Hallo Leute,
ich versuche AMD-V auf einem OEM-Board von Fujitsu-Siemens zu nutzen. Folgende Fehlermeldung:
$ qemu-system-x86_64 -enable-kvm -cpu host -cdrom archlinux-2014.08.01-dual.iso -m 2G -boot d
ioctl(KVM_CREATE_VM) failed: 16 Device or resource busy
failed to initialize KVM: Device or resource busy
Im englischen Wiki heißt es
dazu:
If an error message like this is printed when starting QEMU with
-enable-kvm option:
… (wie oben)
that means another hypervisor is currently running.
Nur habe ich meines Wissens nach keinen anderen Hypervisor als einzig die Module
kvm und
kvm_amd geladen.
Das Setup:
(Hardware)
* OEM: Fujitsu-Siemens Scaleo P2 (Pa2666)
* Mainboard: AMD690VM-FMH (von ECS,
ähnlich,
Benchmark)
* Northbridge: RS690V
* Southbridge: SB600
* Sockel: AM2
* Prozessor: AMD Phenom X4 9600 B2 (Quadcore,
TLB-Bug, eigentlich für Sockel AM2+, aber elektrisch und mechanisch mit Leistungseinbußen kompatibel)
* BIOS: Phoenix Award V5.13 03/14/2008
* Speicher: 5120 MB 1639MHz
(Software)
* Linux 3.17.4-1-ARCH x86_64, up-to-date
* LVM on LUKS
* rootless Xorg mit nouveau-Treiber
* Pakete (ohne Abhängigkeiten): qemu, virt-manager
Die Qemu-Emulation ohne KVM funktioniert. Virt-Manager bricht mit demselben Fehler wie oben ab.
Ausführlich:
(lscpu)
Architektur: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte-Reihenfolge: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) pro Kern: 1
Kern(e) pro Socket: 4
Socket(s): 1
NUMA-Knoten: 1
Anbieterkennung: AuthenticAMD
Prozessorfamilie: 16
Modell: 2
Modellname: AMD Phenom(tm) 9600 Quad-Core Processor
Stepping: 2
CPU MHz: 1150.000
Maximale Taktfrequenz der CPU:2300,0000
Minimale Taktfrequenz der CPU:1150,0000
BogoMIPS: 4601.12
Virtualisierung: AMD-V
L1d Cache: 64K
L1i Cache: 64K
L2 Cache: 512K
L3 Cache: 2048K
NUMA-Knoten0 CPU(s): 0-3
(flags)
$ grep -E "(vmx|svm|0xc0f)" --color=always /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs hw_pstate npt lbrv svm_lock vmmcall
(Doppelung gekürzt)
(lspci)
$ lspci -tv
-[0000:00]-+-00.0 Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
+-02.0-[01]----00.0 NVIDIA Corporation G96 [GeForce 9500 GS]
+-07.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
+-12.0 Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA
+-13.0 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0)
+-13.1 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1)
+-13.2 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2)
+-13.3 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3)
+-13.4 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4)
+-13.5 Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI)
+-14.0 Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
+-14.1 Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE
+-14.2 Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
+-14.3 Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
+-14.4-[03]----08.0 VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
+-18.0 Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
+-18.1 Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
+-18.2 Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
+-18.3 Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
\-18.4 Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
# lspci -vv
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #2, PowerLimit 75.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 7910
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #6, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: pcieport
Kernel modules: shpchp
00:12.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Elitegroup Computer Systems Device 4382
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.3 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.4 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:13.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 14)
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at fa00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE (prog-if 8a [Master SecP PriP])
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp, pata_acpi, ata_generic
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge
Subsystem: Elitegroup Computer Systems Device 2613
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 3.00
Link Frequency: 1.0GHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel modules: k10temp
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GS] (rev a1) (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device 9600
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at df00 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0f00c Data: 41b1
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)
Subsystem: Elitegroup Computer Systems RTL8111/8168 PCI Express Gigabit Ethernet controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 25
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fddff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [48] Vital Product Data
Unknown small resource type 05, will not decode more.
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0f00c Data: 4142
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information: Len=4c <?>
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [12c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [148 v1] Device Serial Number 53-00-00-00-10-ec-81-68
Capabilities: [154 v1] Power Budgeting <?>
Kernel driver in use: r8169
Kernel modules: r8169
03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device 3044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at cf00 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
(dmidecode)
# dmidecode
# dmidecode 2.12
SMBIOS 2.5 present.
51 structures occupying 2270 bytes.
