Hallo,
ich habe bei uns im Haus den Fernsehrechner von WinXP auf Arch umgestellt (noch einen parallele Installation...) da ich bislang nur positive Erfahrungen mit Arch gemacht habe.
TV-karte wurde auch super erkannt (Twinhan sonstwas...) das einzige Problem ist nun die Fernbedienung.
Sie wird erkannt und es wird ein Device angelegt.
Leider werden die Signale (außer lauter und leiser) nicht ans System weiter geleitet.
Beim Laptop hatte ich selbes Phänomen, da hatte ich xf86-input-synaptics nicht installiert. Leiter weiß ich nicht, was ich hier installieren müsste, oder ob ich total auf dem Holzweg bin.
Unter Ubuntu bei meinem Bruder wird sie erkannt und funktioniert auch.
System ist ein 64bit Arch mit heute aktuellem Kernel 2.6.32.5-1
edit:
es wird KDE genutzt, angefangen bei minimaler KDE Installation und dann langsam ausgebaut.
Wenn ihr mir hilfreiche Tipps geben könntet wäre ich sehr dankbar.
lsusb
Bus 006 Device 004: ID 6253:0100 TwinHan Technology Co., Ltd Ir reciver f. remote control
ls -l /dev/input/by-id/usb-Twinhan*
lrwxrwxrwx 1 root root 9 24. Jan 19:19 usb-Twinhan_Tech_Remote_Control_1111111-event-kbd -> ../event9
lrwxrwxrwx 1 root root 10 24. Jan 19:19 usb-Twinhan_Tech_Remote_Control_1111111-event-mouse -> ../event10
lrwxrwxrwx 1 root root 9 24. Jan 19:19 usb-Twinhan_Tech_Remote_Control_1111111-mouse -> ../mouse3
lshal liefert zu Twinhan noch:
udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_13_1' (string)
info.product = 'Ir reciver f. remote control' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111' (string)
info.vendor = 'TwinHan Technology Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/006/004' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1' (string)
usb_device.bus_number = 6 (0x6) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration = 'USB Remote Control' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 4 (0x4) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Ir reciver f. remote control' (string)
usb_device.product_id = 256 (0x100) (int)
usb_device.serial = '1111111' (string)
usb_device.speed = 1.5 (1.5) (double)
usb_device.vendor = 'TwinHan Technology Co., Ltd' (string)
usb_device.vendor_id = 25171 (0x6253) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'USB Remote Control' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 4 (0x4) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 256 (0x100) (int)
usb.serial = '1111111' (string)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'TwinHan Technology Co., Ltd' (string)
usb.vendor_id = 25171 (0x6253) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1' (string)
info.product = 'Twinhan Tech Remote Control' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1_logicaldev_input' (string)
input.device = '/dev/input/event10' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if1' (string)
input.product = 'Twinhan Tech Remote Control' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event10' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input18/event10' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0' (string)
usb.bus_number = 6 (0x6) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'USB Remote Control' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 4 (0x4) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 256 (0x100) (int)
usb.serial = '1111111' (string)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'TwinHan Technology Co., Ltd' (string)
usb.vendor_id = 25171 (0x6253) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0' (string)
info.product = 'Twinhan Tech Remote Control' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0_logicaldev_input' (string)
input.device = '/dev/input/event9' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_6253_100_1111111_if0' (string)
input.product = 'Twinhan Tech Remote Control' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'evdev' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = '' (string)
linux.device_file = '/dev/input/event9' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input17/event9' (string)