So, nun habe ich mal ein Problem mit dem fglrx Treiber. Ich benutze den "Beta" treiber. Meine Probleme fingen bei der Systemaktualisierung an, wo es einen konflikt zwischen dem catalyst-utils und dem mesa-libgl gab. Nach langem hin und her habe ich den catalyst-utils entfernt dann den mesa-libgl installiert ein Syu gemacht und versucht den catalyst wieder zu Installieren.Hier mal meine Xorg.0.log :
[ 12.385]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 12.385] X Protocol Version 11, Revision 0
[ 12.385] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 12.385] Current Operating System: Linux arch 3.10.10-1-ARCH #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013 x86_64
[ 12.385] Kernel command line: root=/dev/sda1 ro nomodeset initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 12.385] Build Date: 01 July 2013 10:48:42AM
[ 12.385]
[ 12.385] Current version of pixman: 0.30.2
[ 12.385] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.386] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.386] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 7 21:28:41 2013
[ 12.463] (==) Using config file: "/etc/X11/xorg.conf"
[ 12.463] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.463] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.492] (==) ServerLayout "aticonfig Layout"
[ 12.492] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 12.492] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 12.492] (**) | |-->Device "aticonfig-Device[0]-0"
[ 12.492] (==) Automatically adding devices
[ 12.492] (==) Automatically enabling devices
[ 12.492] (==) Automatically adding GPU devices
[ 12.759] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.759] Entry deleted from font path.
[ 12.759] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.759] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.759] Entry deleted from font path.
[ 12.760] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.760] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 12.760] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.760] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.777] (II) Loader magic: 0x7fdc20
[ 12.777] (II) Module ABI versions:
[ 12.777] X.Org ANSI C Emulation: 0.4
[ 12.777] X.Org Video Driver: 14.1
[ 12.777] X.Org XInput driver : 19.1
[ 12.777] X.Org Server Extension : 7.0
[ 12.779] (--) PCI:*(0:1:0:0) 1002:68bf:174b:e176 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 12.780] Initializing built-in extension Generic Event Extension
[ 12.780] Initializing built-in extension SHAPE
[ 12.780] Initializing built-in extension MIT-SHM
[ 12.780] Initializing built-in extension XInputExtension
[ 12.780] Initializing built-in extension XTEST
[ 12.780] Initializing built-in extension BIG-REQUESTS
[ 12.780] Initializing built-in extension SYNC
[ 12.780] Initializing built-in extension XKEYBOARD
[ 12.780] Initializing built-in extension XC-MISC
[ 12.780] Initializing built-in extension SECURITY
[ 12.780] Initializing built-in extension XINERAMA
[ 12.780] Initializing built-in extension XFIXES
[ 12.780] Initializing built-in extension RENDER
[ 12.780] Initializing built-in extension RANDR
[ 12.780] Initializing built-in extension COMPOSITE
[ 12.780] Initializing built-in extension DAMAGE
[ 12.780] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.780] Initializing built-in extension DOUBLE-BUFFER
[ 12.780] Initializing built-in extension RECORD
[ 12.780] Initializing built-in extension DPMS
[ 12.780] Initializing built-in extension X-Resource
[ 12.780] Initializing built-in extension XVideo
[ 12.780] Initializing built-in extension XVideo-MotionCompensation
[ 12.780] Initializing built-in extension XFree86-VidModeExtension
[ 12.780] Initializing built-in extension XFree86-DGA
[ 12.780] Initializing built-in extension XFree86-DRI
[ 12.780] Initializing built-in extension DRI2
[ 12.781] (II) "glx" will be loaded by default.
