Hallo,
Ich habe einen Creative Zen Stone 1 GB MP3 Player und folgendes Problem:
-wird zwar erkannt jedoch nur als normaler USB Stick
-wahrscheinlich gab es ein Problem beim umounten (der Rechner blieb stehen bzw fror ein deswegen entschloss ich mich zum Neustart)
Lösungsansätze:
-es gibt zwar von Creative ein MP3 Recovery Tool, welches allerdings nur unter WinXP bzw Win7 lauffähig ist, mit diesem sollte es möglich sein den MP3 Player wieder zum Laufen zu bringen
-mit dem Tool Testdisk
Ich verstehe allerdings nicht warum eine Formatierung unter Linux erfolglos ist. Ich dachte ich frage hier im Forum an inwiefern jemand ein ähnliches Problem hat bzw sich damit auskennt. Vorerst schon mal vielen Dank für das Lesen.
mfg
raleeha
P.S. Achso hätt ich beinah vergessen; nutze Arch Linux in der Virtual Box; mein Wirtssystem ist ein auf Slackware 13.37 basierendes Vector Linux 7.0 RC1 (2.6.38.4)
[ 287.018901] Initializing USB Mass Storage driver...
[ 287.019371] scsi2 : usb-storage 1-2:1.0
[ 287.022012] usbcore: registered new interface driver usb-storage
[ 287.022030] USB Mass Storage support registered.
[ 287.032169] usbcore: registered new interface driver uas
[ 288.039922] scsi 2:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4
[ 288.047987] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 288.058062] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB)
[ 288.067909] sd 2:0:0:0: [sdb] Write Protect is off
[ 288.067931] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 288.067945] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 288.098805] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB)
[ 288.107894] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 288.117611] sdb: sdb1
[ 288.138791] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB)
[ 288.147706] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 288.147738] sd 2:0:0:0: [sdb] Attached SCSI removable disk
fdisk -l /dev/sdb
Hinweis: Die Sektorgröße ist 2048 (nicht 512)
Platte /dev/sdb: 990 MByte, 990904320 Byte
30 Köpfe, 63 Sektoren/Spur, 256 Zylinder, zusammen 483840 Sektoren
Einheiten = Sektoren von 1 × 2048 = 2048 Bytes
Sector size (logical/physical): 2048 bytes / 2048 bytes
I/O size (minimum/optimal): 2048 bytes / 2048 bytes
Disk identifier: 0x00053710
Gerät boot. Anfang Ende Blöcke Id System
/dev/sdb1 512 483839 966656 b W95 FAT32
dosfsck /dev/sdb
dosfsck 3.0.11, 24 Dec 2010, FAT32, LFN
Currently, only 1 or 2 FATs are supported, not 251.
e2fsck /dev/sdb
e2fsck 1.41.14 (22-Dec-2010)
e2fsck: Superblock ungültig versuche es mit Backup-Blöcken...
e2fsck: Bad magic number in super-block beim Versuch, /dev/sdb zu öffnen
SuperBlock ist unlesbar bzw. beschreibt kein gültiges ext2
Dateisystem. Wenn Gerät gültig ist und ein ext2
Dateisystem (kein swap oder ufs usw.) enthält, dann ist der SuperBlock
beschädigt, und sie könnten e2fsck mit einem anderen SuperBlock:
e2fsck -b 8193 <Gerät>
dosfsck -v /dev/sdb1
dosfsck 3.0.11 (24 Dec 2010)
dosfsck 3.0.11, 24 Dec 2010, FAT32, LFN
Checking we can access the last sector of the filesystem
Warning: Filesystem is FAT32 according to fat_length and fat32_length fields,
but has only 60382 clusters, less than the required minimum of 65525.
This may lead to problems on some systems.
Boot sector contents:
System ID "mkdosfs"
Media byte 0xf8 (hard disk)
2048 bytes per logical sector
16384 bytes per cluster
32 reserved sectors
First FAT starts at byte 65536 (sector 32)
2 FATs, 32 bit entries
245760 bytes per FAT (= 120 sectors)
Root directory start at cluster 2 (arbitrary size)
Data area starts at byte 557056 (sector 272)
60382 data clusters (989298688 bytes)
63 sectors/track, 30 heads
0 hidden sectors
483328 sectors total
Checking for unused clusters.
Checking free cluster summary.
df -h /dev/sdb
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
udev 10M 0 10M 0% /dev
Disk /dev/sdc - 990 MB / 945 MiB - CHS 256 30 63
Warning: the current number of heads per cylinder is 30
but the correct value may be 255.
You can use the Geometry menu to change this value.
It's something to try if
- some partitions are not found by TestDisk
- or the partition table can not be written because partitions overlaps.