Heyho
Seit neuestem, ich weiß nicht genau seit wann, da ich beim Boot selten auf den Bildschirm schau, seh ich kein GRUB mehr, keine Kernelausgaben und das System ist nach 3-4 Sekunden beim XDM, was mich sehr verwundert.
Des weiteren musste ich im GRUB den Framebuffer übergeben, damit meine SiS-OnBoard-Grafik mit 16:10-Auflösungen wie 1680x1050 klarkommt; würde ich das nicht tun, so würde ich die glaub ich schon mal erwähnte 8-Teilung des Bildes haben. Das war schon immer beim SiS-X-Treiber bei mir so.
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 2
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd0,1)
kernel /vmlinuz26 root=/dev/disk/by-uuid/b364067e-0759-4d06-9125-e90ccfdd336a ro quiet vga=773
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,1)
kernel /vmlinuz26 root=/dev/disk/by-uuid/b364067e-0759-4d06-9125-e90ccfdd336a ro
initrd /kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="de_DE.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1"
CONSOLEFONT="default8x16"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(acpi-cpufreq powernow-k8 cpufreq_performance cpufreq_ondemand cpufreq_conservative cpufreq_powersave cpufreq_userspace vboxdrv vboxnetflt vboxnetadp)
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="aberdeen"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
#Static IP example
#eth0="dhcp"
eth0="eth0 192.168.2.100 netmask 255.255.255.0 broadcast 192.168.2.255"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.2.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(@syslog-ng network netfs dbus hal @timidity++ @alsa @httpd @mysqld @ntpd @nfs-common @nfs-server @samba @cups vsftpd sshd)
Ich starte den Rechner jedes Mal komplett neu, nutze keinen "Ruhezustand".
Ein anderes Problem dass sich hier schon seit ewig zeigt, jedoch immer häufiger auftritt, ist, dass das System irgendwann nur noch auf der HDD arbeitet und rein gar keine Reaktion auf irgendetwas zeigt. Weder Maus noch Tastatur noch sonstetwas. Das deutet sich stets damit an, dass der Mauszeiger "träge" reagiert. Oft hilft es dann noch, Prozesse abzuschiessen. Wenn ich allerdings nicht schnell genug reagiere, reagiert am Ende nicht einmal mehr SysRQ, und ich muss mit "Reset" neustarten. Dabei ist mir dann zum ersten Mal aufgefallen dass die Kiste extrem schnell bootet und vor allem bis zum X keinerlei Ausgaben mehr zeigt. Am Bildschirm scheint dies nicht zu liegen.
Ich kann allerdings nicht vom X auf ein TTY - Grafikfehler überwiegen dann, obwohl ich ja nur 1024x768 nutze. Manchmal zeigt mir der Bildschirm (ich habe verschiedene ausprobiert) dann "out of range".
[pmedia@aberdeen ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 44
model name : AMD Athlon(tm) 64 Processor 3200+
stepping : 2
cpu MHz : 2200.429
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up extd_apicid pni lahf_lm
bogomips : 4402.22
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
[pmedia@aberdeen ~]$ uname -a
Linux aberdeen 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 AMD Athlon(tm) 64 Processor 3200+ AuthenticAMD GNU/Linux
[pmedia@aberdeen ~]$ lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 761/M761 Host (rev 02)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 190 Ethernet Adapter
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:08.0 IDE interface: Silicon Integrated Systems [SiS] Device 0183 (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter (rev 03)
Swapspeicher nutze ich keinen. Da ich bei solchen "Crashes" stets Speicherintensive Programme offen habe, werde ich als nächstes spaßenshalber mal Swap aktivieren. Dennoch frage ich mich wieso die Maschiene so extrem schnell bootet und keine Ausgaben dabei anzeigt.