[ 12.781] (II) LoadModule: "glx"
[ 13.002] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.024] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 13.024] compiled for 6.9.0, module version = 1.0.0
[ 13.025] Loading extension GLX
[ 13.025] (II) LoadModule: "fglrx"
[ 13.025] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 13.725] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 13.725] compiled for 1.4.99.906, module version = 13.20.5
[ 13.725] Module class: X.Org Video Driver
[ 13.751] (II) Loading sub module "fglrxdrm"
[ 13.751] (II) LoadModule: "fglrxdrm"
[ 13.751] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 13.900] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 13.900] compiled for 1.4.99.906, module version = 13.20.5
[ 13.900] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5
[ 13.900] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11
[ 13.900] (II) AMD Proprietary Linux Driver Build Date: Aug 15 2013 07:30:53
[ 13.900] (++) using VT number 7
[ 13.903] (WW) Falling back to old probe method for fglrx
[ 14.222] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 14.416] ukiDynamicMajor: failed to open /proc/ati/major
[ 14.416] ukiDynamicMajor: failed to open /proc/ati/major
[ 14.470] (--) Chipset Supported AMD Graphics Processor (0x68BF) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 14.507] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 14.513] (II) fglrx(0): pEnt->device->identifier=0x1c9ab70
[ 14.514] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 14.514] (II) Loading sub module "vgahw"
[ 14.514] (II) LoadModule: "vgahw"
[ 14.514] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 14.526] (II) Module vgahw: vendor="X.Org Foundation"
[ 14.526] compiled for 1.14.2, module version = 0.1.0
[ 14.526] ABI class: X.Org Video Driver, version 14.1
[ 14.527] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 14.527] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 14.527] (==) fglrx(0): Default visual is TrueColor
[ 14.527] (**) fglrx(0): Option "DPMS" "true"
[ 14.527] (==) fglrx(0): RGB weight 888
[ 14.527] (II) fglrx(0): Using 8 bits per RGB
[ 14.527] (==) fglrx(0): Buffer Tiling is ON
[ 14.528] (II) Loading sub module "fglrxdrm"
[ 14.528] (II) LoadModule: "fglrxdrm"
[ 14.528] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 14.528] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 14.528] compiled for 1.4.99.906, module version = 13.20.5
[ 14.593] ukiDynamicMajor: failed to open /proc/ati/major
[ 14.593] ukiDynamicMajor: failed to open /proc/ati/major
[ 14.594] (**) fglrx(0): NoAccel = NO
[ 14.594] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 14.594] (--) fglrx(0): Chipset: "AMD Radeon HD 6700 Series " (Chipset = 0x68bf)
[ 14.594] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe176)
[ 14.594] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 14.594] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 14.594] (--) fglrx(0): MMIO registers at 0xfebe0000
[ 14.594] (--) fglrx(0): I/O port at 0x0000d000
[ 14.594] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 14.869] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 15.041] (II) Loading sub module "vbe"
[ 15.041] (II) LoadModule: "vbe"
[ 15.041] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 15.092] (II) Module vbe: vendor="X.Org Foundation"
[ 15.092] compiled for 1.14.2, module version = 1.1.0
[ 15.092] ABI class: X.Org Video Driver, version 14.1
[ 15.116] (II) fglrx(0): VESA BIOS detected
[ 15.116] (II) fglrx(0): VESA VBE Version 3.0
[ 15.116] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 15.116] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 15.116] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 15.116] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 15.116] (II) fglrx(0): VESA VBE OEM Product: JUNIPER
[ 15.116] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 15.151] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 15.151] (--) fglrx(0): Video RAM: 2097152 kByte, Type: DDR3
[ 15.151] (II) fglrx(0): PCIE card detected
[ 15.151] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 15.151] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 15.151] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x80000000)
[ 15.151] (II) fglrx(0): RandR 1.2 support is enabled!
