter oben für Dich verlinkt habe!

Ab jetzt bin ich hier raus...

Südwind

Edward d'Eath schriebDann überprüf mal anhand des Wikis, ob Du alles richtig konfiguriert und installiert hast.

https://wiki.archlinux.de/title/Anleitung_f%C3%BCr_Einsteiger

https://wiki.archlinux.de/title/X
https://wiki.archlinux.org/index.php/X

https://wiki.archlinux.de/title/Intel
https://wiki.archlinux.org/index.php/Intel

Da ich meine Glaskugel gerade verliehen habe, wäre es schön, wenn Du uns die entsprechenden Protokolle (bzw. Auszüge daraus) zeigst.
dmesg
grep -e EE -e EE ~/.local/share/xorg/Xorg.0.log

Hallo Edward,
da haben wir gleichzeitig geschrieben...

Die Wikiseiten habe ich mir schon angesehen, aber nichts hilfreiches gefunden (Blindes Huhn??)

Hier einmal dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.1-2-ARCH (builduser@foutrelis) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016
[    0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 ro initrd=../initramfs-linux.img
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000db7affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db7b0000-0x00000000db7c4fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000db7c5000-0x00000000db7c7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000db7c8000-0x00000000db7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbb00000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000018dffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000018e000000-0x000000018fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: FUJITSU SIEMENS ESPRIMO P7935                 /D2812-A1, BIOS 6.00 R1.11.2812.A1               01/15/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x18e000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask F80000000 write-back
[    0.000000]   3 base 180000000 mask FE0000000 write-back
[    0.000000]   4 base 0DBC00000 mask FFFC00000 uncachable
[    0.000000]   5 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 base 0DBB00000 mask FFFF00000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xdbb00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdb7b0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f9020-0x000f902f] mapped at [ffff8800000f9020]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[    0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[    0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[    0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7fca3000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F8F20 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x00000000DB7BF9EB 000094 (v01 FSC    PC       00060000  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000DB7C46F5 0000F4 (v03 FSC    PC       00060000      000F4240)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20150930/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-623)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20150930/tbfadt-704)
[    0.000000] ACPI: DSDT 0x00000000DB7BFA7F 004C02 (v01 FSC    D2812/A1 00060000 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000DB7C7FC0 000040
[    0.000000] ACPI: FACS 0x00000000DB7C7FC0 000040
[    0.000000] ACPI: TCPA 0x00000000DB7C47E9 000032 (v01 Phoeni x        00060000 TL   00000000)
[    0.000000] ACPI: DMAR 0x00000000DB7C481B 0000F8 (v01 Intel  OEMDMAR  00060000 LOHR 00000001)
[    0.000000] ACPI: SSDT 0x00000000DB7C4913 0000D8 (v01 FSC    CST_PR00 00060000  CSF 00000001)
[    0.000000] ACPI: SSDT 0x00000000DB7C49EB 0000D8 (v01 FSC    CST_PR01 00060000  CSF 00000001)
[    0.000000] ACPI: SSDT 0x00000000DB7C4AC3 0000F8 (v01 FSC    PST_PR00 00060000  CSF 00000001)
[    0.000000] ACPI: SSDT 0x00000000DB7C4BBB 0000F8 (v01 FSC    PST_PR01 00060000  CSF 00000001)
[    0.000000] ACPI: SPCR 0x00000000DB7C4CB3 000050 (v01 PTLTD  $UCRTBL$ 00060000 PTL  00000001)
[    0.000000] ACPI: SLIC 0x00000000DB7C4D03 000176 (v01 FSC    PC       00060000  LTP 00000000)
[    0.000000] ACPI: MCFG 0x00000000DB7C4E79 00003C (v01 PTLTD    MCFG   00060000  LTP 00000000)
[    0.000000] ACPI: HPET 0x00000000DB7C4EB5 000038 (v01 PTLTD  HPETTBL  00060000  LTP 00000001)
[    0.000000] ACPI: APIC 0x00000000DB7C4EED 000068 (v01 PTLTD  ? APIC   00060000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000DB7C4F55 000028 (v01 PTLTD  $SBFTBL$ 00060000  LTP 00000001)
[    0.000000] ACPI: ASF! 0x00000000DB7C4F7D 000083 (v16   CETP     CETP 00060000 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000018dffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x18dff8000-0x18dffbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000018dffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000db7affff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000018dffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000018dffffff]
[    0.000000] On node 0 totalpages: 1480523
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13983 pages used for memmap
[    0.000000]   DMA32 zone: 894896 pages, LIFO batch:31
[    0.000000]   Normal zone: 9088 pages used for memmap
[    0.000000]   Normal zone: 581632 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdc000000-0xdfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb7b0000-0xdb7c4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb7c5000-0xdb7c7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb7c8000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdbafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88018dc00000 s92696 r8192 d30184 u1048576
[    0.000000] pcpu-alloc: s92696 r8192 d30184 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1457367
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda6 ro initrd=../initramfs-linux.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5746224K/5922092K available (5721K kernel code, 945K rwdata, 1820K rodata, 1188K init, 1156K bss, 175868K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:8448 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3166.911 MHz processor
[    0.003343] Calibrating delay loop (skipped), value calculated using timer frequency.. 6336.73 BogoMIPS (lpj=10556370)
[    0.003346] pid_max: default: 32768 minimum: 301
[    0.003353] ACPI: Core revision 20150930
[    0.005861] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.005882] Security Framework initialized
[    0.005885] Yama: becoming mindful.
