Hi!
Ich habe seit dem letzten Update Probleme mit Arch + Gnome auf meinem Notebook (Packard Bell EasyNote TS11HR, integrierte Intel HD3000 + Nvidia GT630M).
Direkt nach dem Start von GDM bzw X stürzt der komplette Rechner ab. (kein Switch in das Terminal oder SSH-Connect möglich)
Verwende ich LXDM ohne Autologin gibt's keine Probleme. Das System läuft dann, soweit ich erkennen konnte, wie gewohnt mit Hardware-Beschleunigung.
Schalte ich in LXDM den Autologin an besteht das gleiche Problem wie mit GDM (dort sowohl mit als auch ohne Autologin).
Zur Analyse habe ich beim Start von GDM über SSH dmesg gecheckt und bin auf folgende Einträge gestoßen:
[ 296.955711] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 296.962380] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 302.515517] [drm:i915_hangcheck_hung] *ERROR* Hangcheck timer elapsed... GPU hung
[ 302.515544] [drm] capturing error event; look for more information in/sys/kernel/debug/dri/0/i915_error_state
[ 302.528820] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 302.535489] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 302.588900] [drm:init_ring_common] *ERROR* render ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 302.608136] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 302.624766] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 302.641398] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 302.646047] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 302.698974] [drm:init_ring_common] *ERROR* bsd ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 302.707926] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 302.724555] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 302.729771] ------------[ cut here ]------------
[ 302.729814] WARNING: at drivers/gpu/drm/i915/intel_pm.c:4399 __gen6_gt_wait_for_fifo+0x7e/0x90 [i915]()
[ 302.729817] Hardware name: EasyNote TS11HR
[ 302.729820] Modules linked in: fuse joydev arc4 acer_wmi iTCO_wdt sparse_keymap iTCO_vendor_support ath9k ath9k_common ath9k_hw intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi ath snd_hda_codec_realtek kvm uvcvideo mac80211 crc32_pclmul crc32c_intel videobuf2_vmalloc ghash_clmulni_intel cryptd microcode snd_hda_intel videobuf2_memops videobuf2_core snd_hda_codec psmouse videodev cfg80211 serio_raw media tg3 snd_hwdep snd_pcm ptp pps_core rfkill libphy snd_page_alloc snd_timer snd pcspkr i2c_i801 lpc_ich soundcore mei mperf battery ac wmi evdev processor ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom ahci libahci libata ehci_pci sdhci_pci ehci_hcd sdhci scsi_mod mmc_core usbcore usb_common i915 video button i2c_algo_bit intel_agp intel_gtt drm_kms_helper drm i2c_core
[ 302.729935] Pid: 88, comm: kworker/u:5 Not tainted 3.9.2-1-ARCH #1
[ 302.729938] Call Trace:
[ 302.729951] [<ffffffff81058090>] warn_slowpath_common+0x70/0xa0
[ 302.729958] [<ffffffff8105817a>] warn_slowpath_null+0x1a/0x20
[ 302.729980] [<ffffffffa00df14e>] __gen6_gt_wait_for_fifo+0x7e/0x90 [i915]
[ 302.729999] [<ffffffffa0093465>] i915_write32+0x1d5/0x200 [i915]
[ 302.730020] [<ffffffffa00e321d>] init_ring_common+0xbd/0x390 [i915]
[ 302.730041] [<ffffffffa00e3692>] ? init_render_ring+0x1a2/0x370 [i915]
[ 302.730059] [<ffffffffa0093af0>] i915_reset+0xe0/0x190 [i915]
[ 302.730078] [<ffffffffa00993b3>] i915_error_work_func+0xc3/0x140 [i915]
[ 302.730095] [<ffffffff81075e30>] process_one_work+0x170/0x440
[ 302.730103] [<ffffffff81076905>] worker_thread+0x115/0x3d0
[ 302.730110] [<ffffffff810767f0>] ? manage_workers+0x340/0x340
[ 302.730117] [<ffffffff8107b5d0>] kthread+0xc0/0xd0
[ 302.730124] [<ffffffff8107b510>] ? kthread_create_on_node+0x120/0x120
[ 302.730132] [<ffffffff814d96ac>] ret_from_fork+0x7c/0xb0
[ 302.730138] [<ffffffff8107b510>] ? kthread_create_on_node+0x120/0x120
[ 302.730143] ---[ end trace 844da7e8fd102ab9 ]---
[ 302.782354] [drm:init_ring_common] *ERROR* blitter ring initialization failed ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 303.235880] [drm:__gen6_gt_force_wake_get] *ERROR* Timed out waiting for forcewake to ack request.