[ 15.151] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 15.151] (==) fglrx(0): Center Mode is disabled
[ 15.151] (II) Loading sub module "fb"
[ 15.151] (II) LoadModule: "fb"
[ 15.164] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.236] (II) Module fb: vendor="X.Org Foundation"
[ 15.236] compiled for 1.14.2, module version = 1.0.0
[ 15.236] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.236] (II) Loading sub module "ddc"
[ 15.236] (II) LoadModule: "ddc"
[ 15.236] (II) Module "ddc" already built-in
[ 16.972] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 16.973] (II) fglrx(0): Output DFP2 has no monitor section
[ 16.973] (II) fglrx(0): Output CRT1 has no monitor section
[ 16.973] (II) fglrx(0): Output CRT2 has no monitor section
[ 16.973] (II) Loading sub module "ddc"
[ 16.973] (II) LoadModule: "ddc"
[ 16.973] (II) Module "ddc" already built-in
[ 16.973] (II) fglrx(0): Connected Display0: CRT2
[ 16.973] (II) fglrx(0): Display0 EDID data ---------------------------
[ 16.973] (II) fglrx(0): Manufacturer: YUK Model: 4b2 Serial#: 3514
[ 16.973] (II) fglrx(0): Year: 2008 Week: 23
[ 16.973] (II) fglrx(0): EDID Version: 1.3
[ 16.973] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 16.973] (II) fglrx(0): Sync: Separate
[ 16.973] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 21
[ 16.973] (II) fglrx(0): Gamma: 2.20
[ 16.973] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 16.973] (II) fglrx(0): First detailed timing is preferred mode
[ 16.973] (II) fglrx(0): redX: 0.653 redY: 0.325 greenX: 0.300 greenY: 0.596
[ 16.973] (II) fglrx(0): blueX: 0.143 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
[ 16.973] (II) fglrx(0): Supported established timings:
[ 16.973] (II) fglrx(0): 720x400@70Hz
[ 16.973] (II) fglrx(0): 640x480@60Hz
[ 16.973] (II) fglrx(0): 640x480@67Hz
[ 16.973] (II) fglrx(0): 640x480@72Hz
[ 16.973] (II) fglrx(0): 640x480@75Hz
[ 16.973] (II) fglrx(0): 800x600@56Hz
[ 16.973] (II) fglrx(0): 800x600@60Hz
[ 16.973] (II) fglrx(0): 800x600@72Hz
[ 16.974] (II) fglrx(0): 800x600@75Hz
[ 16.974] (II) fglrx(0): 832x624@75Hz
[ 16.974] (II) fglrx(0): Manufacturer's mask: 0
[ 16.974] (II) fglrx(0): Supported standard timings:
[ 16.974] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 16.974] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 75 vid: 53121
[ 16.974] (II) fglrx(0): Supported detailed timing:
[ 16.974] (II) fglrx(0): clock: 74.5 MHz Image Size: 372 x 210 mm
[ 16.974] (II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0
[ 16.974] (II) fglrx(0): v_active: 720 v_sync: 723 v_sync_end 728 v_blanking: 748 v_border: 0
[ 16.974] (II) fglrx(0): Serial No: 7823TG003514
[ 16.974] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 105 MHz
[ 16.974] (II) fglrx(0): Monitor name: YV17WB2
[ 16.974] (II) fglrx(0): EDID (in hex):
[ 16.974] (II) fglrx(0): 00ffffffffffff0066abb204ba0d0000
[ 16.974] (II) fglrx(0): 17120103682515782a5e95a7534c9824
[ 16.974] (II) fglrx(0): 145054bfe00081c081cf010101010101
[ 16.974] (II) fglrx(0): 0101010101011a1d008051d01c204080
[ 16.974] (II) fglrx(0): 350074d21000001c000000ff00373832
[ 16.974] (II) fglrx(0): 3354473030333531340a000000fd0032
[ 16.974] (II) fglrx(0): 4b1e530a000a202020202020000000fc
[ 16.974] (II) fglrx(0): 00595631375742320a202020202000b7
[ 16.974] (II) fglrx(0): End of Display0 EDID data --------------------
[ 16.974] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 16.975] (II) fglrx(0): EDID for output DFP1
[ 16.975] (II) fglrx(0): EDID for output DFP2
[ 16.976] (II) fglrx(0): EDID for output CRT1
[ 16.976] (II) fglrx(0): EDID for output CRT2