[    0.006387] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011881] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014606] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014616] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.015046] Initializing cgroup subsys io
[    0.015051] Initializing cgroup subsys memory
[    0.015060] Initializing cgroup subsys devices
[    0.015064] Initializing cgroup subsys freezer
[    0.015068] Initializing cgroup subsys net_cls
[    0.015071] Initializing cgroup subsys pids
[    0.015091] CPU: Physical Processor ID: 0
[    0.015092] CPU: Processor Core ID: 0
[    0.015095] mce: CPU supports 6 MCE banks
[    0.015102] CPU0: Thermal monitoring enabled (TM2)
[    0.015105] process: using mwait in idle threads
[    0.015109] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.015111] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.015390] Freeing SMP alternatives memory: 20K (ffffffff81a17000 - ffffffff81a1c000)
[    0.016680] ftrace: allocating 22852 entries in 90 pages
[    0.023397] DMAR: Host address width 36
[    0.023399] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.023408] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.023409] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[    0.023412] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630272 ecap 1000
[    0.023413] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[    0.023417] DMAR: dmar2: reg_base_addr fed92000 ver 1:0 cap c0000020630272 ecap 1000
[    0.023418] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.023421] DMAR: dmar3: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[    0.023422] DMAR: RMRR base: 0x000000db7c8000 end: 0x000000db7fffff
[    0.023873] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059999] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E8500  @ 3.16GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.059999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.059999] ... version:                2
[    0.059999] ... bit width:              40
[    0.059999] ... generic registers:      2
[    0.059999] ... value mask:             000000ffffffffff
[    0.059999] ... max period:             000000007fffffff
[    0.059999] ... fixed-purpose events:   3
[    0.059999] ... event mask:             0000000700000003
[    0.086685] x86: Booting SMP configuration:
[    0.086688] .... node  #0, CPUs:      #1
[    0.089644] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.089657] x86: Booted up 1 node, 2 CPUs
[    0.089660] smpboot: Total of 2 processors activated (12672.46 BogoMIPS)
[    0.090087] devtmpfs: initialized
[    0.093342] PM: Registering ACPI NVS region [mem 0xdb7c5000-0xdb7c7fff] (12288 bytes)
[    0.093342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.093361] pinctrl core: initialized pinctrl subsystem
[    0.093412] RTC time: 18:11:44, date: 02/07/16
[    0.093512] NET: Registered protocol family 16
[    0.103337] cpuidle: using governor ladder
[    0.116670] cpuidle: using governor menu
[    0.116693] Simple Boot Flag at 0x44 set to 0x1
[    0.116717] ACPI: bus type PCI registered
[    0.116720] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.116810] PCI: MMCONFIG for domain 0000 [bus 00-03] at [mem 0xf8000000-0xf83fffff] (base 0xf8000000)
[    0.116813] PCI: MMCONFIG at [mem 0xf8000000-0xf83fffff] reserved in E820
[    0.116822] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.116833] PCI: Using configuration type 1 for base access
[    0.130075] ACPI: Added _OSI(Module Device)
[    0.130075] ACPI: Added _OSI(Processor Device)
[    0.130075] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.130075] ACPI: Added _OSI(Processor Aggregator Device)
[    0.135593] ACPI: Interpreter enabled
[    0.135598] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.135602] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.135613] ACPI: (supports S0 S3 S4 S5)
[    0.135614] ACPI: Using IOAPIC for interrupt routing
[    0.135634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.139198] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.139204] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.139207] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.139214] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-03] only partially covers this bridge
[    0.139650] PCI host bridge to bus 0000:00
[    0.139653] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.139655] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.139657] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.139658] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.139660] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.139662] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.139663] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.139665] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.139666] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.139668] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfebfffff window]
[    0.139670] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfedfffff window]
[    0.139671] pci_bus 0000:00: root bus resource [mem 0xfef00000-0xffafffff window]
[    0.139673] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffefffff window]
[    0.139675] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.139682] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
[    0.139701] DMAR: Forcing write-buffer flush capability
[    0.139702] DMAR: Disabling IOMMU for graphics on this chipset
[    0.139764] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
[    0.139776] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfc3fffff 64bit]
[    0.139781] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.139785] pci 0000:00:02.0: reg 0x20: [io  0x1c70-0x1c77]
[    0.139855] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
[    0.139864] pci 0000:00:02.1: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
[    0.139948] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
[    0.139982] pci 0000:00:03.0: reg 0x10: [mem 0xfc524000-0xfc52400f 64bit]
[    0.140057] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.140129] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
[    0.140150] pci 0000:00:03.2: reg 0x10: [io  0x1c88-0x1c8f]
[    0.140157] pci 0000:00:03.2: reg 0x14: [io  0x1c7c-0x1c7f]
