Arch Linux

Dual-Screen, xrandr: 1. Screen immer 1024x768

Ovion

Hi,
ich habe hier neuerdings ein DualScreen-Setup, wobei ich einen 1366x768 px-Laptop-Bildschirm als Hauptschirm nutze sowie einen 1920x1080 px-Externen als Zweitbildschirm.
Ist der Laptop an und ich stecke den zweiten Bildschirm an, kann ich über xrandr alles so einstellen, wie es sein soll.

Ist allerdings beim Hochfahren des Laptops der zweite Bildschirm eingesteckt (nur eingesteckt, nichtmal angeschaltet), dann setzt mir X den Laptop-Bildschirm auf 1024x768 px (mit zwei schönen dicken schwarzen Streifen lings und rechts) und ich muss den externen Monitor rausziehen und X neustarten, um die reguläre Auflösung von 1366x768 px wiederherzustellen. Die 1366er-Auflösung ist bei xrandr als beste Auflösung markiert.
Ich muss auch X neustarten, ich kann mittels xrandr nicht die native Auflösung des Laptopdisplays im laufenden Betrieb wiederherstellen.

Wo liegt das Problem, was muss ich da umstellen, wieso macht X das?

Ich danke für Hilfe!

Edit: Grafik ist eine Intel HD4000, Treiber im Paket xf86-video-intel (nehme ich an, denn), ausgewählt von X, ich habe den Treiber nicht manuell angegeben.

Die Ausgabe von xrandr mit beiden Bildschirmen angesteckt, aber Laptopbildschirm in richtiger Auflösung:

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm
   1366x768       60.0*+
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected (normal left inverted right x axis y axis)
   1920x1080      60.0 +
   1600x1200      60.0  
   1680x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1280x800       59.8  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        60.0  
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)

Creshal

VGA? Brrr. Ab ins Eck, schämen. 😃

Schau mal im Xorg-Log nach, ob und wann der Treiber die EDID-Daten des externen Monitors kriegt.

Edit: Was passiert, wenn du versucht, die native Auflösung wiederherzustellen? Auffälligkeiten im X-Log? Fehlermeldungen von xrandr?

Ovion

Genügt das hier, um den Zeitpunkt hinreichend zu bestimmen?

$ grep EDID Xorg.0.log.old
[   276.487] (II) intel(0): EDID for output LVDS1
[   276.487] (II) intel(0): EDID Version: 1.3
[   276.487] (II) intel(0): EDID (in hex):
[   276.613] (II) intel(0): EDID for output VGA1
[   276.613] (II) intel(0): EDID Version: 1.3
[   276.614] (II) intel(0): EDID (in hex):
[   276.640] (II) intel(0): EDID for output HDMI1
[   276.680] (II) intel(0): EDID for output DP1
[   276.693] (II) intel(0): EDID for output HDMI2
[   276.706] (II) intel(0): EDID for output HDMI3
[   276.746] (II) intel(0): EDID for output DP2
[   276.786] (II) intel(0): EDID for output DP3
[   278.014] (II) intel(0): EDID vendor "LGD", prod id 728

ein "grep xrandr Xorg.*" erbrachte nichts, ich mach's gleich nochmal und schaue dann.
Fehlermeldungen von xrandr? Wäre schön, dann hätte ich einen Anhaltspunkt. xrandr nimmt den Befehl beschwerdefrei entgegen und beklagt sich auch nach dessen "Ausführung" nicht, keinerlei Ausgaben. Es ist nur nichts passiert, egal ob ich "--auto" oder die entsprechende Auflösung mittels "--output LVDS1 -s 1366x768" einzustellen versuche.

OT: Ecke oder Mini-Displayport-auf-DVI-Adapter besorgen... Och nö, keine Lust, ich nehme die Ecke.^^
Ernst beisete: Sieht man überhaupt einen Unterschied, ob ich digital oder analog anschließe?

Edit:
Wenn ich versuche, via

xrandr --output LVDS1 -s 1024x768

auf diese Auflösung umzustellen (der zweite von xrandr ausgewiesene Betriebsmodus für dies Display), dann passiert wieder gar nüscht, xrandr gibt keinerlei ausgaben und im Xlog, zumindest dem von startx ausgegebenen, findet sich überhaupt nichts diesbezüglich.
Soll ich nochmal versuchen, von 1024x768 auf 1366x768 hochzuschalten? Eigentlich ist's ja dasselbe wie runterschalten, oder?

