Arch Linux

Kein Erkennen der Partitionen auf einen Win-Rechner

tomgom

Hallo allesamt,

ich wollte den auf dem Rechner meiner Kids mit einer SATA-Platte, auf dem WinXP installiert ist, ARCHLinux installieren. Mittels eines Win-Partionsprogrammes legte ich eine 2 primäre Partition als FAT32 (100 GB) an, um diese dann später für Linux (natürlich umformatiert) herzunehmen. Allerdings werden alle Partitionen unter der LiveCD-Version 08-2009 nicht erkannt.

Auch habe ich versucht mit einer PartedMagic 4.8 auf die Win-Partitionen zuzugreifen, auch hier werden alle Partitionen nicht erkannt, selbst die FAT32-Partition nicht. Bei den NTFS-Partionen war ich mir nicht sicher, ob diese von PartedMagic erkannt werden, aber die primäre FAT32-Partition dürfte doch kein Problem sein ?

Unter Windows XP kann ich ordnungsgemäß auf alle angelegten Partitionen zugreifen, "versteckt" sind die Partitionen laut dem Win-Partitionsprogramm nicht - irgendwie verstehe ich dies nicht.

Hat jemand eine Ahnung, woran es hier hakt ?

mpausch

starte doch mal mit der ArchLinux-CD und führe den Befehl "fdisk -l" aus.
da dürfte dann sowas in der Art rauskommen:

# fdisk -l

Platte /dev/sda: 640.1 GByte, 640135028736 Byte
255 Köpfe, 63 Sektoren/Spur, 77825 Zylinder, zusammen 1250263728 Sektoren
Einheiten = Sektoren von 1 × 512 = 512 Bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf8000000

   Gerät  boot.     Anfang        Ende     Blöcke   Id  System
/dev/sda1   *           63      160649       80293+  7  HPFS/NTFS
/dev/sda2         161792   204961791   102400000    b  W95 FAT32

die Partition die Du angelegt hast sollte vom Typ/Id "83 Linux" sein. (ob sich Linux dran stört wenn eine andere ID drin steht, weiss ich nicht, hab ich auch noch nie ausprobiert).
Ändern kannst Du den Partitonstyp mit

fdisk /dev/sdX        #X durch entspr. Buchstaben ersetzen (wenn nur 1 Platte drin ist, wirds /dev/sda sein)
t <enter>             #zum ändern des Partitionstyps
<Partitionsnummer eingeben> <enter> #welche Partition?
83 <enter>            #Dateisystemtyp?
w                     #zum schreiben der neuen Partitionstabelle auf die Platte

nach einem neuen "fdisk -l" sollte es dann etwa so aussehen:


   Gerät  boot.     Anfang        Ende     Blöcke   Id  System
/dev/sda1   *           63      160649       80293+  7  HPFS/NTFS
/dev/sda2         161792   204961791   102400000    83  Linux

in der Arch Installationsroutine musst Du dann diese Partition als root-Partition bzw / auswählen und mit einem geeigneten Filesystem (ext2/3/4, ....) formatieren lassen. Je nach Menge des Arbeitsspeichers und ob Du Suspend2Disk nutzen willst, empfiehlt sich noch eine SWAP-Partition anzulegen.

tomgom

Hallo mpausch,

danke für die Antwort - wenn ich PartEdMagic von der LiveCd und "fdisk -l" eingebe, so passiert nichts. Die Festplatte wird nicht erkannt - Windows startet aber ohne Probleme.

mpausch

schon mal mit der aktuellen Arch-CD (2010.05) probiert? http://www.archlinux.org/download/

tomgom

Nein, noch nicht. Aber ich glaube nicht, daß es funktioniert. Ich habe die neue PartEdMagic 5.2 als LiveCD ausprobiert. Wenn ich dort auf der Konsole testdisk starte, kommt der Befehl "no harddisk", obwohl ja definitiv eine vorhanden ist. Unter Linux wird die Festplatte nicht erkannt.