[ 16.976] (II) fglrx(0): Manufacturer: YUK Model: 4b2 Serial#: 3514
[ 16.976] (II) fglrx(0): Year: 2008 Week: 23
[ 16.976] (II) fglrx(0): EDID Version: 1.3
[ 16.976] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 16.976] (II) fglrx(0): Sync: Separate
[ 16.976] (II) fglrx(0): Max Image Size [cm]: horiz.: 37 vert.: 21
[ 16.976] (II) fglrx(0): Gamma: 2.20
[ 16.976] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 16.976] (II) fglrx(0): First detailed timing is preferred mode
[ 16.976] (II) fglrx(0): redX: 0.653 redY: 0.325 greenX: 0.300 greenY: 0.596
[ 16.976] (II) fglrx(0): blueX: 0.143 blueY: 0.079 whiteX: 0.313 whiteY: 0.329
[ 16.976] (II) fglrx(0): Supported established timings:
[ 16.976] (II) fglrx(0): 720x400@70Hz
[ 16.976] (II) fglrx(0): 640x480@60Hz
[ 16.976] (II) fglrx(0): 640x480@67Hz
[ 16.976] (II) fglrx(0): 640x480@72Hz
[ 16.976] (II) fglrx(0): 640x480@75Hz
[ 16.976] (II) fglrx(0): 800x600@56Hz
[ 16.976] (II) fglrx(0): 800x600@60Hz
[ 16.976] (II) fglrx(0): 800x600@72Hz
[ 16.976] (II) fglrx(0): 800x600@75Hz
[ 16.976] (II) fglrx(0): 832x624@75Hz
[ 16.976] (II) fglrx(0): Manufacturer's mask: 0
[ 16.976] (II) fglrx(0): Supported standard timings:
[ 16.976] (II) fglrx(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 16.976] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 75 vid: 53121
[ 16.976] (II) fglrx(0): Supported detailed timing:
[ 16.976] (II) fglrx(0): clock: 74.5 MHz Image Size: 372 x 210 mm
[ 16.976] (II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1472 h_blank_end 1664 h_border: 0
[ 16.976] (II) fglrx(0): v_active: 720 v_sync: 723 v_sync_end 728 v_blanking: 748 v_border: 0
[ 16.976] (II) fglrx(0): Serial No: 7823TG003514
[ 16.976] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 105 MHz
[ 16.976] (II) fglrx(0): Monitor name: YV17WB2
[ 16.976] (II) fglrx(0): EDID (in hex):
[ 16.976] (II) fglrx(0): 00ffffffffffff0066abb204ba0d0000
[ 16.976] (II) fglrx(0): 17120103682515782a5e95a7534c9824
[ 16.976] (II) fglrx(0): 145054bfe00081c081cf010101010101
[ 16.976] (II) fglrx(0): 0101010101011a1d008051d01c204080
[ 16.976] (II) fglrx(0): 350074d21000001c000000ff00373832
[ 16.976] (II) fglrx(0): 3354473030333531340a000000fd0032
[ 16.976] (II) fglrx(0): 4b1e530a000a202020202020000000fc
[ 16.977] (II) fglrx(0): 00595631375742320a202020202000b7
[ 16.977] (II) fglrx(0): Printing probed modes for output CRT2
[ 16.977] (II) fglrx(0): Modeline "1280x720"x60.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP)
[ 16.977] (II) fglrx(0): Modeline "1280x720"x75.0 95.65 1280 1352 1488 1696 720 721 724 752 -hsync +vsync (56.4 kHz e)
[ 16.977] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.977] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.977] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.977] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.977] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.977] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 16.977] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 16.977] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.977] (II) fglrx(0): Output DFP1 disconnected
[ 16.977] (II) fglrx(0): Output DFP2 disconnected
[ 16.977] (II) fglrx(0): Output CRT1 disconnected
[ 16.977] (II) fglrx(0): Output CRT2 connected
[ 16.977] (II) fglrx(0): Using exact sizes for initial modes
[ 16.977] (II) fglrx(0): Output CRT2 using initial mode 1280x720
[ 16.977] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 16.977] (II) fglrx(0): DPI set to (96, 96)
[ 16.977] (II) fglrx(0): Eyefinity capable adapter detected.