Table at 0x000F0000.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: V5.13
Release Date: 03/14/2008
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: AMD690VM-FMH
Version: V5.13
Serial Number: YSJC011089
UUID: *******
Wake-up Type: Power Switch
SKU Number: Unknow
Family:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: AMD690VM-FMH
Version: V5.13
Serial Number:
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: AMD
Type: Desktop
Lock: Not Present
Version: RS690
Serial Number: YSJC011089
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000
Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: Socket AM2
Type: Central Processor
Family: Pentium Pro
Manufacturer: AMD
ID: 22 0F 10 00 FF FB 8B 17
Signature: Type 0, Family 16, Model 2, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
HTT (Multi-threading)
Version: AMD Phenom(tm) 9600 Quad-Core Processor
Voltage: 1.2 V
External Clock: 200 MHz
Max Speed: 2300 MHz
Current Speed: 2300 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 4
0x0006
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities: None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0 1
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2 3
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4 5
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 6 7
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 2048 MB (Double-bank Connection)
Enabled Size: 2048 MB (Double-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Other
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Other
Port Type: USB
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Other
Port Type: USB
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Other
Port Type: USB
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Other
Port Type: USB
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Other
Port Type: USB
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB7
External Connector Type: Other
Port Type: USB
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB8
External Connector Type: Other
Port Type: USB
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB9
External Connector Type: Other
Port Type: USB
Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided
Handle 0x0022, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1
Handle 0x0023, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0024, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer: <BAD INDEX>
Serial Number: Not Specified
Asset Tag: None
Part Number: None
Handle 0x0025, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer: <BAD INDEX>
Serial Number: Not Specified
Asset Tag: None
Part Number: None
Handle 0x0026, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer: <BAD INDEX>
Serial Number: Not Specified
Asset Tag: None
Part Number: None
Handle 0x0027, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer: <BAD INDEX>
Serial Number: Not Specified
Asset Tag: None
Part Number: None
Handle 0x0028, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0013FFFFFFF
Range Size: 5 GB
Physical Array Handle: 0x0023
Partition Width: 1
Handle 0x0029, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0024
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1
Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0025
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1
Handle 0x002B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x000BFFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0026
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1
Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000C0000000
Ending Address: 0x0013FFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1
Handle 0x002D, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x002E, DMI type 188, 212 bytes
OEM-specific Type
Header and Data:
(gekürzt)
Handle 0x002F, DMI type 190, 212 bytes
OEM-specific Type
Header and Data:
(gekürzt)
Handle 0x0030, DMI type 192, 244 bytes
OEM-specific Type
Header and Data:
(gekürzt)
Handle 0x0031, DMI type 194, 244 bytes
OEM-specific Type
Header and Data:
(gekürzt)
Handle 0x0032, DMI type 127, 4 bytes
End Of Table
(lsmod)
$ lsmod |grep amd
kvm_amd 59131 0
edac_mce_amd 21166 0
kvm 421519 1 kvm_amd
(dmesg)
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/*** root=/dev/*** ro lang=de locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 0.000000] tseg: 0000000000
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cffe2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe3000-0x00000000cffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: FUJITSU SIEMENS AMD690VM-FMH/AMD690VM-FMH, BIOS V5.13 03/14/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 000100000000 mask FFFFC0000000 write-back
[ 0.000000] 4 base 000140000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000160000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000170000000 aka 5888M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffe0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f3dc0-0x000f3dcf] mapped at [ffff8800000f3dc0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x16fe00000-0x16fffffff]
[ 0.000000] [mem 0x16fe00000-0x16fffffff] page 2M
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16fdfffff]
[ 0.000000] [mem 0x16c000000-0x16fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x16bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcffdffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcffdffff] page 4k
[ 0.000000] RAMDISK: [mem 0x7f584000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7CC0 000024 (v02 FSC )
[ 0.000000] ACPI: RSDT 0x00000000CFFE3040 00003C (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000CFFE30C0 000074 (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0x00000000CFFE3180 0049C0 (v01 FSC AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000CFFE0000 000040
[ 0.000000] ACPI: SSDT 0x00000000CFFE7C80 000544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000CFFE8240 000038 (v01 FSC PC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 0x00000000CFFE82C0 000176 (v01 FSC PC 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 0x00000000CFFE8480 00003C (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000CFFE7B80 000084 (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16fffffff]
[ 0.000000] NODE_DATA [mem 0x16fffa000-0x16fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016a600000-ffff88016f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x16fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcffdffff]
[ 0.000000] node 0: [mem 0x100000000-0x16fffffff]
[ 0.000000] On node 0 totalpages: 1310590
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13248 pages used for memmap
[ 0.000000] DMA32 zone: 847840 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 458752 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcffe2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe3000-0xcffeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88016fc00000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1290089
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux cryptdevice=/dev/*** root=/dev/*** ro lang=de locale=de_DE.UTF-8 initrd=../initramfs-linux.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xdff2000000-0xdff3ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 5005832K/5242360K available (5386K kernel code, 896K rwdata, 1712K rodata, 1140K init, 1176K bss, 236528K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 2299.730 MHz processor
[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 4601.10 BogoMIPS (lpj=7665766)
[ 0.000059] pid_max: default: 32768 minimum: 301
[ 0.000083] ACPI: Core revision 20140724
[ 0.004456] ACPI: All ACPI Tables successfully acquired
[ 0.011153] Security Framework initialized
[ 0.011164] Yama: becoming mindful.
[ 0.011976] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.635452] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.637904] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.637916] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.638380] Initializing cgroup subsys memory
[ 0.638390] Initializing cgroup subsys devices
[ 0.638394] Initializing cgroup subsys freezer
[ 0.638398] Initializing cgroup subsys net_cls
[ 0.638402] Initializing cgroup subsys blkio
[ 0.638431] CPU: Physical Processor ID: 0
[ 0.638432] CPU: Processor Core ID: 0
[ 0.638434] mce: CPU supports 6 MCE banks
[ 0.638442] LVT offset 0 assigned for vector 0xf9
[ 0.638446] process: using AMD E400 aware idle routine
[ 0.638450] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.638605] Freeing SMP alternatives memory: 20K (ffffffff819ff000 - ffffffff81a04000)
[ 0.639403] ftrace: allocating 20686 entries in 81 pages
[ 0.650147] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.683144] smpboot: CPU0: AMD Phenom(tm) 9600 Quad-Core Processor (fam: 10, model: 02, stepping: 02)
[ 0.788699] Performance Events: AMD PMU driver.