[gelöscht]

Vielleicht erkennt die PartedMagic Live-CD den S-ATA Controller und somit auch die Festplatten nicht. Probiere es mal mit der Arch 2010.05 CD, ob die Festplatte dort gefunden wird. Wenn Windows booten kann aber Linux die Platte nicht finden kann / will, so liegt es meistens an fehlenden Modulen im Kernel. Gegenfalls auch per 'dmesg | grep ata' nachschauen, ob da sich überhaupt was rührt. Die Ausgabe am Rechner meiner Eltern sieht beispielsweise wie folgt aus:

 BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
 modified: 000000005fff3000 - 0000000060000000 (ACPI data)
Memory: 1544244k/1572800k available (2930k kernel code, 28104k reserved, 1208k data, 404k init, 663496k highmem) .data : 0xc12dca4c - 0xc140adc0   (1208 kB)
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
pata_acpi 0000:00:07.0: setting latency timer to 64
pata_acpi 0000:00:07.0: PCI INT A disabled
pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
sata_nv 0000:00:07.0: version 3.5
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 23
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 23
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 22
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 22
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4040B, A300, max UDMA/33
ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:120:0x1b)
ata1.00: configured for UDMA/33
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda3): mounted filesystem with ordered data mode
EXT3-fs (sda1): mounted filesystem with writeback data mode
EXT4-fs (sda4): mounted filesystem with ordered data mode

tomgom

Die archLive-CD 2010.05 funktioniert leider auch nicht. Der "dmesg | grep ata" wirft unter anderem mehere Fehlermedlungen derart aus:

......
sata 3.00: qc timeout (cmd 0xec)
sata 3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
......

das heißt wohl der SATA-Controller wird nicht erkannt. Das ist das erste Mal, daß ich dies miterlebe - das Board ist selbst schon mindestens 2 Jahre alt - nun denn. Auf alle Fälle: Danke für die Mühen.

[gelöscht]

Dein S-ATA Controller wurde erkannt aber anscheinend ist deine Festplatte ein wenig schüchtern, denn diese möchte dem System nicht sagen wer sie ist. Somit könnte es auch ein Fehler der Festplatten-Elektronik sein. Ein ähnlicher Fehler trat bei meinen Eltern am alten PC mit S-ATA auf. Nachdem ich den PC mit dem Kernelparameter "acpi=off" gebootet hatte, funktionierte dies plötzlich.

Aber wie gesagt: S-ATA Controller wird erkannt aber die Festplatte möchte oder kann sich nicht identifizieren.

tomgom

Vielen Dank für den Tip, ich werde es ausprobieren, "acpi" auszuschalten.

tomgom

Das Wegschalten des ACPI sowohl über das Bios wie auch per "Schalter" beim Booten der LiveCD hat leider nichts gebracht.

[gelöscht]

Was hast du denn für ne Festplatte? Also Hersteller und Typenbezeichnung. Vielleicht spuckt Onkel Google was aus.

mpausch

starte mal mit der Arch-CD und poste die Ausgaben von "lspci -v" und "lsscsi"

tomgom

Das hat nun etwas gedauert - war gar nicht so leicht, den Auswurf von "lspci -v" von der LiveCD in eine Datei zu bannen und dann auf meinen Rechner zu verfrachten, der mit dem Internet verbunden ist.