[ 303.469332] [drm:__gen6_gt_wait_for_thread_c0] *ERROR* GT thread status wait timed out
[ 303.476192] ------------[ cut here ]------------
[ 303.476237] WARNING: at drivers/gpu/drm/i915/intel_pm.c:4399 __gen6_gt_wait_for_fifo+0x7e/0x90 [i915]()
[ 303.476241] Hardware name: EasyNote TS11HR
[ 303.476244] Modules linked in: fuse joydev arc4 acer_wmi iTCO_wdt sparse_keymap iTCO_vendor_support ath9k ath9k_common ath9k_hw intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi ath snd_hda_codec_realtek kvm uvcvideo mac80211 crc32_pclmul crc32c_intel videobuf2_vmalloc ghash_clmulni_intel cryptd microcode snd_hda_intel videobuf2_memops videobuf2_core snd_hda_codec psmouse videodev cfg80211 serio_raw media tg3 snd_hwdep snd_pcm ptp pps_core rfkill libphy snd_page_alloc snd_timer snd pcspkr i2c_i801 lpc_ich soundcore mei mperf battery ac wmi evdev processor ext4 crc16 mbcache jbd2 sr_mod sd_mod cdrom ahci libahci libata ehci_pci sdhci_pci ehci_hcd sdhci scsi_mod mmc_core usbcore usb_common i915 video button i2c_algo_bit intel_agp intel_gtt drm_kms_helper drm i2c_core
[ 303.476358] Pid: 88, comm: kworker/u:5 Tainted: G W 3.9.2-1-ARCH #1
[ 303.476361] Call Trace:
[ 303.476375] [<ffffffff81058090>] warn_slowpath_common+0x70/0xa0
[ 303.476382] [<ffffffff8105817a>] warn_slowpath_null+0x1a/0x20
[ 303.476404] [<ffffffffa00df14e>] __gen6_gt_wait_for_fifo+0x7e/0x90 [i915]
[ 303.476423] [<ffffffffa0093465>] i915_write32+0x1d5/0x200 [i915]
[ 303.476446] [<ffffffffa00ae5bf>] i915_gem_init_ppgtt+0x16f/0x1d0 [i915]
[ 303.476464] [<ffffffffa0093b10>] i915_reset+0x100/0x190 [i915]
[ 303.476483] [<ffffffffa00993b3>] i915_error_work_func+0xc3/0x140 [i915]
[ 303.476499] [<ffffffff81075e30>] process_one_work+0x170/0x440
[ 303.476507] [<ffffffff81076905>] worker_thread+0x115/0x3d0
[ 303.476515] [<ffffffff810767f0>] ? manage_workers+0x340/0x340
[ 303.476522] [<ffffffff8107b5d0>] kthread+0xc0/0xd0
[ 303.476529] [<ffffffff8107b510>] ? kthread_create_on_node+0x120/0x120
[ 303.476537] [<ffffffff814d96ac>] ret_from_fork+0x7c/0xb0
[ 303.476543] [<ffffffff8107b510>] ? kthread_create_on_node+0x120/0x120
[ 303.476547] ---[ end trace 844da7e8fd102aba ]---
danach war der Bildschirm schwarz und die SSH-Verbindung tot. In diesem Fall hilft nur noch Hardreset.
Der Xorg-Log sieht meiner Meinung nach nicht ungewöhnlich aus:
[ 289.990]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 289.990] X Protocol Version 11, Revision 0
[ 289.990] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 289.990] Current Operating System: Linux notebook 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013 x86_64
[ 289.990] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a1edc6cb-d200-476c-a9d8-2a9423a8b4a9 ro quiet
[ 289.990] Build Date: 17 April 2013 02:37:06PM
[ 289.990]
[ 289.990] Current version of pixman: 0.30.0
[ 289.990] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 289.990] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 289.991] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 18 20:09:05 2013
[ 289.992] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 289.994] (==) No Layout section. Using the first Screen section.
[ 289.994] (==) No screen section available. Using defaults.