Creshal

> Genügt das hier, um den Zeitpunkt hinreichend zu bestimmen?

Jein. Okay, zeitlich passt es, also muss es an was anderem liegen. 🙂 Bitte das komplette Log posten.

> xrandr nimmt den Befehl beschwerdefrei entgegen und beklagt sich auch nach dessen "Ausführung" nicht

Also keine Fehlermeldung. Meh. Ändert sich das X-Log generell nach dem xrandr-Aufruf?

> Sieht man überhaupt einen Unterschied, ob ich digital oder analog anschließe?

Weniger (sprich: kein) Geflimmer, schärfere Schriftkontraste, höhere Farbqualität, höhere Maximalauflösung, …

Ovion

Creshal schriebBitte das komplette Log posten.

Einmal Log, wenn ich das richtig überflogen habe, ist das die Session, in der ich X aufgemacht habe, festgestellt habe, dass das Problem schon wieder auftritt und X wieder beendet habe, um den VGA-Stecker zu ziehen.
Windowmanager Awesome sollte das einzige sein, dass X-relevant gestartet wurde. Gerät ist das X230, falls die Info irgendwie relevant ist.

[   276.178] 
X.Org X Server 1.14.0
Release Date: 2013-03-05
[   276.178] X Protocol Version 11, Revision 0
[   276.178] Build Operating System: Linux 3.8.2-1-ARCH x86_64 
[   276.178] Current Operating System: Linux Megatron 3.8.5-1-ARCH #1 SMP PREEMPT Fri Mar 29 19:18:14 CET 2013 x86_64
[   276.178] Kernel command line: cryptdevice=/dev/sdb2:vgrs:allow-discards root=/dev/mapper/vgrs-lvroot resume=/dev/mapper/vgrs-lvswap ro quiet init=/bin/systemd initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[   276.178] Build Date: 09 March 2013  11:43:05AM
[   276.178]  
[   276.178] Current version of pixman: 0.28.2
[   276.178] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   276.178] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   276.178] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr  9 13:33:16 2013
[   276.178] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   276.179] (==) No Layout section.  Using the first Screen section.
[   276.179] (==) No screen section available. Using defaults.
[   276.179] (**) |-->Screen "Default Screen Section" (0)
[   276.179] (**) |   |-->Monitor "<default monitor>"
[   276.179] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   276.179] (==) Automatically adding devices
[   276.179] (==) Automatically enabling devices
[   276.179] (==) Automatically adding GPU devices
[   276.179] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   276.179] 	Entry deleted from font path.
[   276.179] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   276.179] 	Entry deleted from font path.
[   276.179] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   276.179] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   276.179] 	Entry deleted from font path.
[   276.179] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   276.179] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   276.179] (==) ModulePath set to "/usr/lib/xorg/modules"
[   276.179] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   276.179] (II) Loader magic: 0x7fdc20
[   276.179] (II) Module ABI versions:
[   276.179] 	X.Org ANSI C Emulation: 0.4
[   276.179] 	X.Org Video Driver: 14.1
[   276.179] 	X.Org XInput driver : 19.1
[   276.179] 	X.Org Server Extension : 7.0
[   276.179] (II) config/udev: Adding drm device (/dev/dri/card0)
[   276.182] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21fa rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[   276.182] Initializing built-in extension Generic Event Extension