Also hier nun "lspci -v":

00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [94] HyperTransport: #1a
Capabilities: [60] HyperTransport: Retry Mode
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [d0] HyperTransport: #1c

00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 2f00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: 66MHz, fast devsel, IRQ 11
I/O ports at 2900 [size=64]
I/O ports at 2d00 [size=64]
I/O ports at 2e00 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: 66MHz, fast devsel

00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 15
Memory at fbf80000 (32-bit, non-prefetchable) [size=512K]

00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: 66MHz, fast devsel

00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fbf7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1) (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fbf7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fbf7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1) (prog-if 20 [EHCI])
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fbf7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 340b
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd
Kernel modules: ata_generic, pata_acpi, pata_amd, ide-pci-generic, amd74xx

00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: Biostar Microtech Int'l Corp Device 820f
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fbf78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Capabilities: [b8] Subsystem: Biostar Microtech Int'l Corp Device 340b
Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-

00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Biostar Microtech Int'l Corp Device 5409
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 29
I/O ports at c480 [size=8]
I/O ports at c400 [size=4]
I/O ports at c080 [size=8]
I/O ports at c000 [size=4]
I/O ports at bc00 [size=16]
Memory at fbf76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Capabilities: [8c] SATA HBA v1.0
Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: ahci
Kernel modules: ata_generic, pata_acpi, ahci, ide-pci-generic

00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fc000000-feafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Subsystem: Biostar Microtech Int'l Corp Device 340b
Capabilities: [48] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport
Kernel modules: shpchp

00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Subsystem: Biostar Microtech Int'l Corp Device 340b
Capabilities: [48] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport
Kernel modules: shpchp

00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Capabilities: [40] Subsystem: Biostar Microtech Int'l Corp Device 340b
Capabilities: [48] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport
Kernel modules: shpchp

00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Capabilities: [40] Subsystem: Biostar Microtech Int'l Corp Device 340b
Capabilities: [48] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport
Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp

02:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7300 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0803
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at dc00 [size=128]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Kernel modules: nvidiafb

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Biostar Microtech Int'l Corp Device 2307
Flags: bus master, fast devsel, latency 0, IRQ 28
I/O ports at e800 [size=256]
Memory at febff000 (64-bit, non-prefetchable) [size=4K]
Memory at faff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at febc0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 68-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
Kernel modules: r8169

Das Kommando "lsscsi" ist auf der Konsole der LiveCD nicht bekannt - auch auf meinem ARCHLinux-Rechner gibt es diesen Befehl nicht.

Anbei noch der Festplattentyp des Windows-Rechners:

S)ATA/ATAPI Drives -------------------------------------------------------

WDC WD3200AAKS-00VYA0 -----------------------------------------------------

[General Information]
Drive Controller: Serial ATA 3Gb/s
Drive Model: WDC WD3200AAKS-00VYA0
Drive Revision: 12.01B02
Drive Serial Number: WD-WCARW1767379
Drive Capacity: 305,245 MBytes (320 GB)
Drive Capacity [MB]: 305245
[Drive Geometry]
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Bytes Per Sector: Unknown
Bytes Per Track: Unknown
Number Of ECC Bytes: 50
Number of Sectors: 16514064
Total 32-bit LBA Sectors: 268435455
Total 48-bit LBA Sectors: 625142448
Cache Buffer Size: 16384 KBytes
Controller Type: Not Specified
[Transfer Modes]
Sectors Per Interrupt: Total: 16, Active: 16
Max. PIO Transfer Mode: 4
Multiword DMA Mode: Total: 2, Active: -
Singleword DMA Mode: Total: -, Active: -
Ultra-DMA Mode: Total: 6 (ATA-133), Active: 6 (ATA-133)
Max. Multiword DMA Transfer Rate: 16.7 MBytes/s
Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s
Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s
Transfer Width: 16-bit
Native Command Queuing: Supported, Max. Depth: 32
TRIM Command: Not Supported
[Device flags]
Fixed Drive: Present
Removable Drive: Not Present
Magnetic Storage: Present
LBA Mode: Supported
DMA Mode: Supported
IORDY: Supported
IORDY Disableable: Supported
[Features]
Write Cache: Present, Active
S.M.A.R.T. Feature: Present, Active
Security Feature: Present, Inactive
Removable Media Feature: Not Present, Disabled
Power Management: Present, Active
Advanced Power Management: Not Present, Inactive
Packet Interface: Not Present, Disabled
Look-Ahead Buffer: Present, Active
Host Protected Area: Present, Enabled
Power-Up In Standby: Supported, Inactive
Automatic Acoustic Management: Supported, Inactive
48-bit LBA: Supported, Active
[Self-Monitoring, Analysis and Reporting Technology]
Raw Read Error Rate: 200/51, Worst: 200 (Data = 106)
Spin Up Time: 159/21, Worst: 152 (Data = 5041)
Start/Stop Count: 99/Always OK, Worst: 99 (Data = 1231)
Reallocated Sector Count: 200/140, Worst: 200
Seek Error Rate: 200/51, Worst: 200
Power-On Time Count: 93/Always OK, Worst: 93 (Data = 5531)
Spin Retry Count: 100/51, Worst: 100
Calibration Retry Count: 100/51, Worst: 100
Power Cycle Count: 100/Always OK, Worst: 100 (Data = 769)
Power-Off Retract Count: 200/Always OK, Worst: 200 (Data = 458)
Load/Unload Cycle Count: 200/Always OK, Worst: 200 (Data = 1231)
Temperature 111/Always OK, Worst: 87 (Data = 36.0 C)
Reallocation Event Count: 200/Always OK, Worst: 200
Current Pending Sector Count: 200/Always OK, Worst: 200
Off-Line Uncorrectable Sector Count: 200/Always OK, Worst: 200
Ultra ATA CRC Error Rate: 200/Always OK, Worst: 190 (Data = 10211)
Write Error Rate: 200/51, Worst: 200