[ 289.994] (**) |-->Screen "Default Screen Section" (0)
[ 289.994] (**) | |-->Monitor "<default monitor>"
[ 289.994] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 289.994] (==) Automatically adding devices
[ 289.994] (==) Automatically enabling devices
[ 289.994] (==) Automatically adding GPU devices
[ 289.996] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 289.996] Entry deleted from font path.
[ 289.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 289.998] Entry deleted from font path.
[ 289.998] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 289.998] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 289.998] Entry deleted from font path.
[ 289.998] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 289.998] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 289.998] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 289.999] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 289.999] (II) Loader magic: 0x7fcc20
[ 289.999] (II) Module ABI versions:
[ 289.999] X.Org ANSI C Emulation: 0.4
[ 289.999] X.Org Video Driver: 14.1
[ 289.999] X.Org XInput driver : 19.1
[ 289.999] X.Org Server Extension : 7.0
[ 289.999] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 290.002] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00002000/64
[ 290.003] Initializing built-in extension Generic Event Extension
[ 290.003] Initializing built-in extension SHAPE
[ 290.003] Initializing built-in extension MIT-SHM
[ 290.003] Initializing built-in extension XInputExtension
[ 290.003] Initializing built-in extension XTEST
[ 290.003] Initializing built-in extension BIG-REQUESTS
[ 290.003] Initializing built-in extension SYNC
[ 290.003] Initializing built-in extension XKEYBOARD
[ 290.003] Initializing built-in extension XC-MISC
[ 290.003] Initializing built-in extension SECURITY
[ 290.003] Initializing built-in extension XINERAMA
[ 290.003] Initializing built-in extension XFIXES
[ 290.003] Initializing built-in extension RENDER
[ 290.003] Initializing built-in extension RANDR
[ 290.003] Initializing built-in extension COMPOSITE
[ 290.003] Initializing built-in extension DAMAGE
[ 290.003] Initializing built-in extension MIT-SCREEN-SAVER
[ 290.003] Initializing built-in extension DOUBLE-BUFFER
[ 290.003] Initializing built-in extension RECORD
[ 290.003] Initializing built-in extension DPMS
[ 290.003] Initializing built-in extension X-Resource
[ 290.003] Initializing built-in extension XVideo
[ 290.003] Initializing built-in extension XVideo-MotionCompensation
[ 290.003] Initializing built-in extension XFree86-VidModeExtension
[ 290.003] Initializing built-in extension XFree86-DGA
[ 290.003] Initializing built-in extension XFree86-DRI
[ 290.003] Initializing built-in extension DRI2
[ 290.003] (II) LoadModule: "glx"
[ 290.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 290.007] (II) Module glx: vendor="X.Org Foundation"
[ 290.007] compiled for 1.14.1, module version = 1.0.0
[ 290.007] ABI class: X.Org Server Extension, version 7.0
[ 290.007] (==) AIGLX enabled
[ 290.007] Loading extension GLX
[ 290.007] (==) Matched intel as autoconfigured driver 0
[ 290.007] (==) Matched intel as autoconfigured driver 1
[ 290.007] (==) Matched vesa as autoconfigured driver 2
[ 290.007] (==) Matched modesetting as autoconfigured driver 3
[ 290.007] (==) Matched fbdev as autoconfigured driver 4
[ 290.007] (==) Assigned the driver to the xf86ConfigLayout
[ 290.008] (II) LoadModule: "intel"
[ 290.008] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 290.010] (II) Module intel: vendor="X.Org Foundation"
[ 290.010] compiled for 1.14.0, module version = 2.21.6
[ 290.011] Module class: X.Org Video Driver
[ 290.011] ABI class: X.Org Video Driver, version 14.1
[ 290.011] (II) LoadModule: "vesa"
[ 290.011] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 290.011] (II) Module vesa: vendor="X.Org Foundation"
[ 290.011] compiled for 1.14.0, module version = 2.3.2
[ 290.011] Module class: X.Org Video Driver
[ 290.011] ABI class: X.Org Video Driver, version 14.1
[ 290.011] (II) LoadModule: "modesetting"
[ 290.012] (WW) Warning, couldn't open module modesetting
[ 290.012] (II) UnloadModule: "modesetting"
[ 290.012] (II) Unloading modesetting
[ 290.012] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 290.012] (II) LoadModule: "fbdev"
[ 290.013] (WW) Warning, couldn't open module fbdev
[ 290.013] (II) UnloadModule: "fbdev"