[ 0.788708] ... version: 0
[ 0.788710] ... bit width: 48
[ 0.788711] ... generic registers: 4
[ 0.788712] ... value mask: 0000ffffffffffff
[ 0.788713] ... max period: 00007fffffffffff
[ 0.788715] ... fixed-purpose events: 0
[ 0.788716] ... event mask: 000000000000000f
[ 0.805377] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.812064] x86: Booting SMP configuration:
[ 0.812066] .... node #0, CPUs: #1 #2 #3
[ 0.855154] x86: Booted up 1 node, 4 CPUs
[ 0.855158] smpboot: Total of 4 processors activated (18405.41 BogoMIPS)
[ 0.857898] devtmpfs: initialized
[ 0.862331] PM: Registering ACPI NVS region [mem 0xcffe0000-0xcffe2fff] (12288 bytes)
[ 0.863630] pinctrl core: initialized pinctrl subsystem
[ 0.863678] RTC time: 15:50:30, date: 12/10/14
[ 0.863785] NET: Registered protocol family 16
[ 0.863940] cpuidle: using governor ladder
[ 0.863943] cpuidle: using governor menu
[ 0.863958] node 0 link 0: io port [c000, ffff]
[ 0.863960] TOM: 00000000d0000000 aka 3328M
[ 0.863963] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.863965] node 0 link 0: mmio [a0000, bffff]
[ 0.863968] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.863970] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.863972] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.863974] TOM2: 0000000170000000 aka 5888M
[ 0.863977] bus: [bus 00-03] on node 0 link 0
[ 0.863978] bus: 00 [io 0x0000-0xffff]
[ 0.863980] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.863981] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.863982] bus: 00 [mem 0xe0400000-0xffffffff]
[ 0.863983] bus: 00 [mem 0xe0100000-0xe03fffff]
[ 0.863984] bus: 00 [mem 0x170000000-0xfcffffffff]
[ 0.864037] ACPI: bus type PCI registered
[ 0.864040] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.864129] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.864133] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.864633] PCI: Using configuration type 1 for base access
[ 0.882471] ACPI: Added _OSI(Module Device)
[ 0.882474] ACPI: Added _OSI(Processor Device)
[ 0.882475] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.882477] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.888093] ACPI: Interpreter enabled
[ 0.888109] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.888115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.888130] ACPI: (supports S0 S3 S4 S5)
[ 0.888134] ACPI: Using IOAPIC for interrupt routing
[ 0.888219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.905658] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.905666] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.905671] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.905943] PCI host bridge to bus 0000:00
[ 0.905947] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.905949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.905952] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.905954] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.905956] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.905958] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
[ 0.905966] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.906068] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.906106] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.906155] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.906204] pci 0000:00:07.0: [1002:7917] type 01 class 0x060400
[ 0.906240] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.906283] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.906345] pci 0000:00:12.0: [1002:4380] type 00 class 0x010601
[ 0.906364] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.906374] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.906384] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.906395] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.906405] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.906415] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.906538] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.906553] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.906656] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.906700] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.906714] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.906815] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.906859] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.906874] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.906978] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.907022] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.907036] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.907137] pci 0000:00:13.3: System wakeup disabled by ACPI
[ 0.907180] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.907195] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.907298] pci 0000:00:13.4: System wakeup disabled by ACPI
[ 0.907347] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.907368] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.907457] pci 0000:00:13.5: supports D1 D2
[ 0.907459] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.907512] pci 0000:00:13.5: System wakeup disabled by ACPI
[ 0.907563] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.907586] pci 0000:00:14.0: reg 0x10: [io 0xfa00-0xfa0f]
[ 0.907738] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.907753] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.907763] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.907773] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.907783] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.907793] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.907816] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.907818] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.907820] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.907822] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.907910] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.907933] pci 0000:00:14.2: reg 0x10: [mem 0xfe020000-0xfe023fff 64bit]
[ 0.908005] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.908052] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.908096] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.908247] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.908325] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.908375] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.908456] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.908529] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.908610] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.908689] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.908817] pci 0000:01:00.0: [10de:0644] type 00 class 0x030000
[ 0.908830] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.908841] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.908852] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.908860] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
[ 0.908867] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.915267] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.915271] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.915274] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.915278] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.915337] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.915355] pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.915380] pci 0000:02:00.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit]
[ 0.915408] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.915496] pci 0000:02:00.0: supports D1 D2
[ 0.915498] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.915555] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.915563] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.915566] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.915569] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.915573] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.915630] pci 0000:03:08.0: [1106:3044] type 00 class 0x0c0010
[ 0.915654] pci 0000:03:08.0: reg 0x10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.915668] pci 0000:03:08.0: reg 0x14: [io 0xcf00-0xcf7f]
[ 0.915766] pci 0000:03:08.0: supports D2
[ 0.915768] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
[ 0.915853] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.915858] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.915862] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.915867] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.915869] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.915872] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.915874] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.915876] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.915878] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.915893] pci_bus 0000:00: on NUMA node 0
[ 0.916019] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916066] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916111] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916157] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916204] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916251] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916302] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.916346] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.917062] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.917221] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.917223] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.917225] vgaarb: loaded
[ 0.917226] vgaarb: bridge control possible 0000:01:00.0
[ 0.917281] PCI: Using ACPI for IRQ routing
[ 0.926614] PCI: pci_cache_line_size set to 64 bytes
[ 0.926672] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.926674] e820: reserve RAM buffer [mem 0xcffe0000-0xcfffffff]
[ 0.926818] NetLabel: Initializing
[ 0.926819] NetLabel: domain hash size = 128
[ 0.926820] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.926833] NetLabel: unlabeled traffic allowed by default
[ 0.926873] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.926877] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.928935] Switched to clocksource hpet