[    0.140164] pci 0000:00:03.2: reg 0x18: [io  0x1c80-0x1c87]
[    0.140170] pci 0000:00:03.2: reg 0x1c: [io  0x1c78-0x1c7b]
[    0.140176] pci 0000:00:03.2: reg 0x20: [io  0x1c40-0x1c4f]
[    0.140262] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
[    0.140296] pci 0000:00:03.3: reg 0x10: [io  0x1c90-0x1c97]
[    0.140306] pci 0000:00:03.3: reg 0x14: [mem 0xfc526000-0xfc526fff]
[    0.140468] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
[    0.140497] pci 0000:00:19.0: reg 0x10: [mem 0xfc500000-0xfc51ffff]
[    0.140506] pci 0000:00:19.0: reg 0x14: [mem 0xfc527000-0xfc527fff]
[    0.140515] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.140572] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.140606] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.140646] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
[    0.140697] pci 0000:00:1a.0: reg 0x20: [io  0x1840-0x185f]
[    0.140774] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.140816] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
[    0.140867] pci 0000:00:1a.1: reg 0x20: [io  0x1860-0x187f]
[    0.140945] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.140986] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
[    0.141037] pci 0000:00:1a.2: reg 0x20: [io  0x1880-0x189f]
[    0.141113] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.141160] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
[    0.141188] pci 0000:00:1a.7: reg 0x10: [mem 0xfc528000-0xfc5283ff]
[    0.141259] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.141294] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.141340] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
[    0.141371] pci 0000:00:1b.0: reg 0x10: [mem 0xfc520000-0xfc523fff 64bit]
[    0.141443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.141521] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
[    0.141599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.141642] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.141688] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400
[    0.141766] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.141807] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.141853] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
[    0.141903] pci 0000:00:1d.0: reg 0x20: [io  0x18a0-0x18bf]
[    0.141980] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.142021] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
[    0.142071] pci 0000:00:1d.1: reg 0x20: [io  0x18c0-0x18df]
[    0.142147] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.142188] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
[    0.142238] pci 0000:00:1d.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.142313] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.142364] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
[    0.142392] pci 0000:00:1d.7: reg 0x10: [mem 0xfc529000-0xfc5293ff]
[    0.142462] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.142497] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.142538] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.142622] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.142664] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
[    0.142820] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
[    0.142850] pci 0000:00:1f.2: reg 0x10: [io  0x1ca8-0x1caf]
[    0.142859] pci 0000:00:1f.2: reg 0x14: [io  0x1c9c-0x1c9f]
[    0.142868] pci 0000:00:1f.2: reg 0x18: [io  0x1ca0-0x1ca7]
[    0.142877] pci 0000:00:1f.2: reg 0x1c: [io  0x1c98-0x1c9b]
[    0.142887] pci 0000:00:1f.2: reg 0x20: [io  0x1c00-0x1c1f]
[    0.142896] pci 0000:00:1f.2: reg 0x24: [mem 0xfc52a000-0xfc52a7ff]
[    0.142934] pci 0000:00:1f.2: PME# supported from D3hot
[    0.143008] pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
[    0.143028] pci 0000:00:1f.3: reg 0x10: [mem 0xfc52b000-0xfc52b0ff 64bit]
[    0.143052] pci 0000:00:1f.3: reg 0x20: [io  0x1100-0x111f]
[    0.143174] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.143229] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.143307] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.143317] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.143319] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.143321] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.143322] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.143324] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.143326] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.143328] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.143329] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.143331] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.143336] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfebfffff window] (subtractive decode)
[    0.143338] pci 0000:00:1e.0:   bridge window [mem 0xfed00000-0xfedfffff window] (subtractive decode)
[    0.143339] pci 0000:00:1e.0:   bridge window [mem 0xfef00000-0xffafffff window] (subtractive decode)
[    0.143341] pci 0000:00:1e.0:   bridge window [mem 0xffc00000-0xffefffff window] (subtractive decode)
[    0.143479] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15)
[    0.143528] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 11 12 14 15) *5
[    0.143577] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 9 *10 11 12 14 15)
[    0.143626] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15)
[    0.143675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 *9 10 11 12 14 15)
[    0.143725] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15)
[    0.143773] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 *11 12 14 15)
[    0.143821] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 *11 12 14 15)
[    0.144257] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.144320] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.144320] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.144320] vgaarb: loaded
[    0.144320] vgaarb: bridge control possible 0000:00:02.0
[    0.144320] PCI: Using ACPI for IRQ routing
[    0.144320] PCI: pci_cache_line_size set to 64 bytes
[    0.144320] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[    0.144320] e820: reserve RAM buffer [mem 0xdb7b0000-0xdbffffff]
[    0.144320] e820: reserve RAM buffer [mem 0x18e000000-0x18fffffff]
