Gut nun akzeptiert wvdial das pw endlich, dennoch bin ich anscheind zu blöd Huawei E220 unter Arch zu nutzen, da kann ich machen was ich will.
Wenn ich da sganze mit wvdial mache bekomme ich jetzt folgendes.
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"ip","internet.t-mobile"
AT+CGDCONT=1,"ip","internet.t-mobile"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Mar 23 19:06:39 2008
--> Pid of pppd: 9113
--> Using interface ppp0
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> Connect time 0.1 minutes.
--> pppd: }+
--> pppd: }+
--> pppd: }+
--> Disconnecting at Sun Mar 23 19:06:42 2008
--> The PPP daemon has died: PPP negotiation failed (exit code = 10)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 10)
und da weiß ich schon nicht was der wxit code 10 zu bedeuten hat. Ich denke mal das er da irgendwie keine Verbindung bekommt oder so. Bei dem ersten Beispiel bin ich nach der Anleitung aus dem englischen ArchWiki gegangen.(
http://wiki.archlinux.org/index.php/Huawei_E220)
Bei dem 2. bin ich nach diesem Tutorial gegangen
http://linux.frankenberger.at/Huawei_E220.html und komme auch nicht weiter
Serial connection established.
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc3a3e9d5> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x88b6577d> <pcomp> <accomp>]
sent [LCP ConfAck id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x88b6577d> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xc3a3e9d5> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xc3a3e9d5]
rcvd [LCP DiscReq id=0x13 magic=0x88b6577d]
rcvd [CHAP Challenge id=0x1 <58b4bf59702bd93838e3b239208f630f>, name = "UMTS_CHAP_SRVR"]
sent [CHAP Response id=0x1 <c13deaa07f1f30f511f97b87de9f481c>, name = "t-mobile"]
rcvd [LCP EchoRep id=0x0 magic=0x88b6577d c3 a3 e9 d5]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
CHAP authentication succeeded
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
rcvd [IPCP ConfReq id=0xa]
sent [IPCP ConfNak id=0xa <addr 0.0.0.0>]
rcvd [IPCP ConfRej id=0x2 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
rcvd [IPCP ConfNak id=0x3 <addr 172.21.22.136> <ms-dns1 193.254.160.1> <ms-dns3 193.254.160.130>]
sent [IPCP ConfReq id=0x4 <addr 172.21.22.136> <ms-dns1 193.254.160.1> <ms-dns3 193.254.160.130>]
rcvd [IPCP ConfAck id=0x4 <addr 172.21.22.136> <ms-dns1 193.254.160.1> <ms-dns3 193.254.160.130>]
rcvd [IPCP ConfReq id=0xb]
sent [IPCP ConfAck id=0xb]
Could not determine remote IP address: defaulting to 10.64.64.64
Cannot determine ethernet address for proxy ARP
local IP address 172.21.22.136
remote IP address 10.64.64.64
primary DNS address 193.254.160.1
secondary DNS address 193.254.160.130
Script /etc/ppp/ip-up started (pid 9060)
Script /etc/ppp/ip-up finished (pid 9060), status = 0x0
Terminating on signal 2
Connect time 0.7 minutes.
Sent 0 bytes, received 0 bytes.
Script /etc/ppp/ip-down started (pid 9067)
sent [LCP TermReq id=0x2 "User request"]
Script /etc/ppp/ip-down finished (pid 9067), status = 0x0
rcvd [LCP TermAck id=0x2]
Connection terminated.