[   276.182] Initializing built-in extension SHAPE
[   276.182] Initializing built-in extension MIT-SHM
[   276.182] Initializing built-in extension XInputExtension
[   276.182] Initializing built-in extension XTEST
[   276.182] Initializing built-in extension BIG-REQUESTS
[   276.182] Initializing built-in extension SYNC
[   276.182] Initializing built-in extension XKEYBOARD
[   276.182] Initializing built-in extension XC-MISC
[   276.182] Initializing built-in extension SECURITY
[   276.182] Initializing built-in extension XINERAMA
[   276.182] Initializing built-in extension XFIXES
[   276.182] Initializing built-in extension RENDER
[   276.182] Initializing built-in extension RANDR
[   276.182] Initializing built-in extension COMPOSITE
[   276.183] Initializing built-in extension DAMAGE
[   276.183] Initializing built-in extension MIT-SCREEN-SAVER
[   276.183] Initializing built-in extension DOUBLE-BUFFER
[   276.183] Initializing built-in extension RECORD
[   276.183] Initializing built-in extension DPMS
[   276.183] Initializing built-in extension X-Resource
[   276.183] Initializing built-in extension XVideo
[   276.183] Initializing built-in extension XVideo-MotionCompensation
[   276.183] Initializing built-in extension XFree86-VidModeExtension
[   276.183] Initializing built-in extension XFree86-DGA
[   276.183] Initializing built-in extension XFree86-DRI
[   276.183] Initializing built-in extension DRI2
[   276.183] (II) LoadModule: "glx"
[   276.183] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   276.183] (II) Module glx: vendor="X.Org Foundation"
[   276.183] 	compiled for 1.14.0, module version = 1.0.0
[   276.183] 	ABI class: X.Org Server Extension, version 7.0
[   276.183] (==) AIGLX enabled
[   276.183] Loading extension GLX
[   276.183] (==) Matched intel as autoconfigured driver 0
[   276.183] (==) Matched intel as autoconfigured driver 1
[   276.183] (==) Matched vesa as autoconfigured driver 2
[   276.183] (==) Matched modesetting as autoconfigured driver 3
[   276.183] (==) Matched fbdev as autoconfigured driver 4
[   276.183] (==) Assigned the driver to the xf86ConfigLayout
[   276.183] (II) LoadModule: "intel"
[   276.183] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   276.184] (II) Module intel: vendor="X.Org Foundation"
[   276.184] 	compiled for 1.14.0, module version = 2.21.5
[   276.184] 	Module class: X.Org Video Driver
[   276.184] 	ABI class: X.Org Video Driver, version 14.1
[   276.184] (II) LoadModule: "vesa"
[   276.184] (WW) Warning, couldn't open module vesa
[   276.184] (II) UnloadModule: "vesa"
[   276.184] (II) Unloading vesa
[   276.184] (EE) Failed to load module "vesa" (module does not exist, 0)
[   276.184] (II) LoadModule: "modesetting"
[   276.184] (WW) Warning, couldn't open module modesetting
[   276.184] (II) UnloadModule: "modesetting"
[   276.184] (II) Unloading modesetting
[   276.184] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   276.184] (II) LoadModule: "fbdev"
[   276.185] (WW) Warning, couldn't open module fbdev
[   276.185] (II) UnloadModule: "fbdev"
[   276.185] (II) Unloading fbdev
[   276.185] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   276.185] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   276.186] (++) using VT number 1