[    0.144320] NetLabel: Initializing
[    0.144320] NetLabel:  domain hash size = 128
[    0.144320] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.144320] NetLabel:  unlabeled traffic allowed by default
[    0.144320] HPET: 8 timers in total, 2 timers will be used for per-cpu timer
[    0.144320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0
[    0.144320] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.146681] hpet: hpet2 irq 24 for MSI
[    0.150015] hpet: hpet3 irq 25 for MSI
[    0.150028] clocksource: Switched to clocksource hpet
[    0.156506] pnp: PnP ACPI init
[    0.156858] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.156861] system 00:00: [io  0x1000-0x107f] could not be reserved
[    0.156863] system 00:00: [io  0x1180-0x11bf] has been reserved
[    0.156865] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.156867] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.156869] system 00:00: [io  0x0810-0x081f] has been reserved
[    0.156871] system 00:00: [io  0xfe00] has been reserved
[    0.156873] system 00:00: [io  0xff00] has been reserved
[    0.156875] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.156877] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.156879] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.156881] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.156883] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.156885] system 00:00: [mem 0xfcd18000-0xfcd18fff] has been reserved
[    0.156888] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.156923] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.156994] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.157074] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.157272] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.157435] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.157465] pnp: PnP ACPI: found 6 devices
[    0.164917] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.164934] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.164937] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.164939] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.164948] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.164950] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.164952] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.164964] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.164966] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.164968] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.164970] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.164972] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.164974] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.164976] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.164978] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.164980] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.164982] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.164984] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.164985] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.164991] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.164998] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.165001] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
[    0.165007] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.165010] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.165012] pci 0000:00:1c.4: BAR 13: assigned [io  0x3000-0x3fff]
[    0.165016] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.165019] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.165024] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.165028] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.165034] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.165037] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.165042] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff]
[    0.165046] pci 0000:00:1c.4:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.165053] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.165065] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.165067] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.165069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.165070] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.165072] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.165073] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.165075] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.165077] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.165079] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xf7ffffff window]
[    0.165080] pci_bus 0000:00: resource 13 [mem 0xfc000000-0xfebfffff window]
[    0.165082] pci_bus 0000:00: resource 14 [mem 0xfed00000-0xfedfffff window]
[    0.165084] pci_bus 0000:00: resource 15 [mem 0xfef00000-0xffafffff window]
[    0.165085] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffefffff window]
[    0.165087] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.165089] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.165090] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.165092] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.165094] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf05fffff]
[    0.165095] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.165097] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.165099] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.165100] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.165102] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.165104] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.165105] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.165107] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.165108] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.165110] pci_bus 0000:03: resource 12 [mem 0xe0000000-0xf7ffffff window]
[    0.165112] pci_bus 0000:03: resource 13 [mem 0xfc000000-0xfebfffff window]
[    0.165113] pci_bus 0000:03: resource 14 [mem 0xfed00000-0xfedfffff window]
[    0.165115] pci_bus 0000:03: resource 15 [mem 0xfef00000-0xffafffff window]
[    0.165117] pci_bus 0000:03: resource 16 [mem 0xffc00000-0xffefffff window]
[    0.165147] NET: Registered protocol family 2
[    0.165330] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.165651] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.166211] TCP: Hash tables configured (established 65536 bind 65536)
