aloha community.
habe ein kleines problem mit meinem cpu-lüfter.
der cpu-lüfter wird erkannt:
[arne@archy ~]$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.01 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.02 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +11.91 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 1819 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
POWER FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +40.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +40.0°C (high = +45.0°C, crit = +75.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +30.0°C (high = +70.0°C)
(crit = +99.5°C, hyst = +97.5°C)
ein sensors-detect habe ich schon gemacht, lm_sensors.service ist enabled.
pwmconfig mault aber, dass er keinen regelbaren lüfter finden würde.
[arne@archy ~]$ sudo pwmconfig
[sudo] password for arne:
# pwmconfig revision 6166 (2013-05-01)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.
We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.
/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
Mainboard: ASUS M4A88T-M/USB3
Lüfter: Papst 4412F/2GML
ich würde dem schreihals gern etwas die drehzahl rausnehmen. im windoof funktionierte das mit speedfan auch gut. wo liegt also mein fehler?
grüße