lsusb -vv:
Bus 002 Device 002: ID 08ca:0020 Aiptek International, Inc. APT-6000U Tablet
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x08ca Aiptek International, Inc.
idProduct 0x0020 APT-6000U Tablet
bcdDevice 1.00
iManufacturer 1 AIPTEK
iProduct 2 APT-6000U
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 50mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 3
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 390
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 3
Device Status: 0x0000
(Bus Powered)
lshal:
udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_03_0' (string)
info.product = 'APT-6000U Tablet' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial' (string)
info.vendor = 'Aiptek International, Inc.' (string)
linux.device_file = '/dev/bus/usb/002/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3' (string)
usb_device.max_power = 50 (0x32) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'APT-6000U Tablet' (string)
usb_device.product_id = 32 (0x20) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.vendor = 'Aiptek International, Inc.' (string)
usb_device.vendor_id = 2250 (0x8ca) (int)
usb_device.version = 1.0 (1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0'
info.linux.driver = 'aiptek' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0' (string)
usb.max_power = 50 (0x32) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 32 (0x20) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Aiptek International, Inc.' (string)
usb.vendor_id = 2250 (0x8ca) (int)
usb.version = 1.0 (1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'input.mouse', 'input.tablet', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0' (string)
info.product = 'Aiptek' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event5' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_8ca_20_noserial_if0' (string)
input.product = 'Aiptek' (string)
input.x11_driver = 'aiptek' (string)
input.x11_options.Mode = 'absolute' (string)
input.x11_options.SendCoreEvents = 'true ' (string)
input.x11_options.Type = 'stylus' (string)
input.x11_options.USB = 'On' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'nodeadkeys' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0/input/input5/event5' (string)
lsmod:
aiptek 13421 0
usbcore 119636 6 usbhid,aiptek,ohci_hcd,ehci_hcd
dmesg:
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Das Problem:
Es geht nicht. Wenn ich mit dem Stift auf F1 tippe, wird zwar F1 ausgelöst. Aber wenn ich über das Pad fahre mit dem Stift, dann passiert rein gar nichts.
Erkannt wird es offenbar auch, GIMP listet es in den Geräteeinstellungen. Doch es reagiert nicht.
Batterien sind nachweislich in Ordnung.
Hat jemand eine Idee?