[    0.166284] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.166363] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.166475] NET: Registered protocol family 1
[    0.166489] pci 0000:00:02.0: Video device with shadowed ROM
[    0.166689] PCI: CLS 32 bytes, default 64
[    0.166734] Unpacking initramfs...
[    0.218376] Freeing initrd memory: 3444K (ffff88007fca3000 - ffff880080000000)
[    0.218422] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.218425] software IO TLB [mem 0xd77b0000-0xdb7b0000] (64MB) mapped at [ffff8800d77b0000-ffff8800db7affff]
[    0.218563] Scanning for low memory corruption every 60 seconds
[    0.218835] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.219090] Initialise system trusted keyring
[    0.219244] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.220925] zbud: loaded
[    0.221095] VFS: Disk quotas dquot_6.6.0
[    0.221132] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.221292] Key type big_key registered
[    0.221607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.221638] io scheduler noop registered
[    0.221640] io scheduler deadline registered
[    0.221673] io scheduler cfq registered (default)
[    0.221863] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.222110] pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
[    0.222279] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.222285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.222299] intel_idle: does not run on family 6 model 23
[    0.222333] GHES: HEST is not enabled!
[    0.222388] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.243099] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.263725] 0000:00:03.3: ttyS1 at I/O 0x1c90 (irq = 17, base_baud = 115200) is a 16550A
[    0.263885] Linux agpgart interface v0.103
[    0.264062] rtc_cmos 00:01: RTC can wake from S4
[    0.264199] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.264230] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.264242] ledtrig-cpu: registered to indicate activity on CPUs
[    0.264552] NET: Registered protocol family 10
[    0.264733] NET: Registered protocol family 17
[    0.264863] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[    0.264868] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[    0.264903] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.265053] registered taskstats version 1
[    0.265061] Loading compiled-in X.509 certificates
[    0.265077] zswap: loaded using pool lzo/zbud
[    0.265399]   Magic number: 4:27:190
[    0.265436] acpi device:1c: hash matches
[    0.265500] rtc_cmos 00:01: setting system clock to 2016-02-07 18:11:44 UTC (1454868704)
[    0.265559] PM: Hibernation image not present or could not be loaded.
[    0.266748] Freeing unused kernel memory: 1188K (ffffffff818ee000 - ffffffff81a17000)
[    0.266750] Write protecting the kernel read-only data: 8192k
[    0.267032] Freeing unused kernel memory: 412K (ffff880001599000 - ffff880001600000)
[    0.267580] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
[    0.272881] random: systemd-tmpfile urandom read with 3 bits of entropy available
[    0.307330] i8042: PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
[    0.307333] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.309522] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.311712] ACPI: bus type USB registered
[    0.311736] usbcore: registered new interface driver usbfs
[    0.311747] usbcore: registered new interface driver hub
[    0.311770] usbcore: registered new device driver usb
[    0.311838] SCSI subsystem initialized
[    0.312109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.312431] uhci_hcd: USB Universal Host Controller Interface driver
[    0.312590] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.312596] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.312603] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.312631] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840
[    0.313394] ehci-pci: EHCI PCI platform driver
[    0.313470] libata version 3.00 loaded.
[    0.313739] hub 1-0:1.0: USB hub found
[    0.313746] hub 1-0:1.0: 2 ports detected
[    0.313940] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.313945] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.313951] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.313978] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001860
[    0.314118] hub 2-0:1.0: USB hub found
[    0.314124] hub 2-0:1.0: 2 ports detected
[    0.314416] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.314422] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    0.314428] uhci_hcd 0000:00:1a.2: detected 2 ports
[    0.314451] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880
[    0.314585] hub 3-0:1.0: USB hub found
[    0.314590] hub 3-0:1.0: 2 ports detected
[    0.315196] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.315202] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.315208] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.315229] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0
[    0.315361] hub 4-0:1.0: USB hub found
[    0.315367] hub 4-0:1.0: 2 ports detected
[    0.315796] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.315801] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
[    0.315812] ehci-pci 0000:00:1a.7: debug port 1
[    0.319704] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.319709] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfc528000
[    0.326692] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.326815] hub 5-0:1.0: USB hub found
[    0.326822] hub 5-0:1.0: 6 ports detected
[    0.350089] hub 1-0:1.0: USB hub found
[    0.350100] hub 1-0:1.0: 2 ports detected
[    0.366583] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.373424] hub 2-0:1.0: USB hub found
[    0.373435] hub 2-0:1.0: 2 ports detected
[    0.396766] hub 3-0:1.0: USB hub found
[    0.396776] hub 3-0:1.0: 2 ports detected
[    0.397057] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.397062] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[    0.397074] ehci-pci 0000:00:1d.7: debug port 1
[    0.400974] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.400979] ehci-pci 0000:00:1d.7: irq 20, io mem 0xfc529000