mpausch

tomgom schrieb......
sata 3.00: qc timeout (cmd 0xec)
sata 3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
......

dazu hab ich nochwas gefunden:
http://www.opensubscriber.com/message/jgarzik@pobox.com/8679548.html

da hat's anscheinend geholfen, mit der Kernel-Option "noapic" zu booten.

mpausch

tomgom schrieb
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Biostar Microtech Int'l Corp Device 5409
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 29
I/O ports at c480 [size=8]
I/O ports at c400 [size=4]
I/O ports at c080 [size=8]
I/O ports at c000 [size=4]
I/O ports at bc00 [size=16]
Memory at fbf76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
Capabilities: [8c] SATA HBA v1.0
Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: ahci
Kernel modules: ata_generic, pata_acpi, ahci, ide-pci-generic

SATA Controller scheint ordnungsgemäß erkannt zu werden.

tomgom schrieb Das Kommando "lsscsi" ist auf der Konsole der LiveCD nicht bekannt - auch auf meinem ARCHLinux-Rechner gibt es diesen Befehl nicht.

sorry, das hab ich ja aus dem AUR (http://aur.archlinux.org/packages.php?ID=25202)
keine Ahnung, warum Arch das nicht standardmäßig mitbringt.

tomgom

Auch mit "noapic" klappt es nicht. Was ich nicht verstehe, wenn der SATA-Controller ordnungsgemäß erkannt wird und die WD-Platte zu scheu ist, ihre Identität preis zu geben, warum klappt es dann beim Windows-Start?

[gelöscht]

Dein S-ATA Controller arbeitet aktuell im IDE-Legacy Modus (non-AHCI Mode). Schalte im BIOS mal auf AHCI um (irgndwo ging das). Deine Festplatte WDC WD3200AAKS kenne ich selbst und mich wundert, dass diese nicht unter Linux an einem nVidia S-ATA Controller will. Es kann nun mehrere Ursachen haben, was da ggf. schief geht aber hast du ggf. die Möglichkeit mit einer anderen S-ATA HDD zu testen? Wenn bei dieser ähnliche Probleme auftreten, so scheint der S-ATA Controller nicht so richtig zu wollen, wenn doch => Festplattenproblem.

