hi,
ich habe ein problem mit meinem cpu luefter. dieser dreht etwas schnell und ist so auch relativ laut. ich wuerde ihn daher etwas herabregeln.
dazu habe ich lm_sensors installiert.
folgendes habe ich versucht
% sensors-detect
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# Board: ASUSTeK Computer INC. P6T SE
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Winbond W83667HG Super IO Sensors' Success!
(address 0x290, driver `w83627ehf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH10
Module i2c-dev loaded successfully.
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x94 (i2c-4)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x95 (i2c-5)
Do you want to scan it? (yes/NO/selectively): YES
Next adapter: Radeon i2c bit bus 0x96 (i2c-6)
Do you want to scan it? (yes/NO/selectively): yes
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627ehf':
* ISA bus, address 0x290
Chip `Winbond W83667HG Super IO Sensors' (confidence: 9)
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to generate /etc/conf.d/lm_sensors? (YES/no): YES
Created symlink from /etc/systemd/system/multi-user.target.wants/lm_sensors.service to /usr/lib/systemd/system/lm_sensors.service.
Unloading i2c-dev... OK
Unloading cpuid... OK
an dieser stelle auch eine ubersicht, was laeuft
% sensors -u
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:
in0_input: 0.936
in0_min: 0.800
in0_max: 1.600
+3.3 Voltage:
in1_input: 3.344
in1_min: 2.970
in1_max: 3.630
+5 Voltage:
in2_input: 5.094
in2_min: 4.500
in2_max: 5.500
+12 Voltage:
in3_input: 11.969
in3_min: 10.200
in3_max: 13.800
CPU FAN Speed:
fan1_input: 1757.000
fan1_min: 600.000
fan1_max: 7200.000
CHASSIS1 FAN Speed:
fan2_input: 0.000
fan2_min: 600.000
fan2_max: 7200.000
CHASSIS2 FAN Speed:
fan3_input: 0.000
fan3_min: 600.000
fan3_max: 7200.000
POWER FAN Speed:
fan4_input: 0.000
fan4_min: 0.000
fan4_max: 7200.000
CPU Temperature:
temp1_input: 35.500
temp1_max: 60.000
temp1_crit: 75.000
MB Temperature:
temp2_input: 34.000
temp2_max: 45.000
temp2_crit: 75.000
coretemp-isa-0000
Adapter: ISA adapter
Core 0:
temp2_input: 39.000
temp2_max: 80.000
temp2_crit: 100.000
temp2_crit_alarm: 0.000
Core 1:
temp3_input: 32.000
temp3_max: 80.000
temp3_crit: 100.000
temp3_crit_alarm: 0.000
Core 2:
temp4_input: 37.000
temp4_max: 80.000
temp4_crit: 100.000
temp4_crit_alarm: 0.000
Core 3:
temp5_input: 34.000
temp5_max: 80.000
temp5_crit: 100.000
temp5_crit_alarm: 0.000
radeon-pci-0200
Adapter: PCI adapter
temp1:
temp1_input: 47.000
temp1_crit: 120.000
temp1_crit_hyst: 90.000
aendern moechte ich gerne
CPU FAN Speed:
fan1_input: 1757.000
fan1_min: 600.000
fan1_max: 7200.0008
gemaess arch wiki habe ich pwmconfig versucht
% pwmconfig
# pwmconfig revision 6166 (2013-05-01)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
hier weiss ich leider nicht was das problem ist.
coretemp ist geladen
% lsmod | grep core
coretemp 12820 0
i2c_core 50152 6 drm,i2c_i801,i2c_dev,drm_kms_helper,i2c_algo_bit,radeon
soundcore 13031 2 snd,snd_hda_codec
i7core_edac 22278 0
edac_core 51366 2 i7core_edac
hwmon 12930 3 asus_atk0110,coretemp,radeon
firewire_core 56700 1 firewire_ohci
crc_itu_t 12347 1 firewire_core
usbcore 199328 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
usb_common 12440 1 usbcore
weiss hier jemand eine loesung?
danke und liebe gruesse :-)