[   276.186] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   276.186] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   276.186] (==) intel(0): RGB weight 888
[   276.186] (==) intel(0): Default visual is TrueColor
[   276.186] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   276.186] (**) intel(0): Relaxed fencing enabled
[   276.186] (**) intel(0): Wait on SwapBuffers? enabled
[   276.186] (**) intel(0): Triple buffering? enabled
[   276.186] (**) intel(0): Framebuffer tiled
[   276.186] (**) intel(0): Pixmaps tiled
[   276.186] (**) intel(0): 3D buffers tiled
[   276.186] (**) intel(0): SwapBuffers wait enabled
[   276.186] (==) intel(0): video overlay key set to 0x101fe
[   276.186] (II) intel(0): Output LVDS1 has no monitor section
[   276.187] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   276.313] (II) intel(0): Output VGA1 has no monitor section
[   276.340] (II) intel(0): Output HDMI1 has no monitor section
[   276.380] (II) intel(0): Output DP1 has no monitor section
[   276.393] (II) intel(0): Output HDMI2 has no monitor section
[   276.406] (II) intel(0): Output HDMI3 has no monitor section
[   276.446] (II) intel(0): Output DP2 has no monitor section
[   276.486] (II) intel(0): Output DP3 has no monitor section
[   276.487] (II) intel(0): EDID for output LVDS1
[   276.487] (II) intel(0): Manufacturer: LGD  Model: 2d8  Serial#: 0
[   276.487] (II) intel(0): Year: 2012  Week: 0
[   276.487] (II) intel(0): EDID Version: 1.3
[   276.487] (II) intel(0): Digital Display Input
[   276.487] (II) intel(0): Max Image Size [cm]: horiz.: 28  vert.: 16
[   276.487] (II) intel(0): Gamma: 2.20
[   276.487] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[   276.487] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   276.487] (II) intel(0): First detailed timing is preferred mode
[   276.487] (II) intel(0): redX: 0.600 redY: 0.355   greenX: 0.334 greenY: 0.559
[   276.487] (II) intel(0): blueX: 0.149 blueY: 0.114   whiteX: 0.313 whiteY: 0.329
[   276.487] (II) intel(0): Manufacturer's mask: 0
[   276.487] (II) intel(0): Supported detailed timing:
[   276.487] (II) intel(0): clock: 75.2 MHz   Image Size:  277 x 156 mm
[   276.487] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1478 h_blank_end 1582 h_border: 0
[   276.487] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 792 v_border: 0
[   276.487] (II) intel(0):  LG Display
[   276.487] (II) intel(0):  LP125WH2-SLB3
[   276.487] (II) intel(0): EDID (in hex):
[   276.487] (II) intel(0): 	00ffffffffffff0030e4d80200000000
[   276.487] (II) intel(0): 	00160103801c1078ea8855995b558f26
[   276.487] (II) intel(0): 	1d505400000001010101010101010101
[   276.487] (II) intel(0): 	010101010101601d56d8500018303040
[   276.487] (II) intel(0): 	4700159c1000001b0000000000000000
[   276.487] (II) intel(0): 	00000000000000000000000000fe004c
[   276.487] (II) intel(0): 	4720446973706c61790a2020000000fe
[   276.487] (II) intel(0): 	004c503132355748322d534c42330059
[   276.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   276.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   276.488] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   276.488] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   276.488] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   276.488] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   276.488] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   276.488] (II) intel(0): Printing probed modes for output LVDS1
[   276.488] (II) intel(0): Modeline "1366x768"x60.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[   276.488] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   276.488] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   276.488] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   276.488] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   276.613] (II) intel(0): EDID for output VGA1
[   276.613] (II) intel(0): Manufacturer: SAM  Model: 525  Serial#: 1280455219
[   276.613] (II) intel(0): Year: 2009  Week: 45
[   276.613] (II) intel(0): EDID Version: 1.3
[   276.613] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   276.613] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[   276.613] (II) intel(0): Max Image Size [cm]: horiz.: 51  vert.: 29
[   276.613] (II) intel(0): Gamma: 2.20
[   276.613] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[   276.613] (II) intel(0): First detailed timing is preferred mode
[   276.613] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   276.613] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   276.613] (II) intel(0): Supported established timings:
[   276.613] (II) intel(0): 640x480@60Hz
[   276.613] (II) intel(0): 800x600@56Hz
[   276.613] (II) intel(0): 800x600@60Hz
[   276.613] (II) intel(0): 1024x768@60Hz
[   276.614] (II) intel(0): Manufacturer's mask: 0
[   276.614] (II) intel(0): Supported standard timings:
[   276.614] (II) intel(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[   276.614] (II) intel(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   276.614] (II) intel(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   276.614] (II) intel(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[   276.614] (II) intel(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[   276.614] (II) intel(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[   276.614] (II) intel(0): Supported detailed timing:
[   276.614] (II) intel(0): clock: 148.5 MHz   Image Size:  510 x 287 mm
[   276.614] (II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[   276.614] (II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[   276.614] (II) intel(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[   276.614] (II) intel(0): Monitor name: SyncMaster
[   276.614] (II) intel(0): Serial No: H9MSB01031
[   276.614] (II) intel(0): EDID (in hex):
[   276.614] (II) intel(0): 	00ffffffffffff004c2d25053332524c
[   276.614] (II) intel(0): 	2d1301030e331d782aee91a3544c9926
[   276.614] (II) intel(0): 	0f50542308008100814081809500a940
[   276.614] (II) intel(0): 	b30001010101023a801871382d40582c
[   276.614] (II) intel(0): 	4500fe1f1100001e000000fd00383c1e
[   276.614] (II) intel(0): 	5111000a202020202020000000fc0053