[ 290.013] (II) Unloading fbdev
[ 290.013] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 290.013] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 290.014] (II) VESA: driver for VESA chipsets: vesa
[ 290.014] (++) using VT number 7
[ 290.024] (WW) Falling back to old probe method for vesa
[ 290.025] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 290.025] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 290.025] (==) intel(0): RGB weight 888
[ 290.025] (==) intel(0): Default visual is TrueColor
[ 290.025] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 290.025] (**) intel(0): Relaxed fencing enabled
[ 290.025] (**) intel(0): Wait on SwapBuffers? enabled
[ 290.025] (**) intel(0): Triple buffering? enabled
[ 290.025] (**) intel(0): Framebuffer tiled
[ 290.025] (**) intel(0): Pixmaps tiled
[ 290.025] (**) intel(0): 3D buffers tiled
[ 290.025] (**) intel(0): SwapBuffers wait enabled
[ 290.026] (==) intel(0): video overlay key set to 0x101fe
[ 290.026] (II) intel(0): Output LVDS1 has no monitor section
[ 290.126] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 290.128] (II) intel(0): Output VGA1 has no monitor section
[ 290.128] (II) intel(0): Output HDMI1 has no monitor section
[ 290.128] (II) intel(0): Output DP1 has no monitor section
[ 290.129] (II) intel(0): EDID for output LVDS1
[ 290.129] (II) intel(0): Manufacturer: AUO Model: 26ec Serial#: 0
[ 290.129] (II) intel(0): Year: 2009 Week: 1
[ 290.129] (II) intel(0): EDID Version: 1.3
[ 290.129] (II) intel(0): Digital Display Input
[ 290.129] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 290.129] (II) intel(0): Gamma: 2.20
[ 290.129] (II) intel(0): No DPMS capabilities specified
[ 290.129] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 290.129] (II) intel(0): First detailed timing is preferred mode
[ 290.129] (II) intel(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
[ 290.129] (II) intel(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 290.129] (II) intel(0): Manufacturer's mask: 0
[ 290.129] (II) intel(0): Supported detailed timing:
[ 290.129] (II) intel(0): clock: 71.8 MHz Image Size: 344 x 193 mm
[ 290.129] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 290.129] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0
[ 290.129] (II) intel(0): Unknown vendor-specific block f
[ 290.129] (II) intel(0): AUO
[ 290.129] (II) intel(0): B156XW02 V6
[ 290.129] (II) intel(0): EDID (in hex):
[ 290.129] (II) intel(0): 00ffffffffffff0006afec2600000000
[ 290.129] (II) intel(0): 01130103802213780ad7759355558d29
[ 290.129] (II) intel(0): 24505400000001010101010101010101
[ 290.129] (II) intel(0): 0101010101010c1c56a0500010303020
[ 290.129] (II) intel(0): 360058c1100000180000000f00000000
[ 290.129] (II) intel(0): 00000000000000000020000000fe0041
[ 290.129] (II) intel(0): 554f0a202020202020202020000000fe
[ 290.129] (II) intel(0): 004231353658573032205636200a0065
[ 290.130] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 290.130] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 290.130] (II) intel(0): Printing probed modes for output LVDS1
[ 290.130] (II) intel(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 290.130] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 290.130] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 290.130] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 290.130] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 290.131] (II) intel(0): EDID for output VGA1
[ 290.132] (II) intel(0): EDID for output HDMI1
[ 290.132] (II) intel(0): EDID for output DP1
[ 290.132] (II) intel(0): Output LVDS1 connected
[ 290.132] (II) intel(0): Output VGA1 disconnected
[ 290.132] (II) intel(0): Output HDMI1 disconnected
[ 290.132] (II) intel(0): Output DP1 disconnected
[ 290.132] (II) intel(0): Using exact sizes for initial modes
[ 290.132] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 290.132] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 290.132] (II) intel(0): Kernel page flipping support detected, enabling
[ 290.132] (==) intel(0): DPI set to (96, 96)
[ 290.132] (II) Loading sub module "fb"
[ 290.132] (II) LoadModule: "fb"
[ 290.132] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 290.133] (II) Module fb: vendor="X.Org Foundation"
[ 290.134] compiled for 1.14.1, module version = 1.0.0
[ 290.134] ABI class: X.Org ANSI C Emulation, version 0.4
[ 290.134] (II) Loading sub module "dri2"