Irgendwie müssen wir das doch in den Griff bekommen.

mpausch

poste (oder pastebin) doch mal den ganzen Output von dmesg...
vielleicht steht da noch was interessantes drin

tomgom

Sorry ob der späten Antwort, war allerdings außer Haus und somit nicht am PC. Hier nun der Auswurf des dmesg-befehls, allerdings hat etwas beim Schreiben der Modulmeldungen nicht mehr gepaßt - nur Hieroglyphen. Aber die Bootmeldungen sollten alle dabei sein.

Hier nun das dmesg-Listing:

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000cffa0000 (usable)
modified: 00000000cffa0000 - 00000000cffae000 (ACPI data)
modified: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
modified: 00000000cfff0000 - 00000000d0000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000fff00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000130000000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
init_memory_mapping: 0000000000000000-00000000cffa0000
0000000000 - 00cfe00000 page 2M
00cfe00000 - 00cffa0000 page 4k
kernel direct mapping tables up to cffa0000 @ 16000-1c000
init_memory_mapping: 0000000100000000-0000000130000000
0100000000 - 0130000000 page 2M
kernel direct mapping tables up to 130000000 @ 1a000-20000
RAMDISK: 7f7f8000 - 7fffe9b5
ACPI: RSDP 00000000000f9960 00014 (v00 ACPIAM)
ACPI: RSDT 00000000cffa0000 00040 (v01 050608 RSDT1744 20080506 MSFT 00000097)
ACPI: FACP 00000000cffa0200 00084 (v01 050608 FACP1744 20080506 MSFT 00000097)
ACPI: DSDT 00000000cffa0450 086F5 (v01 MCP78 MCP78007 00000007 INTL 20051117)
ACPI: FACS 00000000cffae000 00040
ACPI: APIC 00000000cffa0390 00080 (v01 050608 APIC1744 20080506 MSFT 00000097)
ACPI: MCFG 00000000cffa0410 0003C (v01 050608 OEMMCFG 20080506 MSFT 00000097)
ACPI: OEMB 00000000cffae040 00073 (v01 050608 OEMB1744 20080506 MSFT 00000097)
ACPI: HPET 00000000cffa8b50 00038 (v01 050608 OEMHPET0 20080506 MSFT 00000097)
ACPI: NVHD 00000000cffae0c0 00284 (v01 050608 NVHDCP 20080506 MSFT 00000097)
ACPI: SSDT 00000000cffa8b90 00248 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [007f7f8000 - 007fffe9b5] RAMDISK ==> [007f7f8000 - 007fffe9b5]
#3 [00016d8000 - 00016d80e5] BRK ==> [00016d8000 - 00016d80e5]
#4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#6 [000009f000 - 00000fbec0] BIOS reserved ==> [000009f000 - 00000fbec0]
#7 [00000fbfec - 00000ff780] BIOS reserved ==> [00000fbfec - 00000ff780]
#8 [00000fbec0 - 00000fbfec] MP-table mpc ==> [00000fbec0 - 00000fbfec]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 000001a000] PGTABLE ==> [0000016000 - 000001a000]
#12 [000001a000 - 000001b000] PGTABLE ==> [000001a000 - 000001b000]
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cffa0
0: 0x00100000 -> 0x00130000
On node 0 totalpages: 1048367
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3820 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 833496 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
PM: Registered nosave memory: 00000000cffae000 - 00000000cfff0000
PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880005400000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031236
Kernel command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 74000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 3979376k/4980736k available (3449k kernel code, 787268k absent, 213124k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2299.543 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.71 BogoMIPS (lpj=7665143)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) X2 Dual Core Processor BE-2400 stepping 02
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (9202.37 BogoMIPS).
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [2000, 2fff]
TOM: 00000000d0000000 aka 3328M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, fe0bffff]
TOM2: 0000000130000000 aka 4864M