[   276.614] (II) intel(0): 	796e634d61737465720a2020000000ff
[   276.614] (II) intel(0): 	0048394d534230313033310a2020009b
[   276.614] (II) intel(0): Printing probed modes for output VGA1
[   276.614] (II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   276.614] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   276.614] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   276.614] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   276.614] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   276.614] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   276.614] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   276.614] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   276.614] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   276.614] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   276.614] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   276.640] (II) intel(0): EDID for output HDMI1
[   276.680] (II) intel(0): EDID for output DP1
[   276.693] (II) intel(0): EDID for output HDMI2
[   276.706] (II) intel(0): EDID for output HDMI3
[   276.746] (II) intel(0): EDID for output DP2
[   276.786] (II) intel(0): EDID for output DP3
[   276.786] (II) intel(0): Output LVDS1 connected
[   276.786] (II) intel(0): Output VGA1 connected
[   276.786] (II) intel(0): Output HDMI1 disconnected
[   276.786] (II) intel(0): Output DP1 disconnected
[   276.786] (II) intel(0): Output HDMI2 disconnected
[   276.786] (II) intel(0): Output HDMI3 disconnected
[   276.786] (II) intel(0): Output DP2 disconnected
[   276.787] (II) intel(0): Output DP3 disconnected
[   276.787] (II) intel(0): Using fuzzy aspect match for initial modes
[   276.787] (II) intel(0): Output LVDS1 using initial mode 1024x768
[   276.787] (II) intel(0): Output VGA1 using initial mode 1024x768
[   276.787] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   276.787] (II) intel(0): Kernel page flipping support detected, enabling
[   276.787] (==) intel(0): DPI set to (96, 96)
[   276.787] (II) Loading sub module "fb"
[   276.787] (II) LoadModule: "fb"
[   276.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[   276.787] (II) Module fb: vendor="X.Org Foundation"
[   276.787] 	compiled for 1.14.0, module version = 1.0.0
[   276.787] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   276.787] (II) Loading sub module "dri2"
[   276.787] (II) LoadModule: "dri2"
[   276.788] (II) Module "dri2" already built-in
[   276.788] (==) Depth 24 pixmap format is 32 bpp
[   276.788] (II) intel(0): [DRI2] Setup complete
[   276.788] (II) intel(0): [DRI2]   DRI driver: i965
[   276.788] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   276.789] (II) UXA(0): Driver registered support for the following operations:
[   276.789] (II)         solid
[   276.789] (II)         copy
[   276.789] (II)         composite (RENDER acceleration)
[   276.789] (II)         put_image
[   276.789] (II)         get_image
[   276.789] (==) intel(0): Backing store disabled
[   276.789] (==) intel(0): Silken mouse enabled
[   276.789] (II) intel(0): Initializing HW Cursor
[   276.789] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   276.792] (==) intel(0): DPMS enabled
[   276.792] (==) intel(0): Intel XvMC decoder enabled
[   276.792] (II) intel(0): Set up textured video
[   276.792] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   276.792] (II) intel(0): direct rendering: DRI2 Enabled
[   276.792] (==) intel(0): hotplug detection: "enabled"
[   277.893] (--) RandR disabled
[   277.907] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   277.907] (II) AIGLX: enabled GLX_INTEL_swap_event
[   277.907] (II) AIGLX: enabled GLX_ARB_create_context
[   277.907] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   277.907] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   277.907] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   277.907] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   277.907] (II) AIGLX: Loaded and initialized i965
[   277.907] (II) GLX: Initialized DRI2 GL provider for screen 0
[   277.907] (II) intel(0): Setting screen physical size to 270 x 203
[   277.935] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   277.935] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   277.935] (II) LoadModule: "evdev"
[   277.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   277.935] (II) Module evdev: vendor="X.Org Foundation"
[   277.935] 	compiled for 1.14.0, module version = 2.8.0
[   277.935] 	Module class: X.Org XInput Driver
[   277.935] 	ABI class: X.Org XInput driver, version 19.1
[   277.935] (II) Using input driver 'evdev' for 'Power Button'
[   277.935] (**) Power Button: always reports core events
[   277.935] (**) evdev: Power Button: Device: "/dev/input/event3"
[   277.935] (--) evdev: Power Button: Vendor 0 Product 0x1
[   277.935] (--) evdev: Power Button: Found keys
[   277.935] (II) evdev: Power Button: Configuring as keyboard
[   277.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   277.935] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   277.935] (**) Option "xkb_rules" "evdev"
[   277.935] (**) Option "xkb_model" "evdev"
[   277.935] (**) Option "xkb_layout" "de"
[   277.935] (**) Option "xkb_variant" "nodeadkeys"
[   277.962] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   277.962] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   277.962] (II) Using input driver 'evdev' for 'Video Bus'
[   277.962] (**) Video Bus: always reports core events
[   277.962] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   277.962] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   277.962] (--) evdev: Video Bus: Found keys
[   277.962] (II) evdev: Video Bus: Configuring as keyboard
[   277.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[   277.962] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   277.962] (**) Option "xkb_rules" "evdev"
[   277.962] (**) Option "xkb_model" "evdev"
[   277.962] (**) Option "xkb_layout" "de"
[   277.962] (**) Option "xkb_variant" "nodeadkeys"
[   277.963] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   277.963] (II) No input driver specified, ignoring this device.
[   277.963] (II) This device may have been added with another device file.