[ 0.938126] pnp: PnP ACPI init
[ 0.938419] pnp 00:00: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.938425] pnp 00:00: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.938466] system 00:00: [io 0x4100-0x411f] has been reserved
[ 0.938470] system 00:00: [io 0x0228-0x022f] has been reserved
[ 0.938473] system 00:00: [io 0x040b] has been reserved
[ 0.938475] system 00:00: [io 0x04d6] has been reserved
[ 0.938477] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 0.938480] system 00:00: [io 0x0c14] has been reserved
[ 0.938482] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 0.938484] system 00:00: [io 0x0c6c-0x0c6d] has been reserved
[ 0.938486] system 00:00: [io 0x0c6f] has been reserved
[ 0.938488] system 00:00: [io 0x0cd0-0x0cd1] has been reserved
[ 0.938491] system 00:00: [io 0x0cd2-0x0cd3] has been reserved
[ 0.938493] system 00:00: [io 0x0cd4-0x0cdf] has been reserved
[ 0.938495] system 00:00: [io 0x4000-0x40fe] could not be reserved
[ 0.938497] system 00:00: [io 0x4210-0x4217] has been reserved
[ 0.938500] system 00:00: [io 0x0b10-0x0b1f] has been reserved
[ 0.938503] system 00:00: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.938508] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.938664] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.938738] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.938740] system 00:02: [io 0x0220-0x0225] has been reserved
[ 0.938742] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.938745] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.939120] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.939385] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.939388] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.939499] system 00:05: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.939501] system 00:05: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.939504] system 00:05: [mem 0xcffe0000-0xcfffffff] could not be reserved
[ 0.939506] system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.939509] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.939512] system 00:05: [mem 0x00100000-0xcffdffff] could not be reserved
[ 0.939514] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.939517] system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.939519] system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.939522] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.939543] pnp: PnP ACPI: found 6 devices
[ 0.946767] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
[ 0.946771] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.946774] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.946778] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.946781] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.946785] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[ 0.946788] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.946790] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.946793] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.946796] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.946800] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.946803] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.946808] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.946813] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.946820] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.946822] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.946824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.946826] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.946828] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.946831] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.946833] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.946835] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.946838] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.946840] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.946842] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.946845] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.946847] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.946849] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.946851] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.946853] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.946855] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.946857] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.946859] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff]
[ 0.946896] NET: Registered protocol family 2
[ 0.947219] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.947580] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.948086] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.948142] TCP: reno registered
[ 0.948156] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.948238] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.948385] NET: Registered protocol family 1
[ 1.345778] pci 0000:01:00.0: Video device with shadowed ROM
[ 1.345792] PCI: CLS 4 bytes, default 64
[ 1.345884] Unpacking initramfs...
[ 1.572970] Freeing initrd memory: 10736K (ffff88007f584000 - ffff880080000000)
[ 1.572989] PCI-DMA: Disabling AGP.
[ 1.573138] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.573141] PCI-DMA: using GART IOMMU.
[ 1.573145] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.577718] microcode: CPU0: patch_level=0x01000065
[ 1.577734] microcode: CPU1: patch_level=0x01000065
[ 1.577751] microcode: CPU2: patch_level=0x01000065
[ 1.577768] microcode: CPU3: patch_level=0x01000065
[ 1.577842] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.577848] LVT offset 1 assigned for vector 0x400
[ 1.577858] IBS: LVT offset 1 assigned
[ 1.577883] perf: AMD IBS detected (0x00000007)
[ 1.577912] Scanning for low memory corruption every 60 seconds
[ 1.578264] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.578298] Initialise system trusted keyring
[ 1.578703] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.580466] zpool: loaded
[ 1.580469] zbud: loaded
[ 1.580670] VFS: Disk quotas dquot_6.5.2
[ 1.580713] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.580874] msgmni has been set to 9926
[ 1.580942] Key type big_key registered
[ 1.581155] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.581219] io scheduler noop registered
[ 1.581222] io scheduler deadline registered
[ 1.581257] io scheduler cfq registered (default)
[ 1.581409] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.581430] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.581523] GHES: HEST is not enabled!
[ 1.581607] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.602290] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.602782] Linux agpgart interface v0.103
[ 1.602842] rtc_cmos 00:01: RTC can wake from S4
[ 1.602980] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.603023] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.603040] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.603180] TCP: cubic registered
[ 1.603302] NET: Registered protocol family 10
[ 1.603605] NET: Registered protocol family 17
[ 1.604009] Loading compiled-in X.509 certificates
[ 1.604027] registered taskstats version 1
[ 1.604420] Magic number: 10:167:841
[ 1.604529] rtc_cmos 00:01: setting system clock to 2014-12-10 15:50:31 UTC (1418226631)
[ 1.604593] PM: Hibernation image not present or could not be loaded.
[ 1.606177] Freeing unused kernel memory: 1140K (ffffffff818e2000 - ffffffff819ff000)
[ 1.606180] Write protecting the kernel read-only data: 8192k
[ 1.608913] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 1.610094] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 1.621306] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 1.639774] [drm] Initialized drm 1.1.0 20060810
[ 1.642988] wmi: Mapper loaded
[ 1.644391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.644398] ACPI: Power Button [PWRB]
[ 1.644494] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.644496] ACPI: Power Button [PWRF]
[ 1.652276] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x096200a1
[ 1.652282] nouveau [ DEVICE][0000:01:00.0] Chipset: G96 (NV96)
[ 1.652284] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 1.652324] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 1.712844] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 1.712846] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 1.713006] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 1.713009] nouveau [ VBIOS][0000:01:00.0] version 62.94.32.00.13
[ 1.733499] nouveau 0000:01:00.0: irq 24 for MSI/MSI-X
[ 1.733509] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 1.733551] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 1.733552] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 1.733554] nouveau [ PFB][0000:01:00.0] ZCOMP: 2048 tags
[ 1.762727] nouveau [ PTHERM][0000:01:00.0] FAN control: PWM
[ 1.762743] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 1.762775] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 1.762787] nouveau [ CLK][0000:01:00.0] 0f: core 550 MHz shader 1375 MHz memory 510 MHz
[ 1.762847] nouveau [ CLK][0000:01:00.0] --: core 400 MHz shader 800 MHz memory 499 MHz
[ 1.763098] [TTM] Zone kernel: Available graphics memory: 2542382 kiB
[ 1.763103] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.763105] [TTM] Initializing pool allocator
[ 1.763112] [TTM] Initializing DMA pool allocator
[ 1.763136] nouveau [ DRM] VRAM: 512 MiB
[ 1.763138] nouveau [ DRM] GART: 1048576 MiB
[ 1.763145] nouveau [ DRM] TMDS table version 2.0
[ 1.763147] nouveau [ DRM] DCB version 4.0
[ 1.763150] nouveau [ DRM] DCB outp 00: 04000310 00000028
[ 1.763152] nouveau [ DRM] DCB outp 01: 01011302 00000030
[ 1.763154] nouveau [ DRM] DCB outp 02: 02011300 00000028
[ 1.763155] nouveau [ DRM] DCB outp 03: 02022332 00020010
[ 1.763157] nouveau [ DRM] DCB conn 00: 00000000
[ 1.763160] nouveau [ DRM] DCB conn 01: 00001130
[ 1.763161] nouveau [ DRM] DCB conn 02: 00002261
[ 1.771552] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.771553] [drm] Driver supports precise vblank timestamp query.