[    0.410034] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.410233] hub 6-0:1.0: USB hub found
[    0.410239] hub 6-0:1.0: 6 ports detected
[    0.433417] hub 4-0:1.0: USB hub found
[    0.433426] hub 4-0:1.0: 2 ports detected
[    0.433799] ahci 0000:00:1f.2: version 3.0
[    0.434005] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.434008] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part 
[    0.438118] scsi host0: ahci
[    0.441613] scsi host1: ahci
[    0.445098] scsi host2: ahci
[    0.445256] scsi host3: ahci
[    0.445375] scsi host4: ahci
[    0.445516] scsi host5: ahci
[    0.445568] ata1: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a100 irq 28
[    0.445571] ata2: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a180 irq 28
[    0.445574] ata3: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a200 irq 28
[    0.445576] ata4: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a280 irq 28
[    0.445578] ata5: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a300 irq 28
[    0.445581] ata6: SATA max UDMA/133 abar m2048@0xfc52a000 port 0xfc52a380 irq 28
[    0.445698] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.445706] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.445712] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.445739] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018c0
[    0.445947] hub 7-0:1.0: USB hub found
[    0.445955] hub 7-0:1.0: 2 ports detected
[    0.446131] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.446137] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.446143] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.446165] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018e0
[    0.446333] hub 8-0:1.0: USB hub found
[    0.446340] hub 8-0:1.0: 2 ports detected
[    0.448911] scsi host6: ata_generic
[    0.449038] scsi host7: ata_generic
[    0.449082] ata7: PATA max UDMA/100 cmd 0x1c88 ctl 0x1c7c bmdma 0x1c40 irq 18
[    0.449084] ata8: PATA max UDMA/100 cmd 0x1c80 ctl 0x1c78 bmdma 0x1c48 irq 18
[    0.763379] ata3: SATA link down (SStatus 0 SControl 300)
[    0.763433] ata4: SATA link down (SStatus 0 SControl 300)
[    0.766703] ata5: SATA link down (SStatus 0 SControl 300)
[    0.766727] ata6: SATA link down (SStatus 0 SControl 300)
[    0.876688] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    0.930039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.930059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.932770] ata2.00: ATAPI: HL-DT-ST DVDRAM GH10N, EV03, max UDMA/100
[    0.936458] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01118, max UDMA7
[    0.936461] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    0.936677] ata2.00: configured for UDMA/100
[    0.942936] ata1.00: configured for UDMA/133
[    0.943102] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1118 PQ: 0 ANSI: 5
[    1.046761] hidraw: raw HID events driver (C) Jiri Kosina
[    1.048255] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH10N     EV03 PQ: 0 ANSI: 5
[    1.061936] usbcore: registered new interface driver usbhid
[    1.061937] usbhid: USB HID core driver
[    1.062364] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:046D:C05B.0001/input/input1
[    1.062397] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1/input0
[    1.221167] tsc: Refined TSC clocksource calibration: 3166.666 MHz
[    1.221170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2da548e32c1, max_idle_ns: 440795301503 ns
[    1.223379] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.223424] sd 0:0:0:0: [sda] Write Protect is off
[    1.223426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.223445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.268303]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.268765] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.348557] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.348561] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.348724] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.220085] clocksource: Switched to clocksource tsc
[    3.330034] floppy0: no floppy controllers found
[    3.504018] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    4.078469] random: nonblocking pool is initialized
[    4.165372] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[    4.322169] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.342578] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.342695] systemd[1]: Detected architecture x86-64.
[    4.357425] systemd[1]: Set hostname to <fred>.
[    5.407580] systemd[1]: acpid.socket: Cannot add dependency job, ignoring: Unit acpid.socket failed to load: No such file or directory.
[    5.407593] systemd[1]: cups.socket: Cannot add dependency job, ignoring: Unit cups.socket failed to load: No such file or directory.
[    5.407651] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory.
[    5.408134] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.408360] systemd[1]: Reached target Remote File Systems.
[    5.458184] systemd[1]: Listening on udev Control Socket.
[    5.458391] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.458900] systemd[1]: Created slice System Slice.
[    5.459188] systemd[1]: Created slice system-dhcpcd.slice.
[    5.459469] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.459662] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.459944] systemd[1]: Created slice system-getty.slice.
[    5.460131] systemd[1]: Reached target Login Prompts.
[    5.460305] systemd[1]: Reached target Encrypted Volumes.
[    5.460503] systemd[1]: Listening on Journal Socket.
[    5.473400] systemd[1]: Mounting Debug File System...
[    5.473989] systemd[1]: Mounting POSIX Message Queue File System...
[    5.474610] systemd[1]: Mounting Huge Pages File System...
[    5.497960] systemd[1]: Mounting Configuration File System...
[    5.498572] systemd[1]: Starting Apply Kernel Variables...
[    5.499185] systemd[1]: Starting File System Check on Root Device...
[    5.499849] systemd[1]: Starting Setup Virtual Console...
[    5.521539] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    5.533397] systemd[1]: Mounting Temporary Directory...
[    5.535990] systemd[1]: Created slice User and Session Slice.
[    5.536201] systemd[1]: Reached target Slices.