bus: [00, 07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [d0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [130000000, fcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI Warning: Incorrect checksum in table [OEMB] - 95, should be 88 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:01.0: reg 10: [io 0x2f00-0x2fff]
pci 0000:00:01.1: reg 10: [io 0x2900-0x293f]
pci 0000:00:01.1: reg 20: [io 0x2d00-0x2d3f]
pci 0000:00:01.1: reg 24: [io 0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.3: reg 10: [mem 0xfbf80000-0xfbffffff]
pci 0000:00:02.0: reg 10: [mem 0xfbf7f000-0xfbf7ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfbf7ec00-0xfbf7ecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xfbf7d000-0xfbf7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0xfbf7e800-0xfbf7e8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:07.0: reg 10: [mem 0xfbf78000-0xfbf7bfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: reg 10: [io 0xc480-0xc487]
pci 0000:00:09.0: reg 14: [io 0xc400-0xc403]
pci 0000:00:09.0: reg 18: [io 0xc080-0xc087]
pci 0000:00:09.0: reg 1c: [io 0xc000-0xc003]
pci 0000:00:09.0: reg 20: [io 0xbc00-0xbc0f]
pci 0000:00:09.0: reg 24: [mem 0xfbf76000-0xfbf77fff]
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:02:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0xdc00-0xdc7f]
pci 0000:02:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:10.0: bridge window [mem 0xfc000000-0xfeafffff]
pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 03-03]
pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
pci 0000:04:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:04:00.0: reg 20: [mem 0xfaff0000-0xfaffffff 64bit pref]
pci 0000:04:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io 0xe000-0xefff]
pci 0000:00:13.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:13.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 05-05]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.MXR0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x080f] has been reserved
system 00:07: [io 0x2000-0x207f] has been reserved
system 00:07: [io 0x2080-0x20ff] has been reserved
system 00:07: [io 0x2400-0x247f] has been reserved
system 00:07: [io 0x2480-0x24ff] has been reserved
system 00:07: [io 0x2800-0x287f] has been reserved
system 00:07: [io 0x2880-0x28ff] has been reserved
system 00:07: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [io 0x0a00-0x0a0f] has been reserved
system 00:0c: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: [io 0x0a20-0x0a2f] has been reserved
system 00:0c: [io 0x0a30-0x0a3f] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0: bridge window [io disabled]
pci 0000:00:08.0: bridge window [mem disabled]
pci 0000:00:08.0: bridge window [mem pref disabled]
pci 0000:00:10.0: PCI bridge to [bus 02-02]
pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:10.0: bridge window [mem 0xfc000000-0xfeafffff]
pci 0000:00:10.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 03-03]
pci 0000:00:12.0: bridge window [io disabled]
pci 0000:00:12.0: bridge window [mem disabled]
pci 0000:00:12.0: bridge window [mem pref disabled]
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io 0xe000-0xefff]
pci 0000:00:13.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:13.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 05-05]
pci 0000:00:14.0: bridge window [io disabled]
pci 0000:00:14.0: bridge window [mem disabled]
pci 0000:00:14.0: bridge window [mem pref disabled]
pci 0000:00:08.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16
pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:14.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:07.0: Enabling HT MSI Mapping
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8218k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1282320653.803:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7918
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:10.0: setting latency timer to 64