[ 1.795486] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 1.863157] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff8800cf89f000
[ 1.863259] fbcon: nouveaufb (fb0) is primary device
[ 1.933281] Console: switching to colour frame buffer device 160x64
[ 1.934920] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 1.934922] nouveau 0000:01:00.0: registered panic notifier
[ 1.958349] [drm] Initialized nouveau 1.2.0 20120801 for 0000:01:00.0 on minor 0
[ 1.974668] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.975212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.975252] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.985612] ACPI: bus type USB registered
[ 1.985661] usbcore: registered new interface driver usbfs
[ 1.985675] usbcore: registered new interface driver hub
[ 1.986962] usbcore: registered new device driver usb
[ 1.988016] SCSI subsystem initialized
[ 1.988361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.989167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.989634] ohci-pci: OHCI PCI platform driver
[ 1.989875] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.989887] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 1.989941] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.991594] ehci-pci: EHCI PCI platform driver
[ 1.991927] libata version 3.00 loaded.
[ 2.045921] hub 1-0:1.0: USB hub found
[ 2.045936] hub 1-0:1.0: 2 ports detected
[ 2.046276] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 2.046284] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 2.046334] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 2.055002] firewire_ohci 0000:03:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 2.102516] hub 2-0:1.0: USB hub found
[ 2.102529] hub 2-0:1.0: 2 ports detected
[ 2.102809] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 2.102816] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 2.102859] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 2.159073] hub 3-0:1.0: USB hub found
[ 2.159083] hub 3-0:1.0: 2 ports detected
[ 2.159303] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 2.159308] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 4
[ 2.159330] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 2.215702] hub 4-0:1.0: USB hub found
[ 2.215711] hub 4-0:1.0: 2 ports detected
[ 2.215926] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 2.215934] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 5
[ 2.215956] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 2.272342] hub 5-0:1.0: USB hub found
[ 2.272352] hub 5-0:1.0: 2 ports detected
[ 2.374764] usb 1-1: new low-speed USB device number 2 using ohci-pci
[ 2.554713] firewire_core 0000:03:08.0: created device fw0: GUID ***, S400
[ 2.577972] tsc: Refined TSC clocksource calibration: 2299.739 MHz
[ 2.661257] usb 1-2: new low-speed USB device number 3 using ohci-pci
[ 2.824373] usb 1-1: USB disconnect, device number 2
[ 2.824572] usb 1-2: USB disconnect, device number 3
[ 2.951070] usb 2-2: new full-speed USB device number 2 using ohci-pci
[ 3.109017] usb 2-2: USB disconnect, device number 2
[ 3.112541] usbcore: registered new interface driver usb-storage
[ 3.113170] usbcore: registered new interface driver uas
[ 3.237572] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 3.492151] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 3.492346] scsi host0: usb-storage 3-1:1.0
[ 3.492644] usb 3-1: USB disconnect, device number 2
[ 3.577458] Switched to clocksource tsc
[ 3.607525] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 3.607534] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 6
[ 3.607541] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 3.607559] ehci-pci 0000:00:13.5: debug port 1
[ 3.607617] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 3.617327] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 3.617520] hub 6-0:1.0: USB hub found
[ 3.617529] hub 6-0:1.0: 10 ports detected
[ 3.674007] hub 1-0:1.0: USB hub found
[ 3.674017] hub 1-0:1.0: 2 ports detected
[ 3.675682] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.676639] usbcore: registered new interface driver usbhid
[ 3.676642] usbhid: USB HID core driver
[ 3.730716] hub 2-0:1.0: USB hub found
[ 3.730736] hub 2-0:1.0: 2 ports detected
[ 3.787273] hub 3-0:1.0: USB hub found
[ 3.787283] hub 3-0:1.0: 2 ports detected
[ 3.843958] hub 4-0:1.0: USB hub found
[ 3.843973] hub 4-0:1.0: 2 ports detected
[ 3.900540] hub 5-0:1.0: USB hub found
[ 3.900550] hub 5-0:1.0: 2 ports detected
[ 3.901839] scsi host1: pata_atiixp
[ 3.901988] scsi host2: pata_atiixp
[ 3.902043] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 3.902045] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 3.902096] ahci 0000:00:12.0: version 3.0
[ 3.902292] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.902392] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.902396] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 3.903177] scsi host3: ahci
[ 3.903349] scsi host4: ahci
[ 3.903488] scsi host5: ahci
[ 3.903604] scsi host6: ahci
[ 3.903668] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 16
[ 3.903672] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 16
[ 3.903675] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 16
[ 3.903678] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 16
[ 4.286943] usb 6-5: new high-speed USB device number 5 using ehci-pci
[ 4.386868] ata3: softreset failed (device not ready)
[ 4.386891] ata3: applying PMP SRST workaround and retrying
[ 4.386908] ata4: softreset failed (device not ready)
[ 4.386932] ata4: applying PMP SRST workaround and retrying
[ 4.390205] ata6: softreset failed (device not ready)