[   277.963] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   277.963] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   277.963] (II) Using input driver 'evdev' for 'Sleep Button'
[   277.963] (**) Sleep Button: always reports core events
[   277.963] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   277.963] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   277.963] (--) evdev: Sleep Button: Found keys
[   277.963] (II) evdev: Sleep Button: Configuring as keyboard
[   277.963] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[   277.963] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   277.963] (**) Option "xkb_rules" "evdev"
[   277.963] (**) Option "xkb_model" "evdev"
[   277.963] (**) Option "xkb_layout" "de"
[   277.963] (**) Option "xkb_variant" "nodeadkeys"
[   277.964] (II) config/udev: Adding drm device (/dev/dri/card0)
[   277.965] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/event7)
[   277.965] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev pointer catchall"
[   277.965] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: Applying InputClass "evdev keyboard catchall"
[   277.965] (II) Using input driver 'evdev' for 'Microsoft Microsoft® SideWinder™ X5 Mouse'
[   277.965] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: always reports core events
[   277.965] (**) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Device: "/dev/input/event7"
[   277.965] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Using mtdev for this device
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Vendor 0x45e Product 0x736
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found 9 mouse buttons
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found scroll wheel(s)
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found relative axes
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y relative axes
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute axes
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found absolute multitouch axes
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found x and y absolute axes
[   277.965] (--) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Found keys
[   277.965] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as mouse
[   277.965] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Configuring as keyboard
[   277.965] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Adding scrollwheel support
[   277.965] (**) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: YAxisMapping: buttons 4 and 5
[   277.965] (**) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   277.965] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7/event7"
[   277.965] (II) XINPUT: Adding extended input device "Microsoft Microsoft® SideWinder™ X5 Mouse" (type: KEYBOARD, id 9)
[   277.965] (**) Option "xkb_rules" "evdev"
[   277.965] (**) Option "xkb_model" "evdev"
[   277.965] (**) Option "xkb_layout" "de"
[   277.965] (**) Option "xkb_variant" "nodeadkeys"
[   277.966] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: initialized for relative axes.
[   277.966] (WW) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: ignoring absolute axes.
[   277.966] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) keeping acceleration scheme 1
[   277.966] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration profile 0
[   277.966] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration factor: 2.000
[   277.966] (**) Microsoft Microsoft® SideWinder™ X5 Mouse: (accel) acceleration threshold: 4
[   277.966] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/js0)
[   277.966] (II) No input driver specified, ignoring this device.
[   277.966] (II) This device may have been added with another device file.
[   277.967] (II) config/udev: Adding input device Microsoft Microsoft® SideWinder™ X5 Mouse (/dev/input/mouse0)
[   277.967] (II) No input driver specified, ignoring this device.
[   277.967] (II) This device may have been added with another device file.
[   277.967] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[   277.967] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[   277.967] (II) Using input driver 'evdev' for 'Integrated Camera'
[   277.967] (**) Integrated Camera: always reports core events
[   277.967] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[   277.967] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
[   277.967] (--) evdev: Integrated Camera: Found keys
[   277.967] (II) evdev: Integrated Camera: Configuring as keyboard
[   277.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[   277.967] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[   277.967] (**) Option "xkb_rules" "evdev"
[   277.968] (**) Option "xkb_model" "evdev"
[   277.968] (**) Option "xkb_layout" "de"
[   277.968] (**) Option "xkb_variant" "nodeadkeys"
[   277.968] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   277.968] (II) No input driver specified, ignoring this device.
[   277.968] (II) This device may have been added with another device file.
[   277.969] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event10)
[   277.969] (II) No input driver specified, ignoring this device.
[   277.969] (II) This device may have been added with another device file.
[   277.969] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[   277.969] (II) No input driver specified, ignoring this device.
[   277.969] (II) This device may have been added with another device file.
[   277.969] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[   277.969] (II) No input driver specified, ignoring this device.
[   277.969] (II) This device may have been added with another device file.
[   277.970] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event13)
[   277.970] (II) No input driver specified, ignoring this device.
[   277.970] (II) This device may have been added with another device file.
[   277.970] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[   277.970] (II) No input driver specified, ignoring this device.
[   277.970] (II) This device may have been added with another device file.
[   277.970] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event15)
[   277.970] (II) No input driver specified, ignoring this device.