[ 16.977] (II) fglrx(0): Adapter AMD Radeon HD 6700 Series has 6 configurable heads and 1 displays connected.
[ 16.977] (==) fglrx(0): PseudoColor visuals disabled
[ 16.978] (II) Loading sub module "ramdac"
[ 16.978] (II) LoadModule: "ramdac"
[ 16.978] (II) Module "ramdac" already built-in
[ 16.978] (==) fglrx(0): NoDRI = NO
[ 16.978] (==) fglrx(0): Capabilities: 0x00000000
[ 16.978] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 16.978] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 16.978] (==) fglrx(0): UseFastTLS=0
[ 16.978] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 16.978] (--) Depth 24 pixmap format is 32 bpp
[ 16.978] (EE) fglrx(0): atiddxDriScreenInit failed. Probably kernel module missing or incompatible.
[ 16.978] (WW) fglrx(0): ***********************************************************
[ 16.978] (WW) fglrx(0): * DRI initialization failed *
[ 16.978] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 16.978] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 16.978] (WW) fglrx(0): ***********************************************************
[ 17.081] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 17.718] (II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
[ 17.718] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
[ 17.718] (II) fglrx(0): Largest offscreen area available: 1600 x 6591
[ 17.876] (==) fglrx(0): Backing store disabled
[ 17.877] Loading extension FGLRXEXTENSION
[ 17.877] (**) fglrx(0): DPMS enabled
[ 17.878] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 17.878] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 17.878] (II) LoadModule: "glesx"
[ 17.878] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 20.035] (II) Module glesx: vendor="X.Org Foundation"
[ 20.035] compiled for 1.4.99.906, module version = 1.0.0
[ 20.035] Loading extension GLESX
[ 20.035] (II) fglrx(0): GLESX enableFlags = 576
[ 20.036] (II) fglrx(0): Enable composite support successfully
[ 20.036] (WW) fglrx(0): Option "VendorName" is not used
[ 20.036] (WW) fglrx(0): Option "ModelName" is not used
[ 20.036] (==) fglrx(0): Silken mouse enabled
[ 20.037] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 20.037] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.208] (--) RandR disabled
[ 21.419] (II) AIGLX: Screen 0 is not DRI capable
[ 21.421] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[ 21.421] (II) fglrx(0): Setting screen physical size to 338 x 190
[ 23.404] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.404] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.404] (**) Power Button: Applying InputClass "keyboard"
[ 23.404] (II) LoadModule: "evdev"
[ 23.420] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.523] (II) Module evdev: vendor="X.Org Foundation"
[ 23.523] compiled for 1.14.2, module version = 2.8.1
[ 23.523] Module class: X.Org XInput Driver
[ 23.523] ABI class: X.Org XInput driver, version 19.1
[ 23.523] (II) Using input driver 'evdev' for 'Power Button'
[ 23.523] (**) Power Button: always reports core events
[ 23.523] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.523] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.523] (--) evdev: Power Button: Found keys
[ 23.523] (II) evdev: Power Button: Configuring as keyboard
[ 23.523] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 23.523] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.523] (**) Option "xkb_rules" "evdev"
[ 23.523] (**) Option "xkb_model" "pc104"
[ 23.523] (**) Option "xkb_layout" "de"
[ 23.523] (**) Option "xkb_variant" "nodeadkeys"
[ 23.581] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 23.581] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.581] (**) Power Button: Applying InputClass "keyboard"
[ 23.581] (II) Using input driver 'evdev' for 'Power Button'
[ 23.581] (**) Power Button: always reports core events
[ 23.581] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 23.582] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.582] (--) evdev: Power Button: Found keys
[ 23.582] (II) evdev: Power Button: Configuring as keyboard
[ 23.582] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 23.582] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 23.582] (**) Option "xkb_rules" "evdev"
[ 23.582] (**) Option "xkb_model" "pc104"
[ 23.582] (**) Option "xkb_layout" "de"
[ 23.582] (**) Option "xkb_variant" "nodeadkeys"
[ 23.583] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event10)
[ 23.583] (II) No input driver specified, ignoring this device.