[ 4.390215] ata6: applying PMP SRST workaround and retrying
[ 4.393529] ata5: softreset failed (device not ready)
[ 4.393539] ata5: applying PMP SRST workaround and retrying
[ 4.504368] usb-storage 6-5:1.0: USB Mass Storage device detected
[ 4.504497] scsi host7: usb-storage 6-5:1.0
[ 4.553444] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.553481] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.556772] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.557383] ata6.00: ATAPI: TSSTcorp CDDVDW TS-H653B, FS01, max UDMA/100
[ 4.557387] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.558304] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.558306] ata6.00: configured for UDMA/100
[ 4.560106] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.563451] ata5.00: ATAPI: Optiarc DVD-ROM DDU1671S, 1.81, max UDMA/33
[ 4.563454] ata5.00: applying bridge limits
[ 4.563455] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.564806] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.564808] ata5.00: configured for UDMA/33
[ 4.568901] ata3.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
[ 4.568903] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.568906] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.569792] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.569794] ata3.00: configured for UDMA/133
[ 4.569985] scsi 3:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 3E01 PQ: 0 ANSI: 5
[ 4.585273] ata4.00: ATA-8: WDC WD5000AAKS-07YGA0, 12.01C02, max UDMA/133
[ 4.585275] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.585278] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.586189] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 4.586190] ata4.00: configured for UDMA/133
[ 4.586273] scsi 4:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1C02 PQ: 0 ANSI: 5
[ 4.590166] scsi 5:0:0:0: CD-ROM Optiarc DVD-ROM DDU1671S 1.81 PQ: 0 ANSI: 5
[ 4.604294] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653B FS01 PQ: 0 ANSI: 5
[ 4.634464] sr 5:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[ 4.634471] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.634659] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.645432] sr 6:0:0:0: [sr1] scsi3-mmc drive: 48x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.645561] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.666988] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.667004] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.667056] sd 4:0:0:0: [sdb] Write Protect is off
[ 4.667059] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.667076] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.667151] sd 3:0:0:0: [sda] Write Protect is off
[ 4.667154] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.667174] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.669809] sda: sda1 sda2
[ 4.670185] sd 3:0:0:0: [sda] Attached SCSI disk
[ 4.672581] sdb: sdb1 sdb2 sdb3
[ 4.672910] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 4.989877] floppy0: no floppy controllers found
[ 5.023634] device-mapper: uevent: version 1.0.3
[ 5.023779] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 5.116443] usb 1-1: new low-speed USB device number 4 using ohci-pci
[ 5.286622] input: HID 04d9:1133 as /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0/0003:04D9:1133.0001/input/input4
[ 5.286710] hid-generic 0003:04D9:1133.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1133] on usb-0000:00:13.0-1/input0
[ 5.532844] usb 1-2: new low-speed USB device number 5 using ohci-pci
[ 5.537022] scsi 7:0:0:0: Direct-Access Generic 2.0 Reader -0 1.20 PQ: 0 ANSI: 0 CCS
[ 5.567480] scsi 7:0:0:1: Direct-Access Generic 2.0 Reader -1 1.20 PQ: 0 ANSI: 0 CCS
[ 5.597960] scsi 7:0:0:2: Direct-Access Generic 2.0 Reader -2 1.20 PQ: 0 ANSI: 0 CCS
[ 5.628447] scsi 7:0:0:3: Direct-Access Generic 2.0 Reader -3 1.20 PQ: 0 ANSI: 0 CCS
[ 5.658931] scsi 7:0:0:4: Direct-Access Generic 2.0 Reader -4 1.20 PQ: 0 ANSI: 0 CCS
[ 5.701234] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/0003:046D:C312.0002/input/input5
[ 5.701330] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0
[ 5.711917] sd 7:0:0:2: [sde] Attached SCSI removable disk
[ 5.713919] sd 7:0:0:4: [sdg] Attached SCSI removable disk
[ 5.714789] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 5.715784] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 5.716655] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[ 5.949263] usb 2-2: new full-speed USB device number 3 using ohci-pci
[ 6.106418] usb-storage 2-2:1.2: USB Mass Storage device detected
[ 6.106587] scsi host8: usb-storage 2-2:1.2
[ 7.123626] scsi 8:0:0:0: Direct-Access Drucker *** 1.00 PQ: 0 ANSI: 2
[ 7.213554] sd 8:0:0:0: [sdh] Attached SCSI removable disk
[ 14.754935] random: nonblocking pool is initialized
[ 40.324579] NET: Registered protocol family 38
[ 41.527903] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 42.188673] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 42.188936] systemd[1]: Detected architecture 'x86-64'.
[ 42.228977] systemd[1]: Set hostname to <***>.
[ 43.178585] systemd[1]: Cannot add dependency job for unit acpid.socket, ignoring: Unit acpid.socket failed to load: No such file or directory.
[ 43.178690] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 43.179300] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 43.179397] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 43.179418] systemd[1]: Starting Remote File Systems.
[ 43.179755] systemd[1]: Reached target Remote File Systems.
[ 43.179773] systemd[1]: Starting Encrypted Volumes.
[ 43.180056] systemd[1]: Reached target Encrypted Volumes.