[   277.970] (II) This device may have been added with another device file.
[   277.971] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[   277.971] (II) No input driver specified, ignoring this device.
[   277.971] (II) This device may have been added with another device file.
[   277.971] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   277.971] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   277.971] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   277.971] (**) AT Translated Set 2 keyboard: always reports core events
[   277.971] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   277.971] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   277.971] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   277.971] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   277.971] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   277.971] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   277.971] (**) Option "xkb_rules" "evdev"
[   277.971] (**) Option "xkb_model" "evdev"
[   277.971] (**) Option "xkb_layout" "de"
[   277.971] (**) Option "xkb_variant" "nodeadkeys"
[   277.972] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[   277.972] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   277.972] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[   277.972] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   277.972] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event17"
[   277.972] (II) evdev: SynPS/2 Synaptics TouchPad: Using mtdev for this device
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[   277.972] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[   277.972] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[   277.972] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[   277.972] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   277.972] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
[   277.972] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   277.972] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[   277.973] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   277.973] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   277.973] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   277.973] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   277.973] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   277.973] (II) No input driver specified, ignoring this device.
[   277.973] (II) This device may have been added with another device file.
[   277.973] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[   277.973] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   277.973] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[   277.973] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[   277.974] (**) TPPS/2 IBM TrackPoint: always reports core events
[   277.974] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
[   277.974] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[   277.974] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[   277.974] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[   277.974] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[   277.974] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[   277.974] (**) Option "Emulate3Buttons" "false"
[   277.974] (**) Option "EmulateWheel" "true"
[   277.974] (**) Option "EmulateWheelButton" "2"
[   277.974] (**) Option "YAxisMapping" "4 5"
[   277.974] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   277.974] (**) Option "XAxisMapping" "6 7"
[   277.974] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[   277.974] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   277.974] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
[   277.974] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[   277.974] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[   277.974] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   277.974] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   277.974] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   277.974] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   277.975] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[   277.975] (II) No input driver specified, ignoring this device.
[   277.975] (II) This device may have been added with another device file.
[   277.975] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   277.975] (II) No input driver specified, ignoring this device.
[   277.975] (II) This device may have been added with another device file.
[   277.975] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[   277.975] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[   277.976] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   277.976] (**) ThinkPad Extra Buttons: always reports core events
[   277.976] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[   277.976] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[   277.976] (--) evdev: ThinkPad Extra Buttons: Found keys
[   277.976] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[   277.976] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[   277.976] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[   277.976] (**) Option "xkb_rules" "evdev"
[   277.976] (**) Option "xkb_model" "evdev"
[   277.976] (**) Option "xkb_layout" "de"
[   277.976] (**) Option "xkb_variant" "nodeadkeys"
[   278.014] (II) intel(0): EDID vendor "LGD", prod id 728
[   278.014] (II) intel(0): Printing DDC gathered Modelines:
[   278.014] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[   280.104] (II) evdev: ThinkPad Extra Buttons: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: TPPS/2 IBM TrackPoint: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: AT Translated Set 2 keyboard: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: Integrated Camera: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: Microsoft Microsoft® SideWinder™ X5 Mouse: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: Sleep Button: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: Video Bus: Close
[   280.104] (II) UnloadModule: "evdev"
[   280.104] (II) evdev: Power Button: Close
[   280.104] (II) UnloadModule: "evdev"
[   281.112] Server terminated successfully (0). Closing log file.