[ 290.134] (II) LoadModule: "dri2"
[ 290.134] (II) Module "dri2" already built-in
[ 290.134] (II) UnloadModule: "vesa"
[ 290.134] (II) Unloading vesa
[ 290.134] (==) Depth 24 pixmap format is 32 bpp
[ 290.134] (II) intel(0): [DRI2] Setup complete
[ 290.134] (II) intel(0): [DRI2] DRI driver: i965
[ 290.134] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 290.137] (II) UXA(0): Driver registered support for the following operations:
[ 290.137] (II) solid
[ 290.137] (II) copy
[ 290.137] (II) composite (RENDER acceleration)
[ 290.137] (II) put_image
[ 290.137] (II) get_image
[ 290.137] (==) intel(0): Backing store disabled
[ 290.137] (==) intel(0): Silken mouse enabled
[ 290.138] (II) intel(0): Initializing HW Cursor
[ 290.138] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 290.139] (==) intel(0): DPMS enabled
[ 290.139] (==) intel(0): Intel XvMC decoder enabled
[ 290.139] (II) intel(0): Set up textured video
[ 290.139] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 290.140] (II) intel(0): direct rendering: DRI2 Enabled
[ 290.140] (==) intel(0): hotplug detection: "enabled"
[ 290.163] (--) RandR disabled
[ 290.199] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 290.199] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 290.199] (II) AIGLX: enabled GLX_ARB_create_context
[ 290.199] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 290.199] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 290.199] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 290.199] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 290.199] (II) AIGLX: Loaded and initialized i965
[ 290.199] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 290.200] (II) intel(0): Setting screen physical size to 361 x 203
[ 290.297] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 290.297] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 290.297] (II) LoadModule: "evdev"
[ 290.298] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 290.300] (II) Module evdev: vendor="X.Org Foundation"
[ 290.300] compiled for 1.14.0, module version = 2.8.0
[ 290.300] Module class: X.Org XInput Driver
[ 290.300] ABI class: X.Org XInput driver, version 19.1
[ 290.300] (II) Using input driver 'evdev' for 'Power Button'
[ 290.300] (**) Power Button: always reports core events
[ 290.300] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 290.300] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 290.300] (--) evdev: Power Button: Found keys
[ 290.300] (II) evdev: Power Button: Configuring as keyboard
[ 290.300] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 290.300] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 290.300] (**) Option "xkb_rules" "evdev"
[ 290.300] (**) Option "xkb_model" "evdev"
[ 290.300] (**) Option "xkb_layout" "us"
[ 290.358] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 290.358] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 290.358] (II) Using input driver 'evdev' for 'Video Bus'
[ 290.358] (**) Video Bus: always reports core events
[ 290.358] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 290.358] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 290.358] (--) evdev: Video Bus: Found keys
[ 290.358] (II) evdev: Video Bus: Configuring as keyboard
[ 290.358] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 290.358] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 290.358] (**) Option "xkb_rules" "evdev"
[ 290.358] (**) Option "xkb_model" "evdev"
[ 290.358] (**) Option "xkb_layout" "us"
[ 290.360] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 290.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 290.360] (II) Using input driver 'evdev' for 'Power Button'
[ 290.360] (**) Power Button: always reports core events
[ 290.360] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 290.360] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 290.360] (--) evdev: Power Button: Found keys
[ 290.360] (II) evdev: Power Button: Configuring as keyboard
[ 290.360] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 290.360] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 290.360] (**) Option "xkb_rules" "evdev"
[ 290.360] (**) Option "xkb_model" "evdev"
[ 290.360] (**) Option "xkb_layout" "us"
[ 290.361] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 290.361] (II) No input driver specified, ignoring this device.
[ 290.361] (II) This device may have been added with another device file.