[ 43.180096] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 43.180487] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 43.180516] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 43.180561] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 43.180580] systemd[1]: Expecting device dev-disk-by\***.device...
[ 43.180873] systemd[1]: Expecting device dev-disk-by\***.device...
[ 43.181155] systemd[1]: Expecting device dev-disk-by\***.device...
[ 43.181432] systemd[1]: Starting Root Slice.
[ 43.192545] systemd[1]: Created slice Root Slice.
[ 43.192577] systemd[1]: Starting User and Session Slice.
[ 43.193088] systemd[1]: Created slice User and Session Slice.
[ 43.193106] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 43.193459] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 43.193472] systemd[1]: Starting Delayed Shutdown Socket.
[ 43.193795] systemd[1]: Listening on Delayed Shutdown Socket.
[ 43.193808] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 43.194108] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 43.194124] systemd[1]: Starting Journal Socket (/dev/log).
[ 43.194431] systemd[1]: Listening on Journal Socket (/dev/log).
[ 43.194445] systemd[1]: Starting LVM2 metadata daemon socket.
[ 43.194742] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 43.194764] systemd[1]: Starting udev Control Socket.
[ 43.195075] systemd[1]: Listening on udev Control Socket.
[ 43.195092] systemd[1]: Starting udev Kernel Socket.
[ 43.195382] systemd[1]: Listening on udev Kernel Socket.
[ 43.195414] systemd[1]: Starting Journal Socket.
[ 43.195735] systemd[1]: Listening on Journal Socket.
[ 43.195779] systemd[1]: Starting System Slice.
[ 43.196304] systemd[1]: Created slice System Slice.
[ 43.196328] systemd[1]: Starting system-getty.slice.
[ 43.196796] systemd[1]: Created slice system-getty.slice.
[ 43.196833] systemd[1]: Started File System Check on Root Device.
[ 43.196843] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 43.197281] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 43.204278] systemd[1]: Mounting Temporary Directory...
[ 43.213398] systemd[1]: Starting udev Coldplug all Devices...
[ 43.267732] systemd[1]: Started Set Up Additional Binary Formats.
[ 43.287248] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 43.289512] systemd[1]: Started Load Kernel Modules.
[ 43.289624] systemd[1]: Mounting Configuration File System...
[ 43.290673] systemd[1]: Mounted FUSE Control File System.
[ 43.290730] systemd[1]: Starting Apply Kernel Variables...
[ 43.291877] systemd[1]: Mounting Huge Pages File System...
[ 43.292941] systemd[1]: Starting Setup Virtual Console...
[ 43.294223] systemd[1]: Mounting Debug File System...
[ 43.295344] systemd[1]: Mounting POSIX Message Queue File System...
[ 43.296492] systemd[1]: Starting Journal Service...
[ 43.297719] systemd[1]: Starting Slices.
[ 43.298054] systemd[1]: Reached target Slices.
[ 43.298117] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 43.369586] systemd[1]: Started udev Coldplug all Devices.
[ 43.375543] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 43.767545] systemd[1]: Mounted POSIX Message Queue File System.
[ 43.767872] systemd[1]: Mounted Huge Pages File System.
[ 43.768160] systemd[1]: Mounted Configuration File System.
[ 43.768430] systemd[1]: Mounted Temporary Directory.
[ 43.777204] systemd[1]: Mounted Debug File System.
[ 43.818406] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
[ 43.819552] systemd[1]: Started Remount Root and Kernel File Systems.
[ 43.819696] systemd[1]: Starting Load/Save Random Seed...
[ 44.077875] systemd[1]: Started Rebuild Hardware Database.
[ 44.077961] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 44.077992] systemd[1]: Started First Boot Wizard.
[ 44.078014] systemd[1]: Started Create System Users.
[ 44.078127] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 44.080556] systemd[1]: Started Apply Kernel Variables.
[ 44.081189] systemd[1]: Started Load/Save Random Seed.
[ 44.396344] systemd[1]: Started Create Static Device Nodes in /dev.
[ 44.397391] systemd[1]: Starting udev Kernel Device Manager...
[ 44.398550] systemd[1]: Starting Local File Systems (Pre).
[ 44.398854] systemd[1]: Reached target Local File Systems (Pre).
[ 44.911123] systemd[1]: Started Setup Virtual Console.
[ 45.169671] systemd[1]: Started udev Kernel Device Manager.
[ 45.568594] acpi-cpufreq: overriding BIOS provided _PSD data
[ 45.682931] ACPI: [Package] has zero elements (ffff8800cf8a2780)
[ 45.683376] ACPI: Invalid passive threshold
[ 45.683756] thermal LNXTHERM:00: registered as thermal_zone0
[ 45.683760] ACPI: Thermal Zone [THRM] (40 C)
[ 45.769634] ACPI: Fan [FAN] (on)
[ 45.826411] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.873088] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfa00, revision 0
[ 45.873150] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[ 46.091918] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 46.092069] sp5100_tco: PCI Revision ID: 0x14
[ 46.092098] sp5100_tco: failed to find MMIO address, giving up.
[ 46.122981] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 46.123013] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 46.123326] r8169 0000:02:00.0: irq 25 for MSI/MSI-X
[ 46.123693] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90000c74000, ***, XID 18000000 IRQ 25
[ 46.123700] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 46.141989] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 46.204302] MCE: In-kernel MCE decoding enabled.