pcieport 0000:00:10.0: irq 24 for MSI/MSI-X
pcieport 0000:00:12.0: setting latency timer to 64
pcieport 0000:00:12.0: irq 25 for MSI/MSI-X
pcieport 0000:00:13.0: setting latency timer to 64
pcieport 0000:00:13.0: irq 26 for MSI/MSI-X
pcieport 0000:00:14.0: setting latency timer to 64
pcieport 0000:00:14.0: irq 27 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbf7ec00
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 28 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000072000, 00:e0:4d:8d:04:90, XID 1c2000c0 IRQ 28
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xfbf7e800
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
pata_acpi 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:09.0: setting latency timer to 64
pata_acpi 0000:00:09.0: PCI INT A disabled
ahci 0000:00:09.0: version 3.0
ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:09.0: irq 29 for MSI/MSI-X
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
ahci 0000:00:09.0: setting latency timer to 64
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Floppy drive(s): fd0 is 1.44M
scsi0 : ahci
scsi1 : ahci
FDC 0 is a post-1991 82077
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76100 irq 29
ata2: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76180 irq 29
ata3: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76200 irq 29
ata4: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76280 irq 29
ata5: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76300 irq 29
ata6: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76380 irq 29
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 20, io mem 0xfbf7f000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi6 : pata_amd
scsi7 : pata_amd
ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 23, io mem 0xfbf7d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
ata7.01: ATAPI: TOSHIBA DVD-ROM SD-R5002, 1031, max UDMA/33
ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
ata7.00: configured for UDMA/33
ata7.01: configured for UDMA/33
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-6: new high speed USB device using ehci_hcd and address 4
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 3-2: new low speed USB device using ohci_hcd and address 2
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
scsi 8:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: SATA link up <unknown> (SStatus 103 SControl 310)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
scsi 6:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
scsi 6:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-R5002 1031 PQ: 0 ANSI: 5
ata8: port disabled. ignoring.
usbcore: registered new interface driver hiddev
sd 8:0:0:0: [sda] 3963904 512-byte logical blocks: (2.02 GB/1.88 GiB)
sd 8:0:0:0: [sda] Write Protect is off
sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 8:0:0:0: [sda] Assuming drive cache: write through
input: Chicony Chicony wired mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input2
generic-usb 0003:04F2:0718.0001: input,hidraw0: USB HID v1.11 Mouse [Chicony Chicony wired mouse] on usb-0000:00:02.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 8:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
sd 8:0:0:0: [sda] Assuming drive cache: write through
sd 8:0:0:0: [sda] Attached SCSI removable disk
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
sr 6:0:1:0: Attached scsi CD-ROM sr1
sd 8:0:0:0: Attached scsi generic sg0 type 0
sr 6:0:0:0: Attached scsi generic sg1 type 5
sr 6:0:1:0: Attached scsi generic sg2 type 5
UDF-fs: Partition marked readonly; forcing readonly mount
aufs 2-standalone.tree-33-20100426
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs test_add:248:mount[897]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777