[    5.536408] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.536617] systemd[1]: Listening on udev Kernel Socket.
[    5.536829] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.537450] systemd[1]: Starting Journal Service...
[    5.538101] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.538299] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.538528] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.709034] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    5.852185] systemd[1]: Started Journal Service.
[    6.344789] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    6.537557] systemd-journald[173]: Received request to flush runtime journal from PID 1
[    8.146196] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[    8.146221] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    8.148120] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    8.148235] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    8.149891] tsc: Marking TSC unstable due to TSC halts in idle
[    8.149928] ACPI: acpi_idle registered with cpuidle
[    8.150995] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.150999] ACPI: Power Button [PWRB]
[    8.151061] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.151063] ACPI: Power Button [PWRF]
[    8.151260] clocksource: Switched to clocksource hpet
[    8.199771] P-state transition latency capped at 20 uS
[    8.227064] pps_core: LinuxPPS API ver. 1 registered
[    8.227066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    8.265460] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    8.278453] parport_pc 00:04: reported by Plug and Play ACPI
[    8.278503] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    8.331583] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.604403] [drm] Initialized drm 1.1.0 20060810
[    8.633364] PTP clock support registered
[    8.687346] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    8.687348] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    8.687529] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    8.709191] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC663: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    8.709194] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[    8.709196] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    8.709198] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    8.709200] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    8.709201] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    8.709203] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    8.709205] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    8.709207] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    8.765547] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    8.765582] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    8.765614] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.765647] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.765679] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.765711] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.912530] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:19:99:59:48:96
[    8.912538] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    8.912580] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF
[    8.930486] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001028-0x000000000000102B (\_SB_.PCI0.LPC_.GPE0) (20150930/utaddress-254)
[    8.930491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.930495] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x000000000000118D (\_SB_.PCI0.LPC_.GPE1) (20150930/utaddress-254)
[    8.930499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.930525] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.115543] [drm] Memory usable by graphics device = 2048M
[    9.115548] [drm] Replacing VGA console driver
[    9.116182] Console: switching to colour dummy device 80x25
[    9.122202] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.122204] [drm] Driver supports precise vblank timestamp query.
[    9.122255] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.125131] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    9.253389] i915 0000:00:02.0: No connectors reported connected with modes
[    9.253396] [drm] Cannot find any crtc or sizes - going 1024x768
[    9.253992] fbcon: inteldrmfb (fb0) is primary device
[    9.530071] Console: switching to colour frame buffer device 128x48
[    9.531572] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.640773] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[    9.640800] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    9.736916] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   10.456570] ppdev: user-space parallel port driver
[   10.611820] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[   10.641170] gpio_ich: GPIO from 440 to 511 on gpio_ich
[   10.663857] fschmd 7-0073: Registered watchdog chardev major 10, minor: 212
[   10.663861] fschmd 7-0073: Detected FSC Syleus chip, revision: 20
[   10.745123] iTCO_vendor_support: vendor-support=0
[   10.754958] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.754996] iTCO_wdt: Found a ICH10DO TCO device (Version=2, TCOBASE=0x1060)
[   10.755204] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.650084] floppy0: no floppy controllers found
[   11.747696] Adding 4194300k swap on /dev/sda5.  Priority:-1 extents:1 across:4194300k FS
[   11.970443] mousedev: PS/2 mouse device common for all mice
[   12.152010] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[   12.563177] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[   12.736588] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
[   19.343690] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   21.794242] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   21.794386] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   34.728370] NET: Registered protocol family 15
[   35.071096] CPU feature 'AVX registers' is not supported.
[   35.128870] CPU feature 'AVX registers' is not supported.
[   35.154374] CPU feature 'AVX registers' is not supported.
[   35.209510] AVX or AES-NI instructions are not detected.
[   35.234218] AVX or AES-NI instructions are not detected.
[   35.269153] CPU feature 'AVX registers' is not supported.