[ 46.282768] kvm: Nested Virtualization enabled
[ 46.282779] kvm: Nested Paging enabled
[ 46.284475] EDAC MC: Ver: 3.0.0
[ 46.381415] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 46.393075] ppdev: user-space parallel port driver
[ 46.482542] sound hdaudioC0D3: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 46.482550] sound hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 46.482556] sound hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 46.482560] sound hdaudioC0D3: mono: mono_out=0x0
[ 46.482564] sound hdaudioC0D3: dig-out=0x1e/0x0
[ 46.482567] sound hdaudioC0D3: inputs:
[ 46.482572] sound hdaudioC0D3: Front Mic=0x19
[ 46.482577] sound hdaudioC0D3: Rear Mic=0x18
[ 46.482580] sound hdaudioC0D3: Line=0x1a
[ 46.510384] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/hdaudioC0D3/input8
[ 46.514291] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 46.514463] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 46.514617] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 46.514770] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 46.515107] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 46.515288] AMD64 EDAC driver v3.4.0
[ 46.515332] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 46.515373] EDAC amd64: DRAM ECC disabled.
[ 46.515391] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 46.515751] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 46.515909] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 46.661963] usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x*** pid 0x***
[ 46.662025] usbcore: registered new interface driver usblp
[ 46.674357] r8169 0000:02:00.0 ***: renamed from eth0
[ 46.810897] mousedev: PS/2 mouse device common for all mice
[ 47.406668] systemd[1]: Cannot add dependency job for unit acpid.socket, ignoring: Invalid argument
[ 47.448328] systemd[1]: Found device WDC_WD3200AAKS-75L9A0 boot.
[ 47.451087] systemd[1]: Found device /dev/disk/by-uuid/***.
[ 47.452595] systemd[1]: Found device /dev/disk/by-uuid/***.
[ 47.452705] systemd[1]: Starting system-lvm2\x2dpvscan.slice.
[ 47.453662] systemd[1]: Created slice system-lvm2\x2dpvscan.slice.
[ 47.453688] systemd[1]: Starting LVM2 PV scan on device 254:0...
[ 47.455096] systemd[1]: Starting Sound Card.
[ 47.455621] systemd[1]: Reached target Sound Card.
[ 47.455717] systemd[1]: Started First Boot Wizard.
[ 47.455796] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 47.455828] systemd[1]: Started Create System Users.
[ 47.456127] systemd[1]: Started Load Kernel Modules.
[ 47.456161] systemd[1]: Mounted FUSE Control File System.
[ 47.456228] systemd[1]: Started Set Up Additional Binary Formats.
[ 47.456273] systemd[1]: Started Rebuild Hardware Database.
[ 47.456298] systemd[1]: Activating swap /dev/disk/by-uuid/***...
[ 47.457500] systemd[1]: Started File System Check on Root Device.
[ 47.457567] systemd[1]: Starting File System Check on /dev/disk/by-uuid/***...
[ 47.458978] systemd[1]: Starting File System Check on /dev/disk/by-uuid/***...
[ 47.539095] Adding ***k swap on /dev/*** Priority:-1 extents:1 across:***k FS
[ 47.543003] systemd[1]: Activated swap /dev/disk/by-uuid/***.
[ 47.545239] systemd[1]: Starting Swap.
[ 47.545897] systemd[1]: Reached target Swap.
[ 47.657584] systemd[1]: Starting LVM2 metadata daemon...
[ 47.660322] systemd[1]: Started LVM2 metadata daemon.
[ 48.537608] systemd[1]: Started File System Check on /dev/disk/by-uuid/***.
[ 48.537856] systemd[1]: Mounting /boot...
[ 48.676913] floppy0: no floppy controllers found
[ 48.728877] systemd[1]: Started File System Check on /dev/disk/by-uuid/***.
[ 48.732707] systemd[1]: Mounting /home...
[ 48.854090] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 48.855389] systemd[1]: Mounted /boot.
[ 48.969192] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 48.970514] systemd[1]: Mounted /home.
[ 48.970967] systemd[1]: Starting Local File Systems.
[ 48.971627] systemd[1]: Reached target Local File Systems.
[ 48.971697] systemd[1]: Started Rebuild Journal Catalog.
[ 48.971778] systemd[1]: Started Update is Completed.
[ 49.094331] systemd[1]: Started Journal Service.
[ 49.358471] systemd-journald[231]: Received request to flush runtime journal from PID 1
[ 50.244763] microcode: CPU0: new patch_level=0x01000083
[ 50.244789] microcode: CPU1: new patch_level=0x01000083
[ 50.244810] microcode: CPU2: new patch_level=0x01000083
[ 50.244842] microcode: CPU3: new patch_level=0x01000083
[ 52.947764] cfg80211: Calling CRDA to update world regulatory domain
[ 54.018328] r8169 0000:02:00.0 ***: link down
[ 54.018450] IPv6: ADDRCONF(NETDEV_UP): ***: link is not ready
[ 54.023278] r8169 0000:02:00.0 ***: link down
[ 56.097362] r8169 0000:02:00.0 ***: link up
[ 56.097385] IPv6: ADDRCONF(NETDEV_CHANGE): ***: link becomes ready
[ 56.312786] Bridge firewalling registered
[ 56.475580] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.564420] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 6307.781942] kvm: enabling virtualization on CPU2 failed
[ 6307.781949] kvm: enabling virtualization on CPU1 failed
[ 6307.781955] kvm: enabling virtualization on CPU3 failed
[ 6307.781978] kvm: enabling virtualization on CPU0 failed
[ 6378.500103] kvm: enabling virtualization on CPU1 failed
[ 6378.500108] kvm: enabling virtualization on CPU2 failed
[ 6378.500113] kvm: enabling virtualization on CPU3 failed
[ 6378.500131] kvm: enabling virtualization on CPU0 failed
Was meint ihr; ob da noch was zu reißen ist? An welcher Stelle ließe sich ansetzen?
Gruß, k.osmo
(edit) private Daten
(edit2) Northbridge korrigiert, (lscpu) und (flags) ergänzt