aufs test_add:248:mount[902]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777
udev: starting version 151
input: PC Speaker as /devices/platform/pcspkr/input/input3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (18 C)
IT8718 SuperIO detected.
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
lp0: using parport0 (interrupt-driven).
EDAC MC: Ver: 2.1.0 May 13 2010
ACPI: WMI: Skipping duplicate GUID 05901221-D566-11D1-B2F0-00A0C9062910
ACPI: WMI: Mapper loaded
ppdev: user-space parallel port driver
i2c i2c-0: nForce2 SMBus adapter at 0x2d00
ACPI: I/O resource nForce2_smbus [0x2e00-0x2e3f] conflicts with ACPI region SM00 [0x2e00-0x2e3f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nForce2_smbus 0000:00:01.1: Error probing SMB2.
acx: this driver is still EXPERIMENTAL
acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
acx: running on a little-endian CPU
acx: PCI/VLYNQ module v0.3.37 initialized, waiting for cards to probe...
USB module v0.3.37 initialized, probing for devices...
wait for device ready
requesting firmware image 'tiacx111usbc1B'
usb 1-1: firmware: requesting tiacx111usbc1B
EDAC amd64_edac: Ver: 3.3.0 May 13 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
acx: firmware image 'tiacx111usbc1B' was not provided. Check your hotplug scripts
acx: issue_cmd(cmd:ACX1xx_CMD_WAKE) FAILED
Pid: 1339, comm: modprobe Not tainted 2.6.33-ARCH #1
Call Trace:
[<ffffffffa0284a1b>] acxusb_s_issue_cmd_timeo_debug+0x2fb/0x460 [acx]
[<ffffffffa0284f7e>] acxusb_e_probe+0x3fe/0x840 [acx]
[<ffffffffa000d774>] usb_probe_interface+0xf4/0x1a0 [usbcore]
[<ffffffff81279ac3>] driver_probe_device+0x93/0x1a0
[<ffffffff81279c6b>] __driver_attach+0x9b/0xa0
[<ffffffff81279bd0>] ? __driver_attach+0x0/0xa0
[<ffffffff81278abe>] bus_for_each_dev+0x5e/0x90
[<ffffffff81279799>] driver_attach+0x19/0x20
[<ffffffff812792b7>] bus_add_driver+0xc7/0x2e0
[<ffffffff81279ee1>] driver_register+0x71/0x140
[<ffffffff81357e77>] ? printk+0x3c/0x45
[<ffffffffa000c5e8>] usb_register_driver+0xb8/0x170 [usbcore]
[<ffffffffa0295000>] ? acx_e_init_module+0x0/0x31 [acx]
[<ffffffffa02950e1>] acxusb_e_init_module+0x35/0x37 [acx]
[<ffffffffa0295023>] acx_e_init_module+0x23/0x31 [acx]
[<ffffffff81002179>] do_one_initcall+0x39/0x1a0
[<ffffffff8108efcf>] sys_init_module+0xdf/0x250
[<ffffffff81009f02>] system_call_fastpath+0x16/0x1b
initializing max packet templates
acx: issue_cmd(cmd:cmd) FAILED
Pid: 1339, comm: modprobe Not tainted 2.6.33-ARCH #1
Call Trace:
[<ffffffffa0284a1b>] acxusb_s_issue_cmd_timeo_debug+0x2fb/0x460 [acx]
[<ffffffff81357e77>] ? printk+0x3c/0x45
[<ffffffff811d2726>] ? vsnprintf+0x356/0x610
[<ffffffffa02759e9>] acx_s_init_max_template_generic+0x79/0xd0 [acx]
[<ffffffff8100d480>] ? dump_trace+0x1c0/0x400
[<ffffffff81357e77>] ? printk+0x3c/0x45
[<ffffffffa0275a79>] acx_s_init_packet_templates+0x39/0x1d0 [acx]
[<ffffffff8100e9e0>] ? show_trace+0x10/0x20
[<ffffffff81357ce8>] ? dump_stack+0x72/0x7b
[<ffffffffa027e2ce>] acx_s_init_mac+0x20e/0x530 [acx]
[<ffffffffa0284a23>] ? acxusb_s_issue_cmd_timeo_debug+0x303/0x460 [acx]
[<ffffffffa0284f45>] acxusb_e_probe+0x3c5/0x840 [acx]
[<ffffffffa000d774>] usb_probe_interface+0xf4/0x1a0 [usbcore]
[<ffffffff81279ac3>] driver_probe_device+0x93/0x1a0
[<ffffffff81279c6b>] __driver_attach+0x9b/0xa0
[<ffffffff81279bd0>] ? __driver_attach+0x0/0xa0
[<ffffffff81278abe>] bus_for_each_dev+0x5e/0x90
[<ffffffff81279799>] driver_attach+0x19/0x20
[<ffffffff812792b7>] bus_add_driver+0xc7/0x2e0
[<ffffffff81279ee1>] driver_register+0x71/0x140
[<ffffffff81357e77>] ? printk+0x3c/0x45
[<ffffffffa000c5e8>] usb_register_driver+0xb8/0x170 [usbcore]
[<ffffffffa0295000>] ? acx_e_init_module+0x0/0x31 [acx]
[<ffffffffa02950e1>] acxusb_e_init_module+0x35/0x37 [acx]
[<ffffffffa0295023>] acx_e_init_module+0x23/0x31 [acx]
[<ffffffff81002179>] do_one_initcall+0x39/0x1a0
[<ffffffff8108efcf>] sys_init_module+0xdf/0x250
[<ffffffvᤄpLI|^Yufhp25
....