[ 290.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 290.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 290.362] (II) Using input driver 'evdev' for 'Sleep Button'
[ 290.362] (**) Sleep Button: always reports core events
[ 290.362] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 290.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 290.362] (--) evdev: Sleep Button: Found keys
[ 290.362] (II) evdev: Sleep Button: Configuring as keyboard
[ 290.362] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input2/event2"
[ 290.362] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 290.362] (**) Option "xkb_rules" "evdev"
[ 290.362] (**) Option "xkb_model" "evdev"
[ 290.362] (**) Option "xkb_layout" "us"
[ 290.363] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 290.364] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event8)
[ 290.364] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 290.364] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 290.364] (**) 1.3M HD WebCam: always reports core events
[ 290.364] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event8"
[ 290.364] (--) evdev: 1.3M HD WebCam: Vendor 0x4fc Product 0x2801
[ 290.364] (--) evdev: 1.3M HD WebCam: Found keys
[ 290.364] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 290.364] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event8"
[ 290.364] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 10)
[ 290.364] (**) Option "xkb_rules" "evdev"
[ 290.364] (**) Option "xkb_model" "evdev"
[ 290.364] (**) Option "xkb_layout" "us"
[ 290.365] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 290.365] (II) No input driver specified, ignoring this device.
[ 290.365] (II) This device may have been added with another device file.
[ 290.365] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 290.365] (II) No input driver specified, ignoring this device.
[ 290.365] (II) This device may have been added with another device file.
[ 290.366] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 290.366] (II) No input driver specified, ignoring this device.
[ 290.366] (II) This device may have been added with another device file.
[ 290.367] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[ 290.367] (II) No input driver specified, ignoring this device.
[ 290.367] (II) This device may have been added with another device file.
[ 290.367] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 290.367] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 290.367] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 290.367] (**) AT Translated Set 2 keyboard: always reports core events
[ 290.367] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 290.367] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 290.367] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 290.367] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 290.368] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 290.368] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 290.368] (**) Option "xkb_rules" "evdev"
[ 290.368] (**) Option "xkb_model" "evdev"
[ 290.368] (**) Option "xkb_layout" "us"
[ 290.369] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[ 290.369] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 290.369] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 290.369] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 290.369] (II) LoadModule: "synaptics"
[ 290.369] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 290.370] (II) Module synaptics: vendor="X.Org Foundation"
[ 290.370] compiled for 1.14.0, module version = 1.7.0
[ 290.370] Module class: X.Org XInput Driver
[ 290.370] ABI class: X.Org XInput driver, version 19.1
[ 290.370] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 290.370] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 290.370] (**) Option "Device" "/dev/input/event14"
[ 290.393] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 290.393] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 290.394] (**) Option "TapButton1" "1"
[ 290.394] (**) Option "TapButton2" "2"
[ 290.394] (**) Option "TapButton3" "3"
[ 290.394] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 290.394] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 290.410] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 290.410] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 290.410] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 290.410] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 290.410] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 290.411] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 290.411] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 290.411] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 290.411] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 290.411] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 290.412] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 290.412] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 290.413] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 290.413] (II) No input driver specified, ignoring this device.
[ 290.413] (II) This device may have been added with another device file.
[ 290.414] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event12)
[ 290.414] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 290.414] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 290.414] (**) Acer WMI hotkeys: always reports core events
[ 290.414] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event12"
[ 290.414] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 290.414] (--) evdev: Acer WMI hotkeys: Found keys
[ 290.414] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 290.414] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[ 290.414] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[ 290.414] (**) Option "xkb_rules" "evdev"
[ 290.414] (**) Option "xkb_model" "evdev"
[ 290.414] (**) Option "xkb_layout" "us"
[ 290.415] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event13)
[ 290.416] (II) No input driver specified, ignoring this device.
[ 290.416] (II) This device may have been added with another device file.
[ 290.416] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 290.416] (II) No input driver specified, ignoring this device.
[ 290.416] (II) This device may have been added with another device file.
[ 291.029] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 291.029] (II) intel(0): Printing DDC gathered Modelines:
[ 291.029] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
Um Probleme mit alten Paketen etc. auszuschließen habe ich das System bereits neu aufgesetzt. Das Problem besteht somit bei der Minimalkonfiguration Archlinux-Base, Gnome, xf86-video-intel.
Die dedizierte Nvidia-Karte habe ich im Bios ausgeschaltet.
Leider weiß ich nicht mehr ob bei dem Update nachdem die Probleme anfingen der Treiber geupdatet wurde. Deswegen kann ich einen Hardware-Fehler nicht ausschließen.
Hat jemand ähnliche Erfahrungen mit dem Intel-Treiber gemacht?
Viele Grüße
Daniel