Tag 🙂
Ich hab seit dem update in den letzten Tagen das Problem das mein Wlan ständig auf 1Mb/s gesetzt wird.
Ich dachte als "Lösung" nutz ich IWOPTS im Net-Profil, jedoch wird IWOPTS einfach "überlesen".
Kann mir jemand sagen was ich falsch mache, denn von Hand funzt das ganze.
[root@Mediabox ~]# cat /etc/network.d/buffalo
CONNECTION="wireless"
INTERFACE=wlan0
SCAN="yes"
SECURITY="wpa-config"
ESSID="GNU_Linux"
KEY="not_for_your_eyes"
IP="static"
IFOPTS="192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
DNS1=192.168.1.1
IWOPTS="rate 54M mode managed"
WPA_OPTS="-Dwext"
WPA_CONF="/etc/wpa_supplicant.conf"
[root@Mediabox ~]#
[root@Mediabox ~]# cat /etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="GNU_Linux"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP
group=CCMP
psk="not_for_your_eyes"
}
[root@Mediabox ~]#
[root@Mediabox ~]# /etc/rc.d/net-profiles restart && iwconfig wlan0
:: buffalo down [DONE]
:: buffalo up [DONE]
wlan0 IEEE 802.11bg ESSID:"GNU_Linux"
Mode:Managed Frequency:2.462 GHz Access Point: 00:1D:73:55:1E:1D
Bit Rate=1 Mb/s Tx-Power=14 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:298D-DA3C-139F-F3D3-7B4A-F36A-0B2F-A81D [3] Security mode:open
Power Management:off
Link Quality=30/100 Signal level:-58 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@Mediabox ~]#
[root@Mediabox ~]# iwconfig wlan0 rate 54M && iwconfig wlan0 | grep Rate
Bit Rate=54 Mb/s Tx-Power=14 dBm
[root@Mediabox ~]#
local/netcfg 2.1.3-3
local/kernel26 2.6.29.1-3 (base)
Wlan Treiber = rt70usb