und einmal das Logfile von Xorg (ohne Error, liegt bei mir unter /var/log/....):

 grep -e EE -e EE /var/log/Xorg.0.log
[    21.255] Current Operating System: Linux fred 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

Südwind

Dann must Du auch /etc/mkinitcpio.conf editieren und
MODULES="i915"
entfernen und erneut
mkinitcpio -p linux
ausführen.

Nochmal meine Bitte an Dich: Lies die Wikis, die ich weiter oben für Dich verlinkt habe!

Habe ich doch gemacht....

nur nicht erwähnt.

Ab jetzt bin ich hier raus...

...schade, trotzdem Danke!

Gruß
Daniel

Südwind

Martin-MS schriebSind auch die Intel-Microcodes installiert? Ist das gesamte System aktuell oder nur teilweise aktualisiert worden?

Hallo Martin,
danke für deinen Beitrag; habe ihn erst jetzt gesehen. Ich habe jetzt mal nach der Anleitung im Wiki das Packet "intel-ucode" installiert und den Eintrag in der Syslinux Konfiguration gemacht. Hat keine Besserung ergeben 🙁

Die Mirrors gucke ich mir auch noch mal an.

Martin-MS

Du könntest es noch mit dem LTS-Kernel versuchen, der befindet sich zur Zeit auf dem Versionsstand 4.1.17 und wird noch unterstützt. Wenn es damit wieder läuft hättest du schon mal die Fehlerursache auf den Kernel reduziert und Grafiktreiber oder andere Komponenten scheiden dann aus. Damit hättest du erst einmal wieder ein funktionierendes System und könntest es auch aktuell halten und man hat noch etwas Zeit für die eigentliche Ursachenforschung gewonnen.

Beide Kernel können zusammen installiert werden und stören sich gegenseitig nicht, du musst nur den Bootloader entsprechend erweitern damit du wechselnd einen der beiden Kernel booten kannst.

Südwind

Martin-MS schriebDu könntest es noch mit dem LTS-Kernel versuchen, der befindet sich zur Zeit auf dem Versionsstand 4.1.17 und wird noch unterstützt. Wenn es damit wieder läuft hättest du schon mal die Fehlerursache auf den Kernel reduziert und Grafiktreiber oder andere Komponenten scheiden dann aus. Damit hättest du erst einmal wieder ein funktionierendes System und könntest es auch aktuell halten und man hat noch etwas Zeit für die eigentliche Ursachenforschung gewonnen.

Beide Kernel können zusammen installiert werden und stören sich gegenseitig nicht, du musst nur den Bootloader entsprechend erweitern damit du wechselnd einen der beiden Kernel booten kannst.

Hallo Martin,
vielen Dank für den Tip: Es hat funktioniert!!! 🙂 🙂 🙂

Nun möchte ich aber gerne verstehen wo der Fehler liegt. Ist es ein Bug im Grafiktreiber? Kann / sollte ich da ein Bugreport erstellen?? Werde mich da mal im Wiki einlesen...

Vielen Dank Nochmal an alle!!

Gruß
Daniel

Martin-MS

Wo der Fehler liegt kann ich auch nicht erklären, im Grafiktreiber vermute ich aber eher nicht denn unter dem LTS-Kernel wird ja derselbe Grafiktreiber verwendet; es sei denn er arbeitet nicht vernünftig mit dem aktuellen Kernel zusammen.
Auf meinem T400 mit dem "Intel Mobile 4 Series Chipset Integrated Graphics Controller" als auch auf dem Desktop mit dem "Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller" läuft es hier auch mit Kernel 4.4.1 ohne Probleme.

Was ich noch in dem dem Zusammenhang gefunden habe ist das hier: https://wiki.archlinux.org/index.php/Intel_graphics#Blank_screen_during_boot.2C_when_.22Loading_modules.22

Blank screen during boot, when "Loading modules"
If using "late start" KMS and the screen goes blank when "Loading modules", it may help to add i915 and intel_agp to the initramfs. See Kernel mode setting#Early KMS start section.

Alternatively, appending the following kernel parameter seems to work as well:

video=SVIDEO-1:d
If you need to output to VGA then try this:

video=VGA-1:1280x800

Wegen KMS sollte auf jeden Fall das "i915"-Modul in die initramfs aufgenommen werden (habe ich seit jeher schon so), das hattest du ja gestern schon gemacht, aber vielleicht hilft zusätzlich noch das Modul "intel_agp", oder alternativ der "video"-Kernel-Parameter.