/var/log/Xorg.0.log.old ist die letzte Session?

Creshal schriebAlso keine Fehlermeldung. Meh. Ändert sich das X-Log generell nach dem xrandr-Aufruf?

Wenn ich versuche, via

xrandr --output LVDS1 -s 1024x768

Creshal schriebWeniger (sprich: kein) Geflimmer, schärfere Schriftkontraste, höhere Farbqualität, höhere Maximalauflösung, …

Vielleicht ist dieser MiniDPort auf DVI-Adapter doch nicht so eine schlechte Idee...

Edward d'Eath

Ovion schrieb Die Ausgabe von xrandr mit beiden Bildschirmen angesteckt, aber Laptopbildschirm in richtiger Auflösung:

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 277mm x 156mm
   1366x768       60.0*+
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected (normal left inverted right x axis y axis)
   1920x1080      60.0 +
   1600x1200      60.0  
   1680x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1280x800       59.8  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        60.0  
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)

Hi,

versuch mal das hier. Eventuell mußt Du die beiden Monitorbezeichnungen tauschen.

xrandr --output VGA1 --auto --left-of LVDS1 --output LVDS1 --auto

Hth,

Edward

[gelöscht]

Da die passende Auflösung als bevorzugt markiert ist, kannst du vielleicht mit --preferred arbeiten? --auto funktionierte bei mir auch nicht.
Ich habe zwei Bildschirme und regle das so:
(Keine Garantie, das das nicht ein hässlicher Hack ist, es funktioniert jedenfalls einwandfrei)

xrandr --output HDMI1 --preferred
xrandr --output HDMI3 --preferred --primary --left-of HDMI1

Ovion

Himmel, Arsch und Zwirn, ich hab's! Es waren Verhaltensweisen von xrandr, die ich so nicht erwartet habe, kombiniert mit Informationen, von denen ich nicht erwartet habe, das xrandr sie zu dem Zeitpunkt schon hat.

Das Problem lag darin, dass xrandr bei angesteckten externen Bildschirm dessen Auflösungen und Modi abfragen konnte, obwohl das Gerät gar nicht an war. Mir war nicht bewusst, dass der Bildschirm dann überhaupt komplett erkannt wird. Eingentlich hätte ich somit stutzen müssen, als im oben geposteten Log überhaupt der VGA-Eingang als connected aufgeführt war, aber da ich da schon zig xrandr-Befehlskombis ausprobiert hatte, fällt das wohl unter Betriebsblindheit.
Da xrandr im Normalfall auf beide Bildschirme dasselbe Bild legt und 1024x768 die kleinste gemeinsame Auflösung der beiden Bildschirme ist (was mir wie gesagt nicht aufgefallen ist, weil ich auch nie auf die Idee gekommen wäre, den 1080p-Bildschirm mit 1024x768p zu fahren), hat xrandr sich dafür entschieden. Soviel zu Infos, von denen ich nicht wusste, dass xrandr sie zu dem Zeitpunkt schon hat (noch dazu, weil er sie sogar abfragen kann, wenn der Bildschirm vom Stromnetz getrennt ist, WTF? Strom kommt offensichtlich vom VGA-Ausgang, damit hatte ich definitiv nicht gerechnet).
Was das Verhalten von xrandr angeht, durfte ich beim inspirieren-Lassen durch eure Vorschläge feststellen, dass es nicht reicht, xrandr zu sagen, dass die Bildschirme nebeneinander liegen, nein, ich muss explizit beide Displays mit --output ansteuern und für beide Displays das --auto separat absetzen. Ich nahm an, wenn ich mit --left-of klare Geometrien schaffe, dass --auto das dann entsprechend erkennen würde. Eine Fehleinschätzung, wie ich feststellen musste.
Dementsprechend funktioniert --preferred für's Laptopdisplay auch wunderbar, DANN richtet sich der Zweitbildschirm danach (mit 'nem schwarzen Rand, wenn ich das richtig gesehen habe, aber immerhin).

Was ich nun in meiner .xinitrc habe, ist:

xrandr --output LVDS1 --auto --primary --output VGA1 --auto --right-of LVDS1

#Woll'n mal sehen, was passiert, wenn ich mir den DisplayPort-auf-DVI-Adapter besorge, falls das Phänomen wieder auftritt, kommt noch diese Zeile nach der ersten mit rein:
#xrandr --output LVDS1 --preferred --primary

Funktioniert so (ohne die letzten Zeilen) auch mit nur einem Display. Halleluja, schwere Geburt. Mal sehen, was nun bei anderen Ausgängen passiert. Jetzt weiß ich aber immerhin, wie der Hase läuft.

Euch dreien mein herzliches Dankeschön!

Und die Moral von der Geschicht:
Auf "Aus"-Knöppe verlass dich nicht!
Desweiteren bedenke klar,
die Syntax von xrandr!