[ 23.583] (II) This device may have been added with another device file.
[ 23.583] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event0)
[ 23.583] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.583] (**) Logitech Logitech USB Keyboard: Applying InputClass "keyboard"
[ 23.583] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 23.583] (**) Logitech Logitech USB Keyboard: always reports core events
[ 23.583] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event0"
[ 23.583] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc315
[ 23.583] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 23.583] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 23.583] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1:1.0/input/input0/event0"
[ 23.583] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 8)
[ 23.583] (**) Option "xkb_rules" "evdev"
[ 23.583] (**) Option "xkb_model" "pc104"
[ 23.583] (**) Option "xkb_layout" "de"
[ 23.583] (**) Option "xkb_variant" "nodeadkeys"
[ 23.584] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event1)
[ 23.584] (**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[ 23.584] (II) Using input driver 'evdev' for 'A4Tech PS/2+USB Mouse'
[ 23.584] (**) A4Tech PS/2+USB Mouse: always reports core events
[ 23.584] (**) evdev: A4Tech PS/2+USB Mouse: Device: "/dev/input/event1"
[ 23.584] (--) evdev: A4Tech PS/2+USB Mouse: Vendor 0x9da Product 0xe
[ 23.584] (--) evdev: A4Tech PS/2+USB Mouse: Found 12 mouse buttons
[ 23.584] (--) evdev: A4Tech PS/2+USB Mouse: Found scroll wheel(s)
[ 23.584] (--) evdev: A4Tech PS/2+USB Mouse: Found relative axes
[ 23.584] (--) evdev: A4Tech PS/2+USB Mouse: Found x and y relative axes
[ 23.584] (II) evdev: A4Tech PS/2+USB Mouse: Configuring as mouse
[ 23.584] (II) evdev: A4Tech PS/2+USB Mouse: Adding scrollwheel support
[ 23.584] (**) evdev: A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[ 23.584] (**) evdev: A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input1/event1"
[ 23.584] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE, id 9)
[ 23.584] (II) evdev: A4Tech PS/2+USB Mouse: initialized for relative axes.
[ 23.584] (**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[ 23.584] (**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
[ 23.584] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000
[ 23.584] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4
[ 23.584] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse0)
[ 23.584] (II) No input driver specified, ignoring this device.
[ 23.584] (II) This device may have been added with another device file.
[ 23.584] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event5)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.585] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event6)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.585] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.585] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.585] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event9)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.585] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 23.585] (II) No input driver specified, ignoring this device.
[ 23.585] (II) This device may have been added with another device file.
[ 23.586] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/event11)
[ 23.586] (II) No input driver specified, ignoring this device.
[ 23.586] (II) This device may have been added with another device file.
[ 23.586] (II) config/udev: Adding input device Xbox Gamepad (userspace driver) (/dev/input/js0)
[ 23.586] (II) No input driver specified, ignoring this device.
[ 23.586] (II) This device may have been added with another device file.
[ 23.588] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 27.416] (II) fglrx(0): EDID vendor "YUK", prod id 1202
[ 27.471] (II) fglrx(0): Using EDID range info for horizontal sync
[ 27.471] (II) fglrx(0): Using EDID range info for vertical refresh
[ 27.471] (II) fglrx(0): Printing DDC gathered Modelines:
[ 27.471] (II) fglrx(0): Modeline "1280x720"x0.0 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz eP)
[ 27.471] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 27.471] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 27.471] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 27.471] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 27.471] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 27.471] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 27.471] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 27.471] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 27.471] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 27.471] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 27.471] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 27.471] (II) fglrx(0): Modeline "1280x720"x75.0 95.65 1280 1352 1488 1696 720 721 724 752 -hsync +vsync (